What are the symptoms of transmission vibration?

1 Answers
DeRyder
07/29/25 9:28am
The symptoms of transmission vibration include feeling vehicle shaking during low-speed acceleration and hearing abnormal knocking sounds. The main causes of transmission vibration are: excessive carbon deposits, dirty throttle body or air filter, spark plug failure, and aging engine components. The details are as follows: 1. Spark plug failure causing misfire: This is the most common reason for engine vibration. The problem lies in the engine ignition coil or spark plugs. If the ignition coil malfunctions or spark plugs fail to fire for some reason, the vehicle will experience shaking. Misfire is relatively easy to diagnose - if the vehicle shakes noticeably more than usual during medium-low speed operation and feels sluggish during acceleration, it can basically be determined as engine misfire. 2. Excessive carbon deposits: Too much carbon buildup inside the engine will absorb some fuel during startup, leading to an overly lean air-fuel mixture. The engine only begins normal operation after the carbon deposits become saturated with gasoline. However, when the mixture is ignited, the gasoline absorbed by carbon deposits gets sucked back into the cylinders by vacuum pressure, creating an overly rich mixture. This alternating lean-rich condition causes engine vibration. 3. Dirty throttle body or air filter: A severely dirty air filter restricts sufficient air intake into engine cylinders. The imbalanced air-fuel mixture results in insufficient engine power and vibration. A dirty throttle body may not close properly, causing an overly lean mixture during idle and consequent power loss. 4. Aging engine components: If the engine doesn't vibrate or vibrates only slightly when the hood is opened, the problem isn't the engine itself but worn-out buffer components. Commonly, aged engine mounts fail to provide proper cushioning. Timely replacement is necessary after identifying the faulty parts.
Was this review help?
12
0
Share
More Forum Discussions

What Happens If You Don't Engage the Handbrake When Parking?

Parking without engaging the handbrake can cause the vehicle to roll backward, potentially leading to accidents. The handbrake serves to brake the vehicle when parked on flat or inclined surfaces, preventing it from moving unintentionally when unattended, thereby avoiding traffic accidents. The correct method to engage the handbrake is: 1. Press the handbrake button before pulling it; 2. Apply gentle force when pulling the handbrake; 3. Engage the handbrake to about 70% of its capacity—pulling it all the way to the top can shorten the lifespan of the handbrake cable. The dangers of driving without releasing the handbrake include: 1. The brake pump cannot provide sufficient braking force, potentially stalling the engine; 2. Accelerated wear of the brake discs and hardening of the brake pads due to friction heat; 3. Stretching of the handbrake cable; 4. Leakage of brake fluid from the wheel cylinders, resulting in brake failure.
7
2
Share

What are the methods for disinfecting a car?

Methods for disinfecting a car include using alcohol. Precautions when using alcohol for car disinfection are: 1. Alcohol is a flammable and explosive product, so it should be wiped dry immediately after spraying; 2. Operate in a well-ventilated environment with windows open, focusing on spraying object surfaces and avoiding hidden or hard-to-reach areas inside the car; 3. After disinfection, avoid smoking in the car or closing the windows, as rising temperatures can reach the ignition point of alcohol, potentially leading to explosions or fires; 4. After wiping with alcohol, special attention should be paid to leather seats, as they may be damaged.
4
2
Share

Where are Volkswagen engines produced?

Volkswagen engines are produced in China. Models under the Volkswagen brand include: Golf, Teramont, Magotan, Passat, Lavida, etc. Taking the 2020 Volkswagen Magotan as an example, its body dimensions are: 4865mm in length, 1832mm in width, and 1471mm in height, with a wheelbase of 2871mm, a fuel tank capacity of 66 liters, and a trunk capacity of 533 liters. The 2020 Volkswagen Magotan features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
10
1
Share

How to Check the Vehicle Engine Number?

Querying the vehicle engine number can be done through the following methods: 1. Use the owner's name, communication device, vehicle license, or license plate number to check on the traffic management bureau's website; 2. Check using documents such as the vehicle license, motor vehicle registration certificate, purchase invoice, factory certificate, operation license for commercial vehicles, or vehicle insurance card; 3. The engine number is located near the left spark plug of the car engine, and you can see it by opening the car's hood. Methods for engine maintenance include: 1. Use qualified engine oil; 2. Use qualified coolant; 3. Regularly clean the radiator scale; 4. Regularly remove carbon deposits from the engine; 5. Replace the vehicle's air filter, oil filter, and fuel filter on time; 6. Check if the spark plugs are damaged.
16
5
Share

How to Turn On the Rearview Mirror Heating in a Car?

To turn on the rearview mirror heating in a car, follow these steps: 1. Locate the knob on the left front side of the driver's door; 2. Adjust the knob to the desired position (l, o, r, or the heating symbol). The function of rearview mirror heating is to warm the mirror surface, effectively removing fog and frost, ensuring clear visibility and enhancing driving safety. The principle behind rearview mirror heating involves installing heating elements (electric heating plates or films) inside the mirror lenses. In rainy or snowy conditions, activating the rearview mirror heating function causes the heating elements to rapidly warm up to 35-60 degrees Celsius within minutes, thereby defogging and defrosting the mirrors.
5
2
Share

What are the symptoms of transmission failure?

Transmission failure symptoms include: 1. Transmission warning light illuminated - if the warning light on the dashboard comes on, try restarting the engine to see if it returns to normal. If it doesn't return to normal or if there's gear shifting impact, this usually indicates a genuine transmission system failure requiring roadside assistance; 2. Sluggish response - a properly functioning transmission should shift quickly and accurately to the correct gear; 3. Difficult acceleration - if you notice significantly harder vehicle acceleration, or when pressing the accelerator increases engine RPM but doesn't produce noticeable acceleration, this may indicate transmission fluid leakage.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.