What are the symptoms of the brake failure in Dongfeng Kia K3?

1 Answers
DeclanLee
07/29/25 5:46pm
Dongfeng Kia K3 exhibits the following symptoms when experiencing brake failure: 1. The brake pedal does not rise when pressed, and there is no resistance. Possible causes: lack of brake fluid, leakage in the brake cylinder, pipelines, or joints, or damage to the master cylinder or sub-cylinder components. 2. Poor braking effect even when the brake pedal is fully depressed, with no improvement in continuous braking and the pedal gradually rising. Possible cause: air mixed in the brake system. 3. The brake pedal rises when continuously pressed, with some improvement in braking effect. Possible cause: excessive gap between the friction pads and brake drum. 4. The brake pedal rises when continuously pressed, accompanied by a sinking feeling. Possible causes: oil leakage or overheating of the brake disc. The Dongfeng Kia K3 is the third K-series model introduced by Dongfeng Yueda Kia, with body dimensions of 4600mm in length, 1780mm in width, and 1445mm in height.
Was this review help?
7
2
Share
More Forum Discussions

What are the symptoms of water entering the transmission?

The symptoms of water entering the transmission are: 1. Some screws inside the transmission may rust, and white sediment corrosion may appear in the oil pan; 2. The friction plates absorb water and cannot be repaired; 3. The transmission may experience oil leakage, abnormal noises, and jerking faults. The function of the transmission is: to change the transmission ratio and expand the range of torque and speed changes of the driving wheels, adapting to frequently changing driving conditions, and allowing the engine to operate under favorable working conditions. The maintenance methods for the transmission are: 1. Replace the automatic transmission fluid every 12 months or 20,000 kilometers; 2. Avoid coasting in neutral; 3. Frequently check the fluid level; 4. Do not skip gears when shifting up; 5. Do not forcibly shift to neutral; 6. Do not shorten the idle warm-up time; 7. Avoid gear grinding when shifting; 8. Clean the transmission; 9. Perform regular maintenance on the automatic transmission.
1
5
Share

Where is the air intake of Lavida Plus located?

The engine air intake of Lavida Plus is located on the right side of the engine compartment closest to the windshield. Open the front engine cover to see the filter screen, which is the air intake. Appearance: The new Lavida adopts the new family-style front face. The rear light clusters also feature smoked treatment and LED light sources. The trunk lid is equipped with a slightly upturned rear spoiler, paired with a single-sided dual chrome exhaust pipe and 16-inch aluminum alloy wheels, further enhancing the overall visual impact. Power: The new Lavida is equipped with two engines from the EA211 series: a 1.6L and a 1.4TSI. The 1.6L engine delivers a maximum power of 81kW/5800rpm and a maximum torque of 155Nm/3800rpm. The 1.4TSI engine provides a maximum power of 110kW/5000rpm and a maximum torque of 250Nm/1750-3000rpm.
10
4
Share

How many seconds after the red light turns on does the electronic police camera system start taking photos?

When the red light turns on, the electronic police camera system software is already in operation; when the traffic light turns on, the camera system software shuts down 2 seconds in advance; when the yellow light turns on, the camera system software delays operation by 2 seconds. This method helps reduce the probability of the camera system mistakenly capturing vehicles running red lights. Under the following circumstances, you can apply to the traffic police to cancel the penalty for running a red light: If you run a red light to give way to emergency vehicles such as ambulances, fire trucks, patrol cars, road rescue vehicles, or special vehicles, and if the vehicle owner has a dashcam, the recorded video can be used as evidence to apply to the traffic management department for penalty cancellation. If you run a red light under the guidance of traffic police, in many cases, if there are traffic police directing vehicle movement on-site, you should follow their instructions. If you are captured running a red light under such circumstances, you can apply for cancellation.
7
0
Share

Why is the Ora charging pile flashing red?

Red light flashing is a prompt due to poor network signal, but it does not affect charging. The following are the installation instructions for the Great Wall Ora charging pile: 1. Classification: Charging piles are generally divided into two types based on their ownership: public piles and private piles. Public piles are universal but require payment for electricity and service fees, making the cost relatively high; private piles are only suitable for one's own vehicle and are not universal. 2. Scope of application: When using a public charging pile, make sure to check whether it is suitable for large vehicles or small vehicles, as some old standard piles cannot charge small vehicles, and vice versa. 3. Inspection: Before charging, check that the charging pile equipment is intact, the cables and connectors are in good condition. On rainy days, it is best not to use the charging pile outdoors without a canopy to prevent the risk of electric leakage. After charging is completed, disconnect the charging pile in time to prevent overcharging.
11
4
Share

What are the reasons for high radiator temperature but the fan not working?

The reasons for high radiator temperature but the fan not working are: 1. Electrical failure; 2. Thermostat switch malfunction. The method to check the radiator water level is: 1. Open the radiator cap; 2. There are scale lines and markings on the radiator, just check directly. The steps to add water to the car radiator are: 1. Turn the pressure cap counterclockwise to open it; 2. Fill the coolant to the scale line position; 3. Tighten the pressure cap and ensure it is fully seated. The function of the car radiator: Absorb the heat from the engine block to prevent engine overheating and malfunctions. Precautions for using the car radiator: 1. Prevent the radiator temperature from getting too high; 2. Replace the coolant regularly; 3. Do not use tap water as a substitute for coolant; 4. Choose high-quality diluted water or antifreeze when selecting radiator fluid; 5. Perform regular anti-rust treatment on the radiator; 6. Address radiator malfunctions promptly to avoid causing other issues due to continued use.
7
1
Share

What are the steps for the manual stationary exhaust self-cleaning of the Fengjun 7?

The steps for the manual stationary exhaust self-cleaning of the Fengjun 7 are: 1. Turn on the power without starting the vehicle; 2. Press and hold the regeneration switch without releasing it. The dimensions of the Fengjun 7 are: length 5095mm, width 1800mm, height 1760mm, with a wheelbase of 3050mm. It features a front-engine, rear-wheel-drive layout, with a double-wishbone torsion bar spring independent front suspension and a leaf spring non-independent rear suspension. The Fengjun 7 is equipped with a 2.0T turbocharged engine paired with a 6-speed manual transmission. This engine delivers a maximum power of 120kW and a maximum torque of 330Nm, featuring direct fuel injection technology and an aluminum cylinder head with an iron cylinder block.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.