What are the symptoms of not changing transmission oil?

1 Answers
LaDonovan
07/30/25 4:49am
Symptoms of not changing transmission oil include: 1. The viscosity of the transmission oil will become thinner; 2. Decreased lubrication performance; 3. Reduced sealing performance; 4. Increased resistance and wear; 5. Unstable pressure; 6. Affects the working precision of the hydraulic system; 7. Decreased control precision of the transmission. There are two types of automotive transmissions: 1. Manual transmission: The driver must manually shift the gear lever to change the gear engagement position inside the transmission, altering the gear ratio to achieve speed changes; 2. Automatic transmission: Uses planetary gear mechanisms to change gears automatically based on the degree of throttle pedal and vehicle speed changes, allowing the driver to control speed simply by operating the accelerator pedal.
Was this review help?
12
1
Share
More Forum Discussions

What are the precautions for the first maintenance of Baojun 730?

Before the first maintenance, fully understand whether your car has any other faults or problems, and record them. When registering for the first maintenance, inform the 4S shop of these items that need to be checked. Pay attention to the maintenance time: When picking up the car, the staff at the 4S shop will inform the consumer of the first maintenance time and mileage; the vehicle's maintenance manual will also indicate the first maintenance time and mileage, and the first maintenance can be carried out according to the marked information. Pay attention to the oil used for the first maintenance: Since the vehicle is in the running-in period, the parts have not been fully run-in, and impurities may appear during use, affecting the performance of the oil. It is necessary to replace the oil in time during the first maintenance to avoid a decline in oil performance.
2
4
Share

What to Do If It Rains During the Driving Test?

Solutions for taking the driving test in the rain: Maintain a positive mindset and relieve stress. After getting in the car, use a tissue to wipe the rearview mirrors and test the windshield wipers, adjusting the frequency based on the intensity of the rain. Tips for taking the driving test on a rainy day are as follows: 1. Do not close the car windows too tightly, as this can cause fogging inside the car, obstructing visibility and affecting judgment accuracy. 2. Control your speed when driving in the rain, going slightly slower than during regular training. 3. During the test, avoid sudden acceleration or hard braking. Rain makes the road slippery, visibility poor, and increases the risk of wheel skidding. 4. Turn on the windshield wipers promptly when it rains to maintain clear visibility.
3
4
Share

Can 4-Square-Millimeter Copper Wire Be Used for Vehicle Jump-Starting?

4-square-millimeter copper wire can be used for vehicle jump-starting. Below is an introduction to the 4-square-millimeter copper wire: Application Scope of 4-Square-Millimeter Copper Wire: A 4-square-millimeter copper wire can serve as a jump-start cable. Its diameter is approximately 1.27 millimeters. By twisting two strands of 4-square-millimeter copper wire together, the current capacity can be increased. As long as the current is increased and the voltage remains stable, the power output will also increase, meeting the load requirements and ensuring normal operation. Specific Measures for 4-Square-Millimeter Copper Wire: During the actual operation, the protective cover of the battery must be opened to locate the positive terminal. The red end of the wire should be securely connected to the positive terminal of the battery, ensuring a tight clamp. Then, connect the positive terminal to another positive terminal to measure a voltage of 12 volts.
9
5
Share

What are the reasons for the sudden failure of the Citroen C-Quatre's air conditioning to cool?

The reasons for the Citroen C-Quatre's air conditioning not cooling are: 1. Damage to the piston inside the air conditioning system. 2. Damage to the clutch plate. 3. The engine ECU does not instruct the air conditioning to work. 4. The condenser fins in the air conditioning system are too dirty, causing the pressure and temperature in the system to rise too high. To protect the system, the air conditioning pump stops working, resulting in no cooling. Additional information: The cooling principle of car air conditioning is the same as that of household air conditioning. Both use the principle that R12 or R134a expands rapidly when compressed and released, absorbing a large amount of heat. In the cooling system, the low-pressure vapor of the refrigerant is sucked in by the compressor, compressed into high-pressure vapor, and then discharged to the condenser. The indoor air continuously circulates to achieve the purpose of lowering the temperature.
18
0
Share

What does the DiLink system mean?

DiLink is an intelligent connected vehicle system launched by BYD. The following is a detailed introduction to the DiLink system: 1. DiUI: BYD DiLink fully considers common functions and user personalization, deeply designing various aspects including the main desktop, weather, intelligent voice, air conditioning, Bluetooth calls, imaging, quick access bar, and built-in application interfaces from the dimensions of visual interface and operation logic. Browsing information becomes more intelligent and efficient, ensuring user driving safety. 2. Di Ecosystem: A super ecosystem chain built based on BYD DiLink intelligent connected vehicle system, integrating a multi-dimensional ecosystem including a vast number of automotive APP ecosystems, intelligent voice ecosystems, music car ecosystems, and gaming car ecosystems. 3. Di Cloud: BYD's cloud service Di Cloud is built on mobile internet, vehicle networking, big data, and AI, providing users with comprehensive connected applications through the cloud platform. By installing the BYD Cloud Service APP on their mobile phones, users can achieve various functions such as remote control, vehicle condition monitoring, location viewing, and data applications.
5
2
Share

How to Set the Time on the New Octavia?

The steps to set the time on the new Octavia are as follows: 1. First, start the car and locate the time adjustment button on the dashboard. 2. Press the button, and the time display on the dashboard will change. Release the button to adjust the minute value. 3. After adjusting the minutes, continue holding the time adjustment button to adjust the hour value. 4. Once the hour value is set, keep holding the time adjustment button to enter the display mode. Select 24H to complete the setup. Here is an introduction to the new Octavia: 1. The new car is equipped with a 1.5L engine that meets the China VI emission standards, with a maximum power output of 83kW (113PS) and a peak torque of 145N·m. 2. The exterior and configurations remain the same as the current China V models. It comes standard with features such as ESP electronic stability system, HHC hill start assist, and engine start-stop. Additionally, all models except the entry-level variant are equipped with a 9-inch central control LCD screen multimedia system.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.