What are the symptoms of low engine oil?

1 Answers
LauraDella
07/25/25 9:24pm
Symptoms of low engine oil in a car: insufficient vehicle power, excessive oil consumption. More information about engine oil is as follows: 1. When you find that the engine oil level is too low, try to find a nearby repair shop or gas station to replenish the oil as soon as possible. Remember to use the same type of oil as the original oil and do not mix it with other oils, as this may alter the oil's performance, such as reducing lubrication and cooling capabilities, making it unable to protect the engine effectively. 2. The oil level should not exceed the upper limit on the dipstick, as this can easily increase engine load and affect power. Over time, the engine's exhaust ventilation system may also be damaged, carbon deposits may increase, and excessive oil can lead to oil burning.
Was this review help?
5
5
Share
More Forum Discussions

Should You Turn Off the Engine When Waiting in the Car?

When waiting in the car, fuel consumption also increases, so for economic considerations, it is better to turn off the engine while waiting. Here are some relevant points: 1. Disadvantages of not turning off the engine: In fact, waiting with the engine running can cause damage to the car. When the engine is turned off, it stops running, and the car suffers no loss. However, if the engine continues to idle, it may lead to carbon buildup. Over time, this can result in black smoke emissions and may even produce carbon monoxide. If this gas enters the car, it could cause carbon monoxide poisoning, endangering the safety of passengers inside. Without turning off the engine, it keeps running continuously. 2. Precautions: There are a few other points to note. When waiting in the car, always remember to lock the central locking system. Some drivers may forget to lock the doors after passengers exit the vehicle. In such cases, the doors can be opened from the outside at any time, even if you are inside the car. This could lead to someone unintentionally opening the rear door and stealing valuables from the car. Therefore, even when waiting, it's important to lock the central locking system and keep valuable items close to you to avoid unnecessary financial losses.
9
5
Share

How Often Should a Van Have Its Oil Changed?

Generally, the oil should be changed once the recommended mileage is reached. For some high-end vehicles, an oil change reminder will appear when the mileage is due. Typically, the break-in period for a new car is 2,500 to 3,000 kilometers, while the standard interval is 5,000 kilometers, depending on driving habits and oil grade. The importance of oil changes. Engine oil is as vital to an engine as blood is to the heart. Engine oil contains various additives that effectively protect the engine's critical moving parts, ensuring smooth operation. Oil change intervals. When purchasing a car, the manufacturer provides a maintenance manual that specifies the recommended oil change mileage and intervals, which for most vehicles range between 5,000 to 10,000 kilometers. The oil change interval for a car is typically between 5,000 to 10,000 kilometers or every six months to a year. Introduction to engine oil: 1. Engine oil, also known as motor lubricant, serves to lubricate the engine, reduce friction, assist in cooling, and prevent rust and corrosion, often metaphorically referred to as the 'blood' of a car; 2. Engine oil generally consists of two components: base oil and additives. The base oil is the primary constituent, determining the fundamental properties of the lubricant, while additives enhance and compensate for any performance shortcomings of the base oil.
18
4
Share

Is Higher Octane Gasoline Always Better?

Higher octane gasoline is not always better. The appropriate octane rating should be selected based on the engine's compression ratio. Here is relevant information about gasoline octane ratings: 1. Regulations: In December 2011, Beijing proposed changing gasoline grades from "90#, 93#, 97#" to "89#, 92#, 95#", while stipulating sulfur content must not exceed 0.001%. 2. Differences in octane ratings: Higher-grade fuel burns slower with lower combustion knock, requiring engines with higher compression ratios. Conversely, lower-grade fuel burns faster with greater combustion knock, suitable for engines with lower compression ratios.
6
0
Share

What are the annual inspection exhaust emission standards?

Annual inspection exhaust standards: Carbon monoxide: A (700mg/km); B (500mg/km); Non-methane hydrocarbons: A (68mg/km); B (35mg/km); Nitrogen oxides: A (60mg/km); B (35mg/km); PM fine particles: A (4.5mg/km); B (3mg/km). General process of vehicle exhaust testing: 1. Information entry: Computer enters information, registers vehicle details, then assigns inspection lanes based on vehicle characteristics. This process is fully automated by the computer. 2. Designated inspection lane: Dispatchers direct staff to drive vehicles to assigned lanes. Supervisors have no authority to change inspection lanes. 3. Lane confirmation: Control room verifies if vehicles enter correct lanes. Next steps cannot proceed without confirmation. 4. Exhaust testing: Technicians follow computer prompts for proper operation. Successful testing requires correct procedures. Results are compared against standard values, then uploaded to servers. 5. Payment: Finally pay at environmental testing fee counter. Non-compliant vehicles require rectification before retesting. Compliant vehicles receive environmental certification marks.
16
5
Share

What are the two types of caliper disc brakes?

Caliper disc brakes can be divided into two types: fixed caliper disc brakes and floating caliper disc brakes. Here is an introduction to the advantages of disc brakes: 1. Better heat dissipation: Compared to drum brakes, disc brakes are less likely to experience brake fade and failure when braking continuously. 2. Minimal thermal expansion: The thermal expansion of the brake disc in the thickness direction is extremely small, and the change in size after heating does not increase the travel of the brake pedal. 3. Rapid system response: The disc brake system responds quickly, allowing for high-frequency braking actions, making it more suitable for the requirements of ABS systems.
17
0
Share

How to reset the maintenance light on a Suzuki Alto?

Suzuki Alto maintenance light reset method is as follows: 1. First, turn the ignition switch of the Alto to ON mode, which is a prerequisite for resetting. 2. Briefly press the "MODE" button on the right side of the instrument panel until the information display switches to the remaining range display. 3. During the remaining range display, press and hold the "MODE" button for more than 5 seconds, and the display will show "OIL" for 2 seconds. 4. Release the indicator selection and quickly press the button 5 times consecutively within 3 seconds. After flashing 3 times, the light will go off, indicating that the maintenance light has been successfully reset.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.