What are the symptoms of insufficient engine oil?

2 Answers
DanielaMarie
07/24/25 10:39pm
The symptoms of insufficient engine oil are: 1. Increased noise; 2. Accelerated engine wear; 3. Abnormal vibration and reduced power; 4. Increased fuel consumption. Engine oil plays roles in lubricating and reducing friction, assisting in cooling, sealing against leaks, preventing rust and corrosion, and cushioning shocks. Effects of overfilling engine oil: 1. Impacts engine performance; 2. Causes carbon buildup; 3. Oil additives may reduce the conversion efficiency of the catalytic converter. Precautions for changing car engine oil: 1. Drain oil when hot for better fluidity; 2. Fill to the dipstick mark; 3. Select oil based on driving conditions, frequency, and engine requirements.
Was this review help?
10
2
Share
Layla
08/10/25 3:06pm
Insufficient engine oil can cause some noticeable symptoms. With over a decade of driving experience, I've encountered this issue before. Firstly, the engine may produce abnormal noises, resembling metal friction sounds, especially noticeable during acceleration. This happens because inadequate oil levels lead to insufficient lubrication of internal engine components, causing rough operation. Secondly, the oil pressure warning light on the dashboard may illuminate, indicating low oil pressure. If ignored for too long, the engine temperature tends to rise, potentially triggering an overheating alarm. Once, I overlooked it and noticed increased fuel consumption and reduced vehicle power. Upon checking with the dipstick, the oil level was indeed much lower. It's advisable to develop a habit of regularly checking oil levels and topping up as soon as a shortage is detected—don't delay too long, or severe wear could lead to expensive repairs. Fellow car enthusiasts often say that addressing minor issues promptly can save big money.
Was this review help?
17
2
Share
Expand All
More Forum Discussions

Is the engine of the Changan Yuexiang V3 from Suzuki?

The engine of the Changan Yuexiang V3 is not from Suzuki; it uses an engine independently developed by Changan. Below are the relevant details about the Changan Yuexiang V3: 1. The Changan Yuexiang V3 is a compact sedan under the Changan brand, equipped with two engines: a 1.3L naturally aspirated engine and a 1.4L naturally aspirated engine. 2. The 1.3L naturally aspirated engine of the Changan Yuexiang V3 delivers 94 horsepower and a maximum torque of 121 Nm, with the maximum torque achieved between 4,000 to 5,000 rpm and the maximum power at 6,000 rpm. 3. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 5-speed manual transmission. 4. The 1.4L naturally aspirated engine of the Changan Yuexiang V3 produces 101 horsepower and a maximum torque of 135 Nm, with the maximum torque achieved between 3,500 to 4,500 rpm and the maximum power at 6,000 rpm.
14
1
Share

Does the Changan CS75 have an automatic transmission?

Changan CS75 has automatic transmission models. There are five automatic transmission models available: 280T Automatic Zhihui Type, 280T Automatic Jingzhi Type, 280T Automatic Yazhi Type, 280T Automatic Ruizhi Type, and 280T Automatic Lingzhi Type. Below is some relevant information about the CS75: The Changan CS75 is positioned between the CS55 and CS95, classified as a compact SUV. The CS75 is equipped with Bluecore series engines. In terms of power, the CS75 offers two engine options: a 2.0L naturally aspirated engine with a maximum power output of 158 horsepower, and a 1.8L turbocharged engine with a maximum power output of 177 horsepower and a peak torque of 230N·m. For transmission, it is paired with a 6-speed manual transmission or Aisin's new-generation 6-speed automatic transmission.
1
0
Share

Why is the coolant temperature warning light on in the Verna?

There are five main reasons for the coolant temperature warning light to illuminate in the Verna. Below are the detailed explanations: 1. Insufficient or inappropriate coolant: Fails to effectively dissipate heat generated by engine components, leading to overheating. 2. Inadequate cooling surface area: Diesel engines are designed with cooling surface areas matched to power and load. Since most coolant in water-cooled diesel engines consists of water mixed with ethylene glycol, substandard coolant quality can cause significant scale buildup in cooling pipes, blocking them and reducing cooling efficiency. 3. Thermostat failure: The thermostat automatically adjusts the flow of coolant to the radiator based on temperature, altering the circulation range to regulate cooling system capacity and maintain optimal engine operating temperatures. A faulty thermostat may prevent the cooling system from entering full circulation mode, causing temperature rise. 4. Cooling fan malfunction: During high-speed operation, heat cannot be efficiently transferred to the coolant, impairing heat dissipation and leading to increased coolant temperature, potentially resulting in boiling over. 5. Delayed fuel injection timing: Unburned diesel can cause excessive diesel engine temperatures, and increased cylinder head temperatures may also lead to engine coolant overheating.
4
3
Share

How Many Types of Reducers Are There?

There are various types of reducers with different models, each serving different purposes. Below is an introduction to the types of reducers: 1. According to the transmission type, they can be divided into gear reducers, worm reducers, and planetary gear reducers. 2. Based on the number of transmission stages, they can be classified as single-stage and multi-stage reducers. 3. According to the gear shape, they can be categorized as cylindrical gear reducers, bevel gear reducers, and bevel-cylindrical gear reducers. 4. Based on the arrangement of the transmission, they can be further divided into expansion-type, split-type, and coaxial reducers. A reducer is an independent component composed of gear transmission, worm transmission, or gear-worm transmission enclosed in a rigid housing. It is commonly used as a speed-reducing transmission device between the prime mover and the working machine. It plays a role in matching speed and transmitting torque between the prime mover and the working machine or actuator, and is widely used in modern machinery. Reducers are generally used in low-speed, high-torque transmission equipment. The high-speed power from motors, internal combustion engines, or other sources is reduced by meshing the small gear on the input shaft of the reducer with the large gear on the output shaft to achieve speed reduction. Ordinary reducers also use several pairs of gears based on the same principle to achieve the desired reduction effect. The ratio of the number of teeth between the large and small gears is the transmission ratio.
8
4
Share

Is it normal for a 4S dealership to require full payment upfront and pick up the car a few days later?

It is normal for a 4S dealership to require full payment upfront and arrange for car pickup a few days later. Below is a detailed introduction about 4S dealerships: Overview: A 4S dealership, short for Automobile Sales Service Shop 4S, is a car sales enterprise that integrates four main services: vehicle sales (Sale), spare parts (Sparepart), after-sales service (Service), and information feedback (Survey). Characteristics: 4S dealerships are built by dealers according to the standards set by car manufacturers. They form a brand alliance with car manufacturers, representing the brand culture, embodying brand value, maintaining brand loyalty, and establishing the brand's reputation and credibility for the car manufacturers.
15
4
Share

Does the glass replaced at a 4S store have the original factory mark?

Some glass replaced at 4S stores may have the original factory mark, while others may not. This situation is quite normal. Although the replaced glass may not bear the original factory mark, its quality is reliable and won't easily cause issues. Car owners need not worry too much about this. Below is an introduction to car maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle upkeep. The scope of car maintenance: Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. The purpose of car maintenance: The goal of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.