What are the symptoms of fuel injector leakage?

2 Answers
DeCamilla
07/25/25 2:10pm
The fuel injector is an electromagnetic valve that controls the formation of fuel spray into the engine by opening and closing, which helps the fuel burn more fully. The symptoms of fuel injector leakage are as follows: 1. The engine idles unevenly; 2. Gasoline dripping into the cylinder will make the mixture too rich, making it difficult to start the engine; 3. The engine noise increases; 4. The throttle response is not sensitive, and acceleration is unstable; 5. Black smoke comes out of the exhaust pipe, and the piston rings wear out faster. The causes of fuel injector leakage are as follows: 1. The contact surface between the injector hole and the needle valve is incomplete under the action of the pressure regulating spring; 2. The pressure spring loses its function, resulting in insufficient closing pressure; 3. Poor filtration of gasoline.
Was this review help?
2
2
Share
AdrianLee
08/11/25 9:01pm
I remember when the fuel injector was leaking, the car would idle particularly rough, feeling as uncomfortable as sitting on a massage chair. Starting the engine also became difficult, requiring several presses on the accelerator to get it going. A strong gasoline smell was noticeable, especially after parking in the garage. Fuel consumption would inexplicably rise, burning an extra two to three liters per hundred kilometers, which also lightened the wallet. In terms of emissions, exhaust smoke might increase, making it easier to fail environmental inspections. More seriously, oil stains could be seen on the ground or in the engine bay. If not addressed promptly, sparks could cause a fire. I once took it to a repair shop and found out it was due to aging seals. Replacing them cost a bit, but early detection is better. It's advisable to regularly check the fuel injector area and develop good habits.
Was this review help?
8
5
Share
Expand All
More Forum Discussions

How Long Does the Turbocharger of Volkswagen Passat Last?

The lifespan of the Volkswagen Passat turbocharger is approximately 250,000 kilometers. The turbocharger consists of an intake turbine and an exhaust turbine, serving as a core component of the engine. Taking the 2020 Volkswagen Passat as an example, it belongs to the midsize car category with body dimensions of: length 4933mm, width 1836mm, height 1469mm, wheelbase 2871mm, fuel tank capacity 68.5 liters, and curb weight 1470kg. The 2020 Volkswagen Passat features a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, and maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
9
3
Share

What off-road vehicles does FAW-Volkswagen have?

FAW-Volkswagen off-road vehicles include Tacqua, T-Roc, and Tayron. Below is relevant information about the T-Roc's exterior and powertrain: Exterior: It is a very stylish compact SUV with body dimensions of 4318mm in length, 1819mm in width, and 1582mm in height, and a wheelbase of 2680mm. Powertrain: The T-Roc is equipped with three engines: a 1.2-liter turbocharged engine, a low-power version 1.4-liter turbocharged engine, and a high-power version 1.4-liter turbocharged engine, paired with a dry dual-clutch transmission. The front suspension of this vehicle uses a MacPherson independent suspension, and the rear suspension employs a multi-link independent suspension.
13
3
Share

What level of SUV is the CHR?

The CHR is classified as a subcompact SUV. The positioning of SUV models, ranked from highest to lowest, is as follows: full-size SUV, mid-size SUV, compact SUV, and subcompact SUV. The classification of vehicle levels requires consideration of multiple data points and cannot be determined by a single factor alone, such as the vehicle platform, wheelbase, body dimensions, vehicle configuration, or powertrain. The CHR has body dimensions of 4405mm in length, 1795mm in width, and 1565mm in height, with a wheelbase of 2640mm. The coupe series models measure 4475mm in length. All models are equipped with a 2.0-liter inline 4-cylinder naturally aspirated engine, paired with a CVT continuously variable transmission, featuring hybrid fuel injection and front-wheel drive. For suspension, the front uses a MacPherson strut independent suspension, while the rear employs a double-wishbone independent suspension.
9
1
Share

How to Open the Trunk of Toyota Prado TX?

Toyota Prado TX trunk opening method: There is a switch handle inside the trunk with a button; simply reach in and pull the door handle to open it. The Toyota Prado is a large SUV launched by Toyota, also known as the Toyota Land Cruiser Prado. There are several models of the Toyota Land Cruiser Prado, namely TX, VX, and TXL, distinguished by different identifiers at the rear of the vehicle. The VX model is the high-end version, offering numerous practical features such as a navigation system and air suspension, which enhances the vehicle's off-road capability. The rear of the VX model also includes a full-size spare tire. The TXL model is the standard version of the Land Cruiser Prado, sufficient for everyday driving. The TX model is the base version, often referred to as the 'budget' model, which does not come with a full-size spare tire at the rear, and some practical features require additional installation by the owner.
12
2
Share

What to Do When the Fabric on the Car Roof Falls Off?

You can go to an auto repair and beauty shop for maintenance, or you can fix it yourself. Here is more information about car roof fabric: 1. Introduction: (1) The car roof fabric is an important part of the car's roof. (2) Its main function is to improve the interior decoration, while the composite fabric of the car roof can also enhance the insulation effect with the outside, reduce interior noise, improve sound absorption, and enhance the comfort and safety of passengers. 2. Reasons for detachment: (1) Edge detachment of the roof fabric is likely due to aging of the velvet sponge, causing the edges to fall off. (2) If the middle of the roof collapses, you can choose to fix it with clips. (3) For large-scale detachment of the roof fabric, you need to remove the old fabric, clean the surface of the aged sponge, prepare a new piece of roof fabric, and use special roof adhesive. Apply the adhesive on both sides, let it dry for 3-5 minutes, and then bond.
1
2
Share

Where is the vehicle bumper located?

The vehicle bumper is located at the front and rear of the vehicle, referred to as the front bumper and rear bumper respectively. The bumper consists of an outer panel, cushioning material, and crossbeam, serving the following purposes: 1. Safety protection; 2. Absorbing external impacts; 3. Protecting pedestrians; 4. Decorative function; 5. Improving the vehicle's aerodynamics. The bumper painting process includes: 1. Cleaning the bumper thoroughly; 2. Drying off moisture; 3. Surface spraying; 4. Sanding and wiping clean; 5. Flame treatment; 6. Electrostatic dust removal; 7. Spraying operation; 8. Applying gray primer; 9. Spraying the pre-mixed color paint, followed by clear gloss paint, then polishing after baking.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.