What are the symptoms of excessive fuel pressure?

2 Answers
GiaLee
07/29/25 4:21am
Excessive fuel pump pressure can disrupt normal lubrication conditions. Factors such as excessive oil viscosity, deterioration and gumming, clogged filters and oil passages, or improperly adjusted or stuck pressure relief valves can all lead to excessively high oil pressure. Below are relevant details: 1. Fuel Pump: The fuel pump is a crucial component of the automobile's fuel supply system. If it fails to operate while driving, it can directly prevent the vehicle from moving. Poor performance may result in sluggish acceleration. Failures often occur without warning, making the vehicle unable to start, which is inconvenient to handle. Therefore, timely detection, diagnosis, and resolution of issues are essential. 2. Hazards: Fuel serves to cool and lubricate the fuel pump. Ignoring low fuel warnings reduces the cooling and lubrication effects, leading to damage. Impurities in low-quality fuel can clog the fuel supply system and cause wear and damage to the pump. Early fuel pump failures are often caused by the use of substandard fuel.
Was this review help?
7
4
Share
McMarcus
08/12/25 8:05am
I've been driving for over a decade and have encountered high fuel pressure issues several times. When the car starts, the engine shakes violently at idle, as if vibrating. During acceleration, it feels particularly weak, with delayed throttle response, making the car seem powerless. Fuel consumption also increases noticeably - what used to be 500 km per tank now might only reach 400 km. The exhaust emits a pungent smell and sometimes black smoke. Within a few days, the check engine light on the dashboard comes on, which is really annoying. It's best to go to a repair shop immediately to check the pressure regulator or sensors. Otherwise, prolonged operation like this can damage fuel injectors or cause more serious failures. In short, don't delay when you notice these symptoms - safety first.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

Does the Hyundai Elantra make a sound when locking the car?

The original Hyundai Elantra does not make a sound when locking the car. Here is the method to set the locking horn: 1. To set the locking horn for the Elantra, you need to install an anti-theft device. Generally, the factory settings only include central locking without an anti-theft device. 2. Connect the anti-theft horn inside the door, wiring it to the locking switch. When you press the lock button, the horn will also sound. Here is some related information about the Hyundai Elantra: 1. In terms of dimensions, the Hyundai Elantra is a compact car with a length of 4570mm, width of 1775mm, height of 1445mm, and a wheelbase of 2700mm. It is a 4-door, 5-seater sedan. 2. In terms of power, the car is equipped with a 1.6L engine with natural aspiration, producing a maximum horsepower of 128ps and a maximum torque of 156nm. The transmission is a 6-speed manual, with front-wheel drive and electric power steering.
3
1
Share

What tires are used for the 10th generation Accord?

Here is a brief introduction to the tires used for the 10th generation Accord: 1. The tire specification for the 10th generation Accord is 225/50R17 94V. 2. The original tire brand is Michelin PRIMACY 3. 3. The wheel hub is internally equipped with damping adhesive, and the openings on the spokes connect to the openings on the side of the tire, which helps reduce wind noise to some extent while driving. Below is extended information about the tire model: 1. The string combination 225/50R17 94V can be seen on the tire. 225 refers to the tire width of 225mm. 2. 50 represents the aspect ratio of the tire at 50%. 3. R stands for radial tire, with the international code for radial tires being 'R', commonly known as 'steel-belted tires'. 4. 17 indicates the diameter of the wheel rim at 17 inches. 5. 94V represents the tire load index, with V being the speed rating of the tire.
4
4
Share

What is the reason why the Baojun 730 suddenly cannot shift gears while running?

Here are the specific reasons why the Baojun 730 cannot shift gears: 1. Failure of the P-gear locking solenoid valve. For safety reasons, to prevent the vehicle from accidentally shifting into other gears when starting, there is a P-gear solenoid valve that needs to receive the signal from the brake pedal to release. These two components are related, and if either one fails, it will prevent the gear lever from being pushed out of the P-gear and shifting into other gears. 2. Internal failure of the gear lever assembly. The internal gears of the gear lever are worn out, causing the gear lever to get stuck and making it difficult to pull forward or backward, resulting in the inability to shift gears or difficulty in shifting. 3. Incomplete clutch disengagement. This may be caused by failure of the clutch disc and clutch pressure plate, requiring replacement of the clutch three-piece set: friction disc, pressure plate, and release bearing. 4. Debris in the transmission oil affecting the gear shifting of manual transmission cars.
15
0
Share

Which Country is the Getrag Transmission From?

Getrag transmissions are from Germany, but the company has established branches in China. Getrag (Jiangxi) Transmission System Co., Ltd. is a joint venture between Germany's Getrag Group and Jiangling Motors Group, serving as a provider of transmission technology products and services. It officially commenced operations in January 2007 in Nanchang, Jiangxi. Getrag transmissions are used in various domestic vehicle models, such as the Haval M6, which employs either a 6-speed manual transmission or a 7-speed wet dual-clutch transmission. A manual transmission is a gear-shifting device used to alter the engine's speed and torque delivered to the drive wheels, enabling the vehicle to achieve different levels of traction and speed under various conditions like starting, climbing hills, turning, and accelerating. For daily use of Getrag transmissions, the following points should be noted: Do not delay changing the transmission oil for extended periods. Prolonged failure to change the transmission oil can damage internal components such as bearings and the housing. Avoid coasting in neutral for long durations. While driving manual transmission vehicles, many experienced drivers may coast in neutral, but for automatic transmission vehicles, this can cause overheating and create a jolt when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Some drivers, aiming for smooth operation, may shift into reverse while the vehicle is still moving, which can severely damage the transmission gears and lead to issues like gear grinding over time. Do not frequently climb steep slopes in Drive (D). Automatic transmission vehicles can overheat under high load or shift too early, resulting in insufficient power for climbing. In such cases, use manual mode to lock in lower gears or switch to sport mode to protect the transmission. Avoid long-distance towing. If an automatic transmission vehicle breaks down, use a flatbed tow truck to transport it in Neutral (N) rather than towing it directly with a rope or another vehicle.
17
1
Share

How to set the horn sound when locking the Atz?

The method to set the horn sound when locking the Atz is as follows: 1. Turn on the horn sound when locking: You can use the remote key to turn on the horn sound when locking, which is to press the unlock and lock buttons simultaneously for 3 seconds. The light will flash once, and then only the light will flash without the horn sound. 2. Restore the horn sound: To restore, press the lock and unlock buttons simultaneously for 3 seconds again, and the light will flash once. 3. Turn off the horn sound when locking: Settings - Sound - Screen lock sound - Play sound when locking and unlocking the screen. The following is an introduction to other horn sounds: 1. Electromagnetic vibration to produce sound: The electromagnetic coil attracts the moving contact switch of the relay to close, and the current will flow to the horn. The current makes the electromagnet inside the horn work, thus causing the diaphragm to vibrate and produce sound. 2. Air horn: The air horn is mainly used in heavy-duty trucks with air brake systems. The electric horn has the characteristics of simple structure, small size, light weight, pleasant sound, and easy maintenance, so it is widely used in small and medium-sized vehicles.
10
0
Share

What is the fuel tank capacity of the Tayron 330 in liters?

The fuel tank capacity of the Tayron 330 is 60 liters, as officially announced. Owners of the Tayron 330 can also check this information on the vehicle's configuration sheet. The Tayron 330 requires 95-octane fuel, with a fuel consumption of 6.8L per 100 kilometers. A full tank can cover a distance of approximately 882 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel gauge accurately reflects the remaining fuel. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. In actual refueling situations, the amount of fuel added may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safe fill level, leaving some space between the safe fill level and the tank opening. This space ensures that the fuel can expand safely when temperatures rise without overflowing. If fuel is added up to the tank opening, the actual refueling amount may exceed the marked tank capacity.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.