What are the symptoms of damaged motorcycle clutch plates?

1 Answers
MacAnna
07/29/25 11:17pm
When the clutch plates of a motorcycle are damaged, the clutch plates will slip, and the power generated by the engine will not be fully transmitted to the wheels, resulting in symptoms such as insufficient power and increased fuel consumption. There are many phenomena of burnt clutch plates, such as a burnt smell, the clutch plates slipping without providing sufficient acceleration, decreased power, complete disengagement of the clutch, clutch shuddering, a soft pedal feel, and a noticeable drop in the vehicle's power. For example, the throttle position that used to reach 80 km/h might now only achieve 70 km/h, difficulty in engaging gears, or unusual noises when shifting gears. Clutch engagement point rises: When starting the vehicle, you need to lift the clutch pedal higher than before. For instance, if it used to engage at 1 cm, it might now require 2 cm. This is likely due to the clutch plates becoming thinner. Feeling a drop in vehicle power: Even when the engine shows no abnormalities, the vehicle feels weak during starts or climbing hills. High engine RPM without corresponding power output indicates clutch slipping. Hearing metal grinding noises when pressing or releasing the clutch pedal is likely due to severely worn clutch plates. When starting or releasing the clutch, you may feel a jerking motion or a lurching sensation as the car moves forward or backward. If the pressure plate, clutch operation, or clutch release feels rough or sticky, the clutch plates need replacement. A burnt smell when pressing the clutch pedal is a symptom of burnt clutch plates, indicating severe wear at this stage.
Was this review help?
12
0
Share
More Forum Discussions

How to Turn on the Heater in Changan Oshan X7?

The heater in Changan Oshan X7 can be turned on via the central control screen. Below is some information about Changan: 1. Introduction: Chongqing Changan Automobile Co., Ltd. is an automotive company engaged in development, manufacturing, and sales, originating from the Shanghai Arsenal established in 1862. The company was officially registered on October 31, 1996. 2. Production: Its main products include a full range of passenger vehicles, small commercial vehicles, light trucks, minivans, and medium to large buses, as well as a full range of engines. In 1996, the company was listed on the Shenzhen Stock Exchange. 3. Development: On April 20, 2021, Changan Automobile released its 2020 financial report, showing that the company achieved an operating income of 84.56 billion yuan, a year-on-year increase of 19.79%; the net profit attributable to shareholders of the listed company was 3.32 billion yuan, a year-on-year increase of 225.6%, turning losses into profits.
17
3
Share

Is it necessary to maintain the car at a 4S shop after the warranty expires?

After the car's warranty period expires, it is not recommended to go to a 4S shop for maintenance because the cost is too high. However, during the warranty period, it is still advisable to go to a 4S shop for maintenance, as quality issues with the car are quite common. Quality issues are not something you can control, and you may not be clear about which issues fall under quality problems. During the warranty period, if you go to a 4S shop for maintenance, any repairs caused by quality issues will be free of charge. Below is an introduction to car maintenance: Appearance check: Before driving, check the doors, hood, trunk, and glass condition, inspect the body for damage, whether the body is tilted, and if there are any oil or water leaks. Engine and various fluids: Check the fixation of engine components, inspect the engine's joints for oil or water leaks. Check and adjust the tightness of belts, inspect the fixation of various pipes and wires. Check and top up engine oil, coolant, and battery electrolyte. Tires:
20
3
Share

What Causes the Throttle Pedal Noise in Geely Xingrui?

If there is oil contamination inside the transmission, an improperly secured air filter, or issues with the oil-gas separator, it may cause abnormal noise from the transmission oil pump. It is recommended to visit a 4S shop for a detailed inspection and repair as soon as possible. Below are specific details: 1. Brand: Geely Xingrui is a new compact sedan under Geely Auto, the first sedan based on Geely's CMA Super Architecture, marking the prelude to the "Technology Geely 4.0 Era." It made its official debut at the Beijing Auto Show on September 26, 2020. 2. Xingrui Engine: The Xingrui is equipped with a Volvo Drive-E series 2.0TD engine paired with a 7DCT transmission, delivering a maximum power of 190 horsepower and a peak torque of 300 N·m. Benefiting from the CMA architecture, it features a MacPherson front suspension, an E-type multi-link independent rear frame, ZF DP-EPS power steering system, ITT brake pads, and long-travel shock absorbers, providing strong grip and excellent cornering handling.
18
0
Share

What are the causes of Peugeot 3008 transmission failure?

Peugeot 3008 transmission failure causes: There may be a fault in the power electronic control system, possibly due to a faulty connection line of a transmission sensor; lack of automatic transmission fluid; automatic transmission overheating or failure to increase starting speed caused by a slipping one-way clutch, etc. Functions of the transmission: 1. Change the transmission ratio: Meet the traction needs under different driving conditions, allowing the engine to operate under favorable conditions as much as possible and meet possible driving speed requirements. 2. Enable reverse driving: Used to meet the need for the vehicle to drive in reverse. The engine crankshaft generally only rotates in one direction, while the vehicle sometimes needs to reverse, so the reverse gear set in the transmission is often used to achieve reverse driving. 3. Interrupt power transmission: When the engine starts, idles, the vehicle shifts gears, or needs to stop for power output, the power transmission to the drive wheels is interrupted. 4. Enable neutral gear: When the clutch is engaged, the transmission can output no power. For example, it ensures that the driver can release the clutch pedal and leave the driver's seat without the engine stalling.
8
1
Share

Why Do Various Warning Lights Appear After Vehicle Inspection?

Various warning lights appearing after a vehicle inspection may be due to the inspector abruptly slamming on the brakes or accelerator during the brake inspection, or forcefully pulling the handbrake during a flatbed brake test. This can cause the vehicle to misinterpret the driver's actions as problematic, triggering the warning lights as a reminder. Vehicle inspection precautions: 1. Check for traffic violations: Before the inspection, check online with the traffic management bureau for any traffic violations on your vehicle. If there are any, handle them promptly and verify online until no violations are shown. 2. Pay attention to the weather: Avoid scheduling inspections during snowy or rainy weather, as wet wheels cannot accurately reflect the true braking force. 3. Check if a fire extinguisher is in the trunk: Note: Sometimes they will check if the fire extinguisher is expired and if a warning triangle is present. If your vehicle lacks these, prepare them in advance. 4. Test the braking function: Before the inspection, find a flat road and perform several emergency brakes at speeds of 20~40 km/h. The purpose is to activate the braking system so that it can exert maximum braking force during the inspection and pass smoothly.
10
4
Share

What is the purpose of the shark fin on BMW roofs?

BMW's shark fin serves the following purposes: 1. Preventing rear-end collisions: The anti-rear-end function is mainly evident during night driving. Most of the time, the leading vehicle uses brake lights to alert the following vehicle to slow down. Since most shark fins are equipped with LED light-emitting devices, they will continuously flash when the driver applies the brakes. This flashing light source has a significant warning effect on the human eye, effectively reminding the following vehicle to slow down and thus preventing rear-end accidents. 2. Reducing air resistance and turbulence: Cars encounter air resistance while driving, and the faster the speed, the greater the resistance. Air resistance can affect the car's speed and increase fuel consumption to some extent. After installing the shark fin on the roof, the airflow can be disrupted. Conventional antennas not only reduce resistance but also create vortices. After replacing them with shark fins, air resistance and noise are reduced. To a certain extent, it can also lower fuel consumption by 3%. 3. Absorbing static electricity: The small tail standing on the roof is actually a static discharger. During winter or dry autumn, static electricity can easily accumulate on the car body. If static electricity is not handled, it may cause trouble for the owner and, more dangerously, pose a threat at gas stations. BMW's shark fin can absorb static electricity to solve such problems.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.