What are the symptoms of damaged engine mounts?

How to Use the Windshield Wipers in the Car?

By pushing the control lever up or down, you can adjust the wiping state of the windshield wipers. If set to automatic mode, you can rotate the adjustment knob to change the sensitivity of the rain sensor, thereby adjusting the wiping frequency of the wipers. Below are detailed explanations about the windshield wipers: 1. Working Principle: The motor on the wiper drives the output through the worm gear on the armature shaft and then drives the output gear via the idler and idler shaft. The output arm connected to the wiper linkage is then manipulated by the output shaft. When the motor rotates, the output arm and linkage are driven to move back and forth. 2. Main Function: The windshield wiper is a device used to wipe away raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety.

14

2

Share

Why is the tire pressure monitoring warning light still on after inflating the tires?

The reasons why the tire pressure monitoring warning light is still on after inflating the tires are as follows: malfunction of the tire pressure monitoring system, damage to the tire pressure sensor, which requires computer diagnostics. Below is relevant information about tire pressure: 1. Precautions: It is important to regularly monitor tire pressure: The tire pressure of a car undergoes subtle changes as the driving mileage increases. If the tire pressure is too high, it reduces the contact area between the tire and the ground, leading to an increase in braking distance, which is not conducive to safe driving. If the tire pressure is too low, driving too fast or for too long can cause the sidewall of the tire to rupture or even lead to a blowout. 2. Adjusting tire pressure: As the weather becomes increasingly hot and driving speeds increase, the internal pressure of the tires will also continuously rise. Therefore, it is recommended to appropriately reduce the tire pressure in summer. Conversely, during autumn and winter, the tire pressure can be appropriately increased to reduce fuel consumption during driving.

5

Share

How to Identify Whether It's a Stock Car?

When purchasing a car, you can determine whether it's a new car or a stock car by checking the vehicle nameplate, tire wear, and manufacturing date. The vehicle nameplate is usually located below the B-pillar on the passenger side, mainly including the manufacturer's brand, model, engine power, total weight, manufacturing number, manufacturing date, and manufacturer name. Check the manufacturing month and year. If the manufacturing date is within three months of the purchase date, it is not a stock car. If it exceeds three months, it can basically be considered a stock car. Generally, new car tires show little to no wear, and the tire hairs on the sidewalls are clearly visible. If you notice the absence of tire hairs, pay attention and then check the tire's manufacturing date. There is a string of numbers on the tire sidewall, with the latter group representing the manufacturing year and the former group representing the week, allowing you to calculate the tire's manufacturing date. Then, compare it with the vehicle's manufacturing date on the nameplate. If the dates are close, it proves it's not a stock car. If there's a significant time difference, you need to be cautious.

13

1

Share

What does the 'a' symbol in the car mean?

a symbol is the automatic start-stop indicator. There is an automatic start-stop indicator light on the car's dashboard, as well as an automatic start-stop switch. Both the indicator light and the switch have the letter 'a'. Below is relevant information: 1. Meaning of the automatic start-stop indicator light: Many cars today are equipped with an automatic start-stop function, which can reduce exhaust emissions and save fuel. Cars with this feature have an indicator light on the dashboard. If the automatic start-stop system is functioning properly, the indicator light is usually green. If the system is not working correctly, the indicator light is typically yellow or red. 2. Automatic start-stop does not harm the car: Many car owners worry that the automatic start-stop function may damage the car, but there is no need for concern. The automatic start-stop function only activates when the engine coolant reaches normal operating temperature and the battery has sufficient charge. The primary purpose of the automatic start-stop system is not just to save fuel but to reduce exhaust emissions. With environmental concerns becoming increasingly prominent, major automakers are adopting various measures to lower vehicle emissions.

5

0

Share

Which Side to Place the Temporary Parking Number Plate?

The most suitable place for a temporary parking plate is behind the front windshield on the passenger side. Placing it here does not obstruct the driver's view or create blind spots. More details are as follows: To make the temporary parking plate easily visible, it should be placed in a highly noticeable location, which is undoubtedly the lower part of the car's front windshield. Additionally, it must be positioned without affecting driving visibility. Therefore, the optimal location is behind the front windshield on the passenger side. There are also temporary parking plates on the market designed to be placed outside the front windshield, but these are not recommended. While they may work fine for short-term use, prolonged exposure to sun and rain will significantly reduce the adhesive's effectiveness. A temporary parking plate consists of a stand (base), digits, and a brightness LED light. It is a display card made from various materials, designed to show the vehicle owner's contact information for others' convenience, thereby ensuring safe parking. According to Article 62 of the "Road Traffic Management Regulations," vehicles temporarily parked outside designated parking areas must adhere to the following rules: Park on the right side of the road in the direction of traffic. The driver must not leave the vehicle, and any vehicle obstructing traffic must move away promptly. Before the vehicle comes to a complete stop, doors must not be opened, and passengers must not enter or exit. Doors must not block other vehicles or pedestrians. Parking is prohibited in the following areas: opposite sidewalks with railings (or green barriers), crosswalks, construction zones (except for construction vehicles), and near obstacles. Parking is also prohibited at intersections, railway crossings, sharp curves, narrow roads, bridges, steep slopes, tunnels, and within 50 meters of these locations.

3

Share

Which Subject is Most Likely to Fail in the Driving Test Part 2?

In the driving test Part 2, reversing into a parking space is the most complex. Here are specific techniques for the driving test Part 2: 1. Slow speed: Keeping the speed slow is the fundamental rule for practicing in Part 2. Without stalling, try to keep the speed as slow as possible; the slower, the better, as it allows sufficient time to adjust each operation. 2. Adjust the rearview mirrors: After getting into the car, be sure to adjust the rearview mirrors properly, which is particularly important for reversing into a parking space and parallel parking. 3. Master the three-point alignment method: The three points are the driver's eyes, a reference point on the car, and a reference point on the ground. During the operations in Part 2, it's essential to locate the points accurately and observe carefully to ensure precision. 4. Pay attention to the four corners of the car: The front corner is prone to touching the outer line when reversing into a parking space, while the rear corner is prone to touching the side lines of the parking space; the front corner is prone to crossing the line during curve driving; the front corner is prone to crossing the line during a right-angle turn; the front corner is prone to touching the outer line or the left front corner of the parking space during parallel parking, while the right rear corner is prone to touching the right parking space line. Therefore, pay attention to the four corners and the outer lines.

5

1

Share

What are the symptoms of damaged engine mounts?

How to Use the Windshield Wipers in the Car?

Why is the tire pressure monitoring warning light still on after inflating the tires?

How to Identify Whether It's a Stock Car?

What does the 'a' symbol in the car mean?

Which Side to Place the Temporary Parking Number Plate?

Which Subject is Most Likely to Fail in the Driving Test Part 2?

How to Maintain a Pure Electric Vehicle?

Differences Between Parallel Import Car Dealers and 4S Stores

Is It Allowed to Drive in High Heels?

How to Check ETC Usage?