What are the symptoms of a faulty throttle pedal sensor?

1 Answers
McJayce
07/29/25 3:01pm
The symptoms of a faulty throttle pedal sensor include the inability to generate a throttle opening signal to the ECU, causing the ECU to only inject fuel based on the intake air volume at idle. Below is additional information: 1. Throttle Pedal: The throttle pedal, also known as the accelerator pedal, is part of the vehicle's fuel supply system. By controlling the amount of pedal depression, it regulates the throttle opening of the engine, controls the intake air volume, and the ECU adjusts the fuel injection accordingly to manage engine speed. The throttle pedal position sensor detects how much the pedal is depressed, and the ECU uses this signal to control the throttle motor to rotate to a specific angle, ensuring the required intake air volume for various operating conditions. 2. Throttle Pedal Operation Method: The throttle of a car engine is typically controlled by the pedal, also referred to as the accelerator pedal, which is the device for regulating fuel supply to the engine. When operating the throttle pedal, the right heel should rest on the floor of the driver's compartment as a pivot point, with the ball of the foot lightly pressing on the accelerator pedal. The ankle joint's flexion and extension movements are used to depress or release the pedal. When operating the throttle pedal, apply gentle force, ensuring smooth and gradual movements.
Was this review help?
12
3
Share
More Forum Discussions

What are the symptoms of a faulty steering gear in a truck?

Steering gear oil leakage, steering wheel stiffness, steering wheel not returning to center, abnormal noise when turning the steering wheel, steering wheel feeling loose, heavy steering wheel, etc. The specific cause needs to be determined by professional inspection for targeted repair. More relevant information is as follows: 1. The steering gear, commonly known as the steering box, is an important component for the steering function of a vehicle and a crucial guarantee for driving safety. 2. If the steering gear has issues, it must be repaired or replaced promptly. If not replaced for a long time, it can lead to excessive wear and clearance in the steering gear rack, causing abnormal noise when steering or driving, and in severe cases, making the steering heavier and losing power steering assistance.
4
5
Share

Is a Driver's License Required for Car Rental?

Renting a car requires a driver's license as well as an ID card. Without a driver's license, you cannot rent a car. During the rental period, the primary driver must hold the original driver's license that meets the driving qualifications and the corresponding auxiliary translation documents, and the original driver's license must be within the valid period. Below is additional information: 1. Most car rental companies require the driver to have held the license for at least one year, and for certain special vehicle models, the driver must have held the license for two or even three years or more. Please check the order terms for the selected vehicle group for details. 2. Some foreign car rental companies have age restrictions for drivers, such as those under 25 years old needing to pay a young driver risk fee. Specific regulations vary depending on the foreign car rental company.
14
2
Share

Why Are Used Maxus G10 Cars So Cheap?

Because the Maxus G10 is a niche model with low market presence and high maintenance and after-sales costs. Here is an introduction to the G10: 1. Vehicle Dimensions: The G10 is an MPV model under Maxus, with a wheelbase of 3198 mm, and its length, width, and height are 5168 mm, 980 mm, and 1928 mm respectively. 2. Powertrain: The Maxus G10 is equipped with two engines: a 1.9-liter turbocharged diesel engine and a 2.0-liter turbocharged gasoline engine. The 1.9-liter turbocharged diesel engine delivers 150 horsepower and 350 Nm of maximum torque, paired with either a 6-speed manual transmission or a 6-speed automatic transmission.
8
1
Share

What is the emission standard of Vios?

The emission standard of Vios depends on the specific model: 1. Models before 2018 comply with the China V emission standard; 2. Models after 2018 comply with the China VI emission standard. Taking the Vios 2021 Manual Forward Edition as an example, it is a compact 4-door 5-seater sedan with body dimensions of 4435mm in length, 1700mm in width, 1490mm in height, and a wheelbase of 2550mm. The Vios 2021 Manual Forward Edition is equipped with a 1.5L naturally aspirated engine and a 5-speed manual transmission, delivering a maximum power of 81 kW and a maximum torque of 138 Nm. It features front-wheel drive, with a front McPherson independent suspension and a rear torsion beam non-independent suspension.
3
4
Share

How to Repair Minor Scratches on White Car Paint?

There are three methods to repair minor scratches on white car paint: 1. Use a touch-up paint pen to directly apply paint to the scratched area. 2. Repair with stickers by covering the scratched area. 3. Use spray paint for repair—first apply a layer of primer, smooth it out, and then spray paint. Below is an introduction to car paint maintenance: 1. Apply a paint protection film (PPF) to maintain the paint's gloss and prevent scratches or corrosion from minor impacts. 2. Wash the car regularly and apply wax periodically. After about three years of vehicle use, consider polishing the paint to help preserve and protect it.
4
5
Share

How Long Can Car Headlight Polishing Last?

Car headlight polishing can last for two to three years. Here are some precautions for car headlight maintenance: 1. Replacement: Car headlights should maintain good sealing, especially to prevent contamination and damage to the reflector coating. When replacing bulbs and diffuser glass, avoid touching the mirror surface with fingers to prevent leaving sweat or oil marks that could cause the reflector to lose its luster and reduce reflective efficiency. 2. Regular Inspection: Regularly check and adjust the headlight beams to ensure the illumination distance meets requirements and that the bright light beams are consistent vertically. The diffuser glass should be correctly installed as specified to prevent loosening or displacement, maintaining the vertical alignment of the prisms.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.