What Are the Symptoms of a Faulty Oil Cooler?

2 Answers
Muhammad
07/28/25 10:19pm
Symptoms of a faulty oil cooler include signs of oil leakage at the oil cooler's location, the fan not rotating, and the presence of oil in the radiator. Below is a partial introduction regarding oil cooler damage: 1. Causes of Damage: The oil cooler, also known as the oil cooler, is prone to failures caused by not draining the cooling water inside the diesel engine body in winter. Common issues include copper pipe ruptures and cracks in the front and rear covers. 2. Inspection Methods: When damage occurs, a significant amount of oil will appear in the cooling water, and the oil level in the cooling water will rise rapidly. A damaged oil cooler needs to be replaced, and a damaged seal ring also requires replacement.
Was this review help?
3
0
Share
LeAdalynn
08/12/25 2:50am
A seasoned driver tells you, a faulty oil cooler is no small matter. The symptoms are quite obvious: the engine overheats frequently with warning alarms, oil temperature rises to ridiculous levels, the dashboard indicator stays lit, the car feels sluggish when driving, and acceleration is slow. In severe cases, oil may leak all over, making the engine bay wet with a burnt oil smell, and smoke may come out of the exhaust pipe. If not repaired promptly, the engine will wear out rapidly, significantly shortening its lifespan. I’ve experienced it myself—delaying the repair cost me a fortune in parts replacement. Regularly check oil temperature and signs of leakage, and ask the mechanic to inspect the cooler during maintenance to save a lot of trouble. Don’t push your luck while driving—if any warning signals appear, pull over safely and check immediately.
Was this review help?
3
3
Share
Expand All
More Forum Discussions

Are there traffic restrictions for new energy vehicles in Shanghai?

No restrictions. Below is a detailed introduction about vehicle traffic restrictions: 1. Introduction: Vehicle traffic restrictions, as the name suggests, are measures taken to alleviate traffic pressure or prevent air pollution by limiting the passage of certain vehicles. The even-odd license plate restriction was a policy implemented before the Beijing Olympics to ensure smooth traffic and meet air quality standards, which later became a long-term policy. One purpose is to reduce the traffic burden caused by the rapid increase of vehicles in Beijing, and another is to lower the emissions from motor vehicles in Beijing, keeping the air pollution index within a reasonable range. 2. Regulations: From October 5, 2020, to January 3, 2021, in Beijing, the license plate numbers restricted from Monday to Friday were: 4 and 9, 5 and 0, 1 and 6, 2 and 7, 3 and 8.
5
5
Share

Are New Energy Vehicles Automatic or Manual?

New energy vehicles are predominantly automatic transmission. Below is relevant information: 1. Structure of new energy vehicles: The structure of new energy vehicles differs from that of fuel-powered vehicles. Taking pure electric vehicles as an example, they rely on the 'three-electric' system (battery, motor, and electronic control) as the power source. Structurally, there is no transmission system like in traditional vehicles. According to the working principle of pure electric vehicles, the power is generated by the battery supplying electricity to the motor, which drives the vehicle's movement. 2. Drive motor of new energy vehicles: From the structural characteristics of the drive motor, the motor's speed range and torque output are controlled by the current magnitude during operation. It can adapt to all speed ranges under varying current and voltage conditions. This means that acceleration and deceleration are not achieved through a transmission for power conversion. Therefore, from this perspective, there is no need for manual physical intervention in the vehicle's transmission to achieve speed changes. As a result, pure electric new energy vehicles only come with automatic transmission models.
13
3
Share

Where is the chassis number stamping on the Mercedes-Benz C200?

Mercedes-Benz C200's chassis number is located on the nameplate at the front of the engine, near the driver's seat. The chassis number consists of 17 characters, including the vehicle manufacturer, brand, relevant characteristics, age, engine, chassis, driving form, etc. The vehicle's chassis number, also known as the vehicle identification number (VIN), is a unique set of codes. Here is some relevant information about the Vehicle Identification Number: VIN is a 17-character serial number composed of digits and letters. The first digit identifies the country/region of origin. If the car is assembled from parts produced in different countries/regions, this digit represents the assembly country/region. Some larger countries/regions are divided into multiple zones. The second digit identifies the vehicle manufacturer. The ninth digit is always a check digit. The correct check digit can be obtained by performing a series of calculations on the other digits in the VIN. Since each manufacturer uses different codes, and each vehicle produced in the same factory has its own production serial number, every vehicle produced in a specific year has a unique VIN.
5
4
Share

What is the diameter of a 12r22.5 tire?

12r22.5 tire diameter is 1085mm. The calculation method is: 12 inches + 22.5 multiplied by (middle number %), if there is no middle number, it is 80%. Here is more information about car tires: 1. According to China's national regulations, in addition to the tire specifications, both sides of the outer tire should also be marked with the manufacturer's trademark, ply rating, maximum load and corresponding air pressure, production number, etc. To facilitate the identification of the carcass cord, the sidewall is also marked with Pinyin letters. For example, M (or no letter) represents cotton cord tire, R represents rayon cord tire, N represents nylon tire, Z represents radial tire, G represents steel wire tire, ZG represents steel wire radial tire, etc. 2. The height of the wear mark on car tires is 1.6 mm. The height of the wear mark on load-bearing tires is 2.4 mm. When the height of the wear mark on the tire is less than 1.6 mm, it means the tire needs to be replaced.
5
4
Share

Where is the mechanical key of Changan Oshan X5?

The mechanical key is located inside the black part on the back of the Changan Oshan X5 key (the side with the car logo). Slide the black part downward to open it, and you will find the battery and the mechanical key. Below is an introduction to related content about Changan vehicles: 1. Exterior: The design adopts a stable and rugged style, which aligns with public aesthetics. The moderate design is easily accepted by the public. Changan Oshan caters to consumer preferences in product design and follows a cost-effective route in detail design. 2. Body dimensions: The length, width, and height are 4705mm, 1860mm, and 1720mm respectively, with a wheelbase of 2780mm. 3. Interior: The car is equipped with a 7-inch LCD instrument panel and a 10.25-inch central LCD screen, featuring the OnStyle2.0 intelligent connectivity system that integrates mainstream functions such as internet connectivity, navigation, and music, along with a 360-degree panoramic imaging system. 4. Powertrain: It is equipped with a 1.5TGDI engine, paired with a 6-speed manual or 7-speed dual-clutch transmission.
12
2
Share

Do New Cars Need Coolant Added?

Generally not required. Below are the relevant precautions for adding antifreeze: 1. Do not mix antifreeze: Different types of antifreeze have different freezing points due to their varying compositions, so it's essential to choose antifreeze based on the temperature conditions of the vehicle's operating environment. Typically, the antifreeze's freezing point should be 10~15°C lower than the local minimum temperature to prevent the antifreeze from losing its antifreeze function. 2. Do not dilute with water: Avoid mixing antifreeze with tap water. Antifreeze diluted with tap water not only increases the freezing point but also gradually forms sediment due to impurities in the tap water, ultimately affecting the cooling system's efficiency. 3. Do not directly add concentrated antifreeze: The concentration of ethylene glycol in antifreeze is not necessarily better when higher. Directly adding high-purity concentrated antifreeze not only fails to meet the engine cooling system's requirements for antifreeze but may also lead to unexpected issues such as antifreeze deterioration, increased low-temperature viscosity, and engine overheating. Therefore, when using concentrated antifreeze, it must be mixed according to the specified requirements, and direct use is prohibited.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.