What are the symptoms of a faulty front oxygen sensor in the Lavida?

What is the real fuel consumption of Changan CS75 PLUS 2.0T?

The comprehensive fuel consumption of Changan CS75 PLUS 2.0T is 8.1L/100km. There are currently 2 models of Changan CS75 PLUS 2.0T on sale: the Automatic Flagship model and the Automatic Navigation model, both with a comprehensive fuel consumption of 8.1L/100km. The above is the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The real fuel consumption is higher than this value, ranging from 9.7 to 12.0L/100km. When driving, the following 5 tips can help reduce fuel consumption: When starting the vehicle, start in a low gear, gently press the accelerator, and accelerate slowly. Do not suddenly press the accelerator hard, as this will multiply fuel consumption. Light acceleration, light braking, and early braking: When driving, press the accelerator lightly, try to avoid sudden increases in engine speed, and avoid shaking of the car during driving, making the car more fuel-efficient. By estimating road conditions and adopting slow and uniform acceleration or braking, fuel economy can be increased by up to 20%. Maintain proper tire pressure: Keep the tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (equivalent to about 0.2 in the metric system relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or inspection of the vehicle: Regular oil changes can reduce carbon deposits (carbon deposits can cause uneven ignition, weak acceleration, increased fuel consumption, and even cylinder misfires in severe cases); regularly check and replace the air filter if it is dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per the mileage. Close the windows when driving. Driving with windows open increases wind resistance. The greater the wind resistance, the greater the resistance the car faces, requiring more power and thus increasing fuel consumption.

7

5

Share

What Type of Engine Oil Should Be Used for Cars in Winter?

In winter, cars require engine oil with higher fluidity and wear resistance, and winter-grade oil can be used. Below is more information about winter engine oil for cars: 1. The impact of low temperatures on engine oil: Low temperatures affect fluidity. In winter, when temperatures are low, engine oil becomes more viscous, turning into a semi-solid, semi-fluid state, which hinders smooth flow. Substandard engine oil can exacerbate engine wear. If the oil quality is slightly inferior, it may even stop flowing entirely. In such cases, the oil would take a long time to reach the engine. 2. Information about winter engine oil: There are six types of winter-grade oils. The winter-grade oil classifications are 0W, 5W, 10W, 15W, 20W, and 25W. The symbol 'W' stands for winter, and the smaller the number before 'W', the lower the oil's viscosity at low temperatures, the better its low-temperature fluidity, and the lower the minimum applicable temperature. For example, 5W can withstand external temperatures as low as -30°C, 10W up to -25°C, 15W up to -20°C, and 20W up to -15°C.

11

4

Share

How Heavy is a Sedan?

Generally, the weight of an ordinary sedan ranges from 100 to 200 kg. Depending on the brand, model, vehicle configuration, and engine type, there can be significant variations. Sedan engines are made from materials such as cast aluminum, cast steel, and cast iron, with cylinder blocks and cylinder heads potentially using the same or different materials. The design displacement, number of cylinders, and consequently the weight of the engine also vary based on the vehicle classification. Korean Models: Sonata 2.0 (1444 kg), NF Sonata 2.4 (1463 kg), Optima 2.0 (1480 kg). American Models: Regal 2.5 (1557 kg), Epica 2.0 (1482 kg), Mondeo 2.0 (1445 kg), Focus 2.0 (1340 kg). German Models: BMW 3 Series (1395 kg), BMW 5 Series (1570 kg), Passat 1.8T (1450 kg), Passat Lingyu 1.8T (1522 kg).

20

3

Share

How often should Castrol Edge 5W30 be changed?

Castrol Edge 5W30 is a fully synthetic engine oil that can be changed every 10,000 kilometers or once a year. Its characteristic is slow degradation, so the replacement cycle is relatively long. Steps for changing engine oil: When the car engine temperature is normal, lift the vehicle with a jack. Place a container under the oil pan at the bottom of the car chassis, then loosen the drain plug to allow the oil to flow out naturally. Once the oil has completely drained, reinstall the drain plug. Move the oil container under the oil filter, remove the filter with a wrench, and let the oil inside flow out naturally. After the oil has drained completely, install a new filter. After installing the new filter, place the car on level ground and add new oil. It is best to use the manufacturer-recommended oil that meets the standards. After adding the new oil, start the vehicle to check the oil condition. If any faults appear, perform timely maintenance. Performance characteristics of Castrol Edge: Extends the life of today's high-performance engines, with strong high-temperature control capabilities and excellent performance. Castrol Edge is specially developed to enhance the oil's oxidation stability and reduce oil degradation under high temperatures, making it more suitable for the demanding operating environments of modern high-performance engines.

14

2

Share

What is the fuel consumption per 100 kilometers for the Changan Yuexiang?

The Changan Yuexiang currently has 6 models on sale. Among them, the 2019 1.5L-DCT Premium Type VI, Luxury Type VI, and Comfort Type VI models equipped with a 107 horsepower engine have an NEDC fuel consumption of 6.2L per 100 kilometers. The 2019 1.4L manual Premium Type VI, Comfort Type VI Luxury Edition, and Luxury Type VI models equipped with a 101 horsepower engine have an NEDC fuel consumption of 5.4L per 100 kilometers. The fuel tank capacity of Changan Yuexiang models is the same. The distance that can be covered with a full tank of fuel is as follows: For models equipped with a 107 horsepower engine, the fuel tank capacity is 40L, and the distance that can be covered with a full tank is 40/6.2*100=645KM. For models equipped with a 101 horsepower engine, the fuel tank capacity is 40L, and the distance that can be covered with a full tank is 40/5.4*100=741KM. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline to burn for work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine computer controls the engine to run at higher RPMs to warm up, which also increases fuel consumption.

2

4

Share

What kind of water is used for car window tinting?

When applying car window tint film, a specialized film cleaning solution and installation fluid diluted with purified water is sprayed to achieve maximum bonding strength between the film and glass. However, regular tap water or diluted dish soap can also be used as long as it's not adhesive. Purpose of spraying water during car window tinting: Prevent bubbles - The water allows time to squeegee out air bubbles before the film fully adheres. Adjust positioning - The water enables repositioning of the film to prevent misalignment. Functions of car window tinting: Heat insulation - Tint film effectively blocks infrared radiation that generates substantial heat. UV protection - Medium and long wave ultraviolet rays can penetrate thick glass, while tint film blocks most UV rays, preventing skin damage and reducing interior fading. Safety and shatter resistance - The polyester film base provides exceptional tear resistance and penetration protection. Combined with the adhesive layer, it strengthens glass to prevent injury from accidental breakage. Privacy - Properly selected tint film maintains outward visibility while obscuring the interior view from outside. Improved AC efficiency - Tint film compensates for cooling loss by reducing interior temperature quickly, leading to fuel savings. Enhanced aesthetics - Custom tinting allows personalization of vehicle appearance. Glare reduction - Minimizes hazardous glare-related driving conditions.

2

1

Share

What are the symptoms of a faulty front oxygen sensor in the Lavida?

What is the real fuel consumption of Changan CS75 PLUS 2.0T?

What Type of Engine Oil Should Be Used for Cars in Winter?

How Heavy is a Sedan?

How often should Castrol Edge 5W30 be changed?

What is the fuel consumption per 100 kilometers for the Changan Yuexiang?

What kind of water is used for car window tinting?

Why is the wiper not working?

What procedures are required for transferring vehicle registration from another location to local licensing?

Can a Financed Car Be Transferred?

What type of gasoline should a Mercedes-Benz C-Class use?