What are the symptoms of a faulty exhaust valve in the BYD F3?

1 Answers
ClaraAnn
07/29/25 9:08pm
The symptoms of a faulty exhaust valve in the BYD F3 include: the exhaust valve not sealing properly, abnormal exhaust gas recirculation, and the malfunction indicator light flashing. The exhaust valve, also known as the oil separator, is installed between the compressor outlet and the condenser inlet. It improves the efficiency of the condenser and evaporator by separating gases, making it particularly important. If issues arise, prompt repair or replacement is necessary. If the exhaust gas recirculation valve does not seal tightly, some exhaust gas will enter the intake manifold during engine idling, reducing the mixture of gases in the engine. The exhaust gas entering the manifold will mix with the air-fuel mixture, diluting the concentration of the mixture in the engine, which can affect the engine's idle performance. This may result in unstable idling or engine shaking, and in severe cases, may cause the engine to stall. The dimensions of the BYD F3 are 4533mm in length, 1705mm in width, and 1490mm in height.
Was this review help?
5
4
Share
More Forum Discussions

Will I get points deducted for speeding 20% but less than 30%?

Exceeding the speed limit by more than 20% but less than 30% will result in 3 points deducted and a fine. Here is extended information about violation handling: 1. Time frame: Vehicle owners must go to the local traffic police station to handle the violation within 15 days of receiving the penalty SMS. If not handled within 15 days, a late fee of 3% per day will be charged, but the late fee amount will not exceed double the original fine amount. Early handling avoids unnecessary penalties. 2. Confirmation method: The fastest and most effective way to know if you have violated traffic rules is to inquire at the vehicle management office or traffic police station. You need to bring important documents such as your driver's license, vehicle license, and ID card. All three are indispensable. Of course, it's best to prepare some cash so that even if you find a violation record, you can immediately complete the relevant procedures.
9
3
Share

How often does the driver's license points reset?

The period from the initial license issuance date to the corresponding date of the following year constitutes one demerit point cycle, and so on with each year being one cycle; if the accumulated demerit points within a cycle do not reach 12, the existing points will automatically reset to zero at the start of the next cycle, effectively restoring the 12-point limit. Additional information: When the vehicle management office renews a motor vehicle driver's license, it must conduct an examination of the license. The following circumstances will result in the refusal to renew a motor vehicle driver's license: 1. Unresolved road traffic safety violations; 2. Physical conditions not meeting the driving license requirements; 3. Accumulating 12 demerit points within one cycle without completing the required road traffic safety laws, regulations, and related knowledge education and examination.
12
2
Share

What are the functions of a car?

The main functions of a car are transportation, carrying passengers, and goods delivery. Below are the relevant introductions for vehicle pickup precautions: 1. Inspect the vehicle condition: Park the car in an outdoor area with sufficient lighting, observe the body paint to ensure there are no scratches or abrasions, check if the paint is uniform and appears translucent under sunlight reflection. Open the car door—the vehicle identification plate is located near the driver's side door or B-pillar—and review the relevant information on the plate. Open the engine compartment to check if it is clean, free of dirt or dust accumulation, and verify that engine oil and other fluids are at adequate levels. Manually test whether the doors open and close smoothly, if the windows roll up and down normally, if there is any strong odor inside the cabin, if the air conditioning cools properly, if the windshield wipers function correctly, and if all lights illuminate normally. 2. Test drive: Start the engine to assess whether the idle speed is stable, if there is noticeable noise inside the cabin, and if the steering wheel vibrates significantly. 3. Verify documents: Ensure all relevant vehicle materials are complete, such as the purchase invoice, certificate of conformity, vehicle conformity certificate, motor vehicle registration certificate, warranty certificate, vehicle user manual, and new car delivery confirmation form.
13
1
Share

What is the reason for an Audi stalling and restarting without cause?

Specific reasons are introduced as follows: 1. The spark plug loses its ignition capability. 2. Throttle failure. 3. Carbon deposits: Carbon deposits can cause incomplete combustion of gasoline, leading to engine shaking issues. Additional information: 1. The specific effects of engine carbon deposits on a car are as follows: (1) Reduced engine power, meaning uneven and gradually decreasing power output, in other words, the car becomes less powerful over time. (2) Increased fuel consumption, adding to the economic burden. (3) Difficulty in cold starts, meaning the car is hard to start. (4) Severe carbon deposits in the combustion chamber can also cause cylinder knocking, noise during low-speed acceleration, damage to the piston and crankshaft, and high engine temperatures, severely affecting car safety. (5) Exceeding emission standards, not only failing annual inspections but also directly increasing environmental pollution hazards.
11
5
Share

What is trophy?

The 'trophy' in MG6 refers to the Blue Core engine technology. 1. Engine: The MG6 Trophy Manual Performance Edition is equipped with SAIC's world-class Blue Core high-efficiency 1.5T turbocharged engine, delivering a maximum power output of approximately 190 horsepower. It comes paired with an SCM250 6-speed manual transmission, featuring MacPherson independent front suspension and multi-link independent rear suspension with professional tuning. 2. Internet Intelligent System: The MG6 20T Automatic Trophy Super Sport Internet Edition also features the latest generation of the Internet Intelligent System, including: precise response to driver and passenger commands, intelligent recognition of contextual instructions, big data navigation, smart payment, remote vehicle control, self-driving services, lifestyle recommendations, and more, achieving cross-segment capabilities. 3. Extended Ecosystem: The new MG6 20T Automatic Trophy Super Sport Internet Edition offers a rich extended ecosystem, compatible with Philips in-car air purifiers, Zero UAV drones, Xiaoyi 4K HD action cameras, Dingdingpai dash cams, and other smart external devices, creating a more intelligent and enjoyable driving experience.
7
1
Share

What causes the wiper to not clean the car glass properly in the rain?

The reasons why the wiper does not clean the car glass properly are as follows: 1. Wiper angle: The angle of the wiper may cause it to not clean properly, and it can be resolved by adjusting it. If the downward pressure of the wiper is too strong, it may lead to uneven force distribution, in which case the distance between the springs needs to be loosened. 2. Foreign objects on the wiper: If you hear a "squeaking" noise when the wiper is operating, it is likely due to foreign objects trapped between the wiper blade and the windshield, which can also prevent the wiper from cleaning properly. In this case, check for any foreign objects and remove them if present. Alternatively, the wiper blade may be too rough, and smoothing it with sandpaper can help. 3. Wiper hardening: Everything has its lifespan, especially for vehicles frequently parked outdoors, which are inevitably exposed to sun and rain. Over time, this will accelerate the aging of the wiper rubber, reducing its effectiveness. In such cases, it is necessary to replace the wiper as soon as possible.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.