What are the symptoms of a faulty carbon canister in the Wuling Zhiguang?

1 Answers
CassidyDella
07/25/25 8:01am
Symptoms of a damaged carbon canister in the Wuling Zhiguang: When the engine is running at non-idle speed, you may occasionally hear a "clicking" sound; when accelerating by pressing the throttle, the car may jerk, and there may be a strong gasoline smell inside the car. The car's carbon canister is an important component of the gasoline evaporation control system, connecting the car's fuel tank and engine. The following is a brief introduction to the carbon canister: 1. The carbon canister is part of the Evaporative Emission Control System (EVAP), which was introduced to prevent fuel vapor from escaping into the atmosphere after the engine stops running. Since 1995, China has mandated that all newly manufactured cars must be equipped with this system. 2. The working principle is that after the engine is turned off, gasoline vapor mixes with fresh air in the canister and is stored in the activated carbon canister; when the engine is started, the solenoid valve installed between the activated carbon canister and the intake manifold opens, and the gasoline vapor in the activated carbon canister is drawn into the cylinder by the vacuum in the intake pipe along with clean air to participate in combustion.
Was this review help?
20
1
Share
More Forum Discussions

How Long Can a Car Drive Continuously?

A car can drive continuously for 500-800 kilometers as long as there is fuel in the tank. Generally, engines undergo a 500-hour non-stop test. However, the driving range may vary depending on the vehicle. Precautions for long-distance driving: Check the engine oil, transmission fluid, clutch fluid, power steering fluid, brake fluid, coolant, and windshield washer fluid, and top up or replace them if necessary. Inspect for leaks in oil pipes, water pipes, and seals, and check rubber hoses for aging, cracking, or wear. Examine all component connections for looseness and repair or replace as needed. Check the battery display window for voltage status, ensure the battery is securely fastened, and inspect terminals for looseness or corrosion. Charge, tighten, or rinse the positive and negative terminals with hot water as required. Monitor all warning and indicator lights on the dashboard, as well as all vehicle lights, and address any malfunctions accordingly. Inspect tire tread wear, check for foreign objects in the tread, examine the tire surface and sidewalls for damage, and ensure all tire pressures are normal. Perform preventive replacement or maintenance as needed.
12
0
Share

What is the actual fuel consumption of the Roewe RX5?

The Roewe RX5 has a fuel consumption of 6.8~8.1L/100km. The following is a related introduction to the Roewe RX5: 1. Exterior: In terms of exterior design, the Roewe RX5 adopts the 'Rhythm Design' language, equipped with a matrix LED headlight assembly consisting of 24 LED light sources. The body lines are stylish and dynamic, featuring a dual-waistline design on the side profile, and the roof is equipped with a luggage rack. The overall body lines are rhythmic and full of tension. 2. Interior: The interior of the Roewe RX5 also follows the 'Rhythm Design' concept. The overall interior design is simple and stylish, with the center console panel wrapped in leather. It features a red and black dual-color scheme, and a deep black interior option is also available. The Roewe RX5 interior is further enhanced with aluminum trim strips that run through the entire cockpit. The highlight of the interior is the vertically oriented 10.4-inch full HD capacitive touchscreen, which is tilted towards the driver for safer and more convenient operation. 3. Powertrain: This new Roewe SUV is built on the all-new SSA platform. In terms of powertrain, the initial models are equipped with SAIC's 'Blue Core' conventional powertrain system, offering a choice between 1.5T and 2.0T engines.
17
1
Share

What is the mantra for short individuals in Subject 2?

Here is the mantra for short individuals in Subject 2: 1. Adjust the seat after getting in the car, ensuring the height and position are suitable: Adjust the rearview mirror to clearly see the ground behind the wheels; fasten the seatbelt and listen carefully to instructions and commands; identify the garage number and locate the side line at 1.5 meters; stop at the sensor line and ensure the garage direction is correct. 2. First find the garage when parking, and don’t confuse the left and right directions; look at the reverse mirror when shifting to reverse gear, and don’t stop the car after crossing the line twice; check the car body in the reverse mirror, and quickly turn the wheel back when the garage entrance is more than half passed; look back at the garage corner, and steer toward the wider side; check if the car is straight, ensuring both side lines are parallel. 3. Straighten the wheel after parallel parking, and make sure the number of steering wheel turns is correct; stop the car when it’s straight and the reverse mirror crosses the line; pause in the garage for three seconds, and carefully consider left and right when exiting; maintain a distance of 30 cm for parallel parking, which is most suitable.
11
0
Share

What are the purchase conditions for the Ferrari LaFerrari?

Must have a net worth of over 50 million, no record of reselling Ferraris, and have purchased 5 Ferraris. Here is some extended information about the Ferrari LaFerrari: 1. History: The LaFerrari is a flagship supercar launched by Ferrari, known as one of the three hypercars. The English name for LaFerrari is LaFerrari. The LaFerrari first debuted at the Geneva Motor Show in March 2013. The LaFerrari is the successor to the Enzo. The LaFerrari is a limited-edition model, with only 499 units produced. There is only one model of the LaFerrari – the 2014 6.3L standard. 2. Vehicle Features: The LaFerrari is positioned as a grand tourer. In terms of dimensions, it measures 4702x1992x1116mm (length x width x height), with a wheelbase of 2650mm. The LaFerrari is a hybrid electric vehicle. It combines a 6.3-liter V12 naturally aspirated engine with an electric motor. The engine delivers a maximum power of 588KW and a maximum torque of 700N・m, with direct fuel injection and rear-wheel drive.
10
0
Share

Is the Binrui Fuel-Efficient?

Binrui is fuel-efficient. Here is some relevant information about the Binrui: 1. Simple and stylish interior: The silver chrome-plated center console is exquisite and delicate; the 10.25-inch oversized display screen is full of technological appeal; the leather-wrapped multifunctional flat-bottom steering wheel offers an excellent grip. Additionally, its seats are not only soft and comfortable but also feature natural tea fragrance and heating functions. 2. Safety: It boasts an L2-level intelligent driving technology, which is typically exclusive to luxury cars, and the Binrui 200T surpasses its peers in terms of configuration. The Binrui 200T also provides multiple safety features for secure driving, including the ACC adaptive cruise control system, ICC intelligent navigation system, LKA lane-keeping assist system, AEB-P city pre-collision safety system, and IHBC intelligent high-beam control system. These features not only enhance the driving experience but also offer all-weather, all-road condition safety protection for the owner. 3. Low fuel consumption: The G-power200T mid-mounted direct-injection turbocharged engine in the Binrui 200T has been meticulously designed. This engine incorporates technologies such as high-pressure direct injection, dual variable valve timing, integrated exhaust manifold in the cylinder head, and an all-aluminum cylinder block, enabling the Binrui 200T to achieve top-tier fuel atomization efficiency, with a fuel consumption of only 5L per 100 kilometers.
13
5
Share

Is it necessary to change the engine oil within a year?

It is not mandatory to change the engine oil if it has been over a year, and you can still drive temporarily. However, it is necessary to promptly visit a qualified maintenance facility to replace the engine oil and oil filter to prevent the decline in the lubrication, cooling, sealing, and cleaning functions of the oil, which could cause engine damage. Below are specific details about the functions of engine oil: 1. Lubrication: Dry friction between metal surfaces can cause damage to the metal parts, so the lubricating effect of engine oil is needed for protection. With the lubrication of engine oil, metal parts do not come into direct contact but float on the lubricating oil. This is commonly referred to as the 'oil film bearing' effect. 2. Cleaning: After prolonged operation, the engine may inevitably shed metal burrs due to friction. If these burrs fall off, they could threaten other metal surfaces. Therefore, the flushing action of the engine oil is necessary to 'carry away' these metal burrs. 3. Cooling: The interior of the engine operates at high temperatures, with the cylinders relying on the cooling system for cooling. However, certain internal components cannot rely on the cooling system and instead depend on the circulation of engine oil to dissipate heat. 4. Rust prevention: Additionally, engine oil isolates metal surfaces from the air, ensuring that the internal metals of the engine do not oxidize or rust.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.