What Are the Symptoms of a Faulty Car Transmission?

Is the Subaru BRZ Considered a Sports Car?

Subaru BRZ is a sports car. According to Subaru's official introduction, the Subaru BRZ is a 2-door, 4-seater hardtop sports car. Based on the comprehensive fuel consumption data from the Ministry of Industry and Information Technology, the manual transmission version of the Subaru BRZ has a combined fuel consumption of 8.2 liters per 100 kilometers, while the automatic transmission version has a combined fuel consumption of 7.5 liters per 100 kilometers. Below are the details of the Subaru BRZ: 1. In terms of power, the Subaru BRZ is equipped with a 2.0-liter four-cylinder naturally aspirated engine, delivering a maximum horsepower of 200 HP, a maximum power of 147 kW, and a maximum torque of 205 N·m. 2. For transmission, the Subaru BRZ offers a choice between a 6-speed manual and a 6-speed automatic transmission. 3. In terms of suspension, the Subaru BRZ features a MacPherson strut independent front suspension and a double-wishbone independent rear suspension. 4. Regarding the drivetrain, the Subaru BRZ uses a front-engine, rear-wheel-drive system across all models.

14

1

Share

How to Replace the Battery in an Older Mercedes-Benz S350L Key?

Steps to replace the battery in an older Mercedes-Benz S350L key are as follows: 1. Before replacing, it's best to first understand the battery model for the car key, then select a new key battery according to the specified model. 2. Push the marked switch upwards from the tail of the key, and the hidden mechanical key will pop out slightly, allowing you to remove the mechanical key. 3. Still at the tail of the key, use the just-removed mechanical key to press against the marked position, and with a slight force, the key casing can be opened. 4. After removing the key casing, you can see the battery positioned relatively deep inside. Insert an object into the gaps on both sides and gently pry to remove the old battery. 5. Install the new battery, ensuring the positive and negative terminals are not reversed. Then, follow the installation steps: first insert the top of the casing, then press firmly on the other end to complete the battery replacement. Finally, don't forget to reinsert the mechanical key.

5

Share

What are the methods for judging front, rear, left, and right distances while driving?

When driving, it's necessary to know the vehicle's position on the road, how far the body is from the boundary line, and the distance from the center line. Here are methods for judging distances: 1. Judging the left wheel position: To judge the left wheel position, you need to know where the left wheel will pass over to avoid the tire pressing on solid lines or evading potholes and stones on the road. 2. Judging the right wheel position: When judging the right wheel position, when the line of sight passes through the right wiper and intersects with the target, the tire will pass over that target. 3. Center line: Driving 60 cm from the center line is safer during normal driving. When the line of sight aligns with the intersection of the panel and the A-pillar and coincides with the center line, the body is exactly about 60 cm from the center line. 4. Pulling over to the side: When pulling over to the right side, when the node of the right wiper aligns with the roadside, slightly pulling the steering wheel to the left can achieve the effect of parking 10 cm from the roadside.

16

5

Share

Is it necessary to apply paint protection film?

For some high-end cars, it is still necessary to apply. Here is the relevant information: 1. Paint protection film has excellent durability: The main areas to apply paint protection film include the front and rear bumpers, the front edge of the engine hood, the front edge of the wheel rims, the outer edges of the rearview mirrors, the edges of the doors, the inner edges of the door handles, the keyholes, the trunk, and the side door steps. It protects the paint surface from minor scratches and chipping. 2. Invisible car wrap: It has strong wear resistance, scratch resistance, flexibility, and prevents malicious scratches, providing comprehensive protection for the car paint. Because the car paint film is very tough, it is also vividly called "rhino skin." It can protect the paint surfaces of various parts of the car body from peeling and scratching, avoiding rust, aging, and yellowing of the paint surface. A piece of "rhino skin" also has the ability to prevent stone chips and resist UV radiation. Due to its outstanding data extensibility, transparency, and surface adaptability, it will never affect the appearance of the car body after application. It is now being used by more and more car manufacturers.

10

0

Share

Does Rim Edge Wear Have Any Impact?

Whether rim edge wear has an impact depends on the extent of the wear. If the situation is severe, it needs to be repaired at a maintenance shop. If the rim is only slightly scratched, wheel balancing may not be necessary. However, if the rim is damaged to the point of requiring replacement, a wheel balance test will be needed. Wheel balancing is performed to ensure that the car tires remain relatively stable during high-speed rotation, maintaining normal vehicle operation. This process is carried out on a specific balancing machine, where balance weights are attached to the inner side of the tire to achieve stability. The balance weights are measured in grams (g), with common sizes including 5g, 10g, 15g, 20g, and up to around 50g. Rim edge scratches can be categorized into the following three situations: If the edge of the rim is severely scratched, it needs to be repaired. Otherwise, the rim may not fit tightly with the tire, leading to air leakage. If the rim is scratched to the point where the primer is exposed, it also requires repair. If left unattended for a long time, the scratched area may wrinkle and expand, eventually leading to rust and corrosion. If the rim is damaged to the point of deformation, this is considered a severe situation that affects the vehicle's operation. Immediate repair or even replacement is necessary.

4

Share

What does 'max' mean in cars?

Usually, 'MAX' stands for 'maximum'. When you turn on the A/C cooling switch and then press MAX, the air conditioning system will activate the strongest cooling mode with the blower output at its maximum. Therefore, the MAX button on a car's air conditioning indicates the strongest cooling function, which helps to lower the cabin temperature as quickly as possible. More details about 'max' are as follows: 1. Introduction one: The term 'max' can be seen not only on air conditioning control buttons but also on various fluid reservoirs in the engine compartment. Here, 'max' also carries the meaning of 'maximum' or 'highest', sometimes simply denoted by 'M'. 2. Introduction two: The 'max' marking on fluid reservoirs indicates the upper limit of the fluid level. The fluid level should not exceed the horizontal line corresponding to 'max'. Naturally, where there is an upper limit, there is also a lower limit. 3. Introduction three: The lowest fluid level marking indicates that the fluid should not go below the horizontal line corresponding to 'low'. This is most evident in the overflow tank (i.e., the radiator). The optimal fluid level is between the upper and lower limits.

18

2

Share

What Are the Symptoms of a Faulty Car Transmission?

Is the Subaru BRZ Considered a Sports Car?

How to Replace the Battery in an Older Mercedes-Benz S350L Key?

What are the methods for judging front, rear, left, and right distances while driving?

Is it necessary to apply paint protection film?

Does Rim Edge Wear Have Any Impact?

What does 'max' mean in cars?

Is Wuling Hongguang Considered a Joint Venture Car?

What Are the Test Items for Automatic Transmission?

How high is considered over-height for a 9.6-meter vehicle?

What is the reason for the lack of acceleration after adding fuel additive?