···
Log in / Register

What are the symptoms of a faulty car catalytic converter?

4 Answers
KylieMarie
08/29/25 6:20am
The main manifestations of a failed catalytic converter are: 1. Unpleasant exhaust odor. 2. Engine overheating, possibly leading to premature excessive wear. 3. Lack of engine power, sometimes accompanied by abnormal noises such as backfiring. 4. Increased fuel consumption, with some vehicles experiencing a significant rise in fuel usage. Precautions for using a car catalytic converter: 1. Do not use leaded gasoline. 2. Avoid prolonged idling (open-loop control state). 3. Avoid sudden changes in engine speed. 4. Do not set the ignition timing too late. 5. Avoid prolonged unsuccessful engine starts. 6. Do not test for spark by pulling the high-voltage wire for extended periods. 7. When measuring cylinder compression, disconnect the central control connector of the fuel pump to stop the injectors from spraying fuel into the cylinders. 8. If a cylinder is found to be malfunctioning, stop the vehicle promptly to inspect and rectify the issue. 9. Avoid factors that cause an overly rich air-fuel mixture, such as leaking fuel injectors, a failed fuel pressure regulator (excessive fuel pressure), failed oxygen sensor, or failed mass air flow sensor. 10. Generally, a catalytic converter requires no maintenance if used correctly, so avoid unnecessary disassembly. If replacement is needed, ensure it matches the engine specifications.
Was this review help?
16
3
Share
JackAnn
09/11/25 3:57am
Recently when driving my old SUV, I noticed the acceleration was particularly sluggish - pressing the gas pedal felt like there was no power, making the whole driving experience terrible. When I took it for repairs, the Check Engine light was constantly on, and there was a foul smell from the exhaust pipe, somewhat like the sulfurous odor of rotten eggs. Fuel consumption had also increased by nearly 20% compared to normal, especially noticeable on highways. The mechanic said the catalytic converter was clogged, and over time this could cause engine overheating or more serious failures, recommending early replacement. As someone who frequently takes road trips, this reminded me to pay more attention to exhaust system maintenance - after all, driving safety comes first, and we shouldn't wait until major failures occur to regret it.
Was this review help?
8
1
Share
Expand All
StGavin
10/25/25 4:45am
My little car has been acting up lately, and I always feel uneasy when the yellow warning light on the dashboard comes on. The car shakes violently when accelerating, and sometimes it's even hard to start. My friend said the exhaust smells terrible. The auto repair shop diagnosed it as a bad catalytic converter, probably clogged from years of carbon buildup. The exhaust color looks normal, but the smell is pungent, and fuel consumption has increased significantly, costing me dozens more in gas money each month. Thinking about how this issue disrupts travel and could easily lead to traffic tickets, I realize I need to schedule regular check-ups in the future.
Was this review help?
12
3
Share
Expand All
LaFaith
12/08/25 5:09am
I always pay attention to the environmental performance of cars. A faulty three-way catalytic converter can cause excessive exhaust emissions, with harmful gases such as nitrogen oxides increasing sharply. I have observed that after starting the car, there is a lack of power during acceleration, and sometimes the exhaust pipe gets extremely hot with a particularly strong odor. This not only pollutes the environment but also accelerates the wear of other components and increases fuel consumption, wasting resources. I recommend that everyone quickly check and repair the car report if they encounter similar situations.
Was this review help?
9
3
Share
Expand All
More Forum Discussions

Has the 2021 Tayron Model Resolved the Particulate Matter Issue?

Partially resolved. The 2021 Tharu 33 Luxury Plus model has not addressed this issue. Below is relevant information: How the particulate filter works: Its basic operating principle is as follows: For instance, a diesel particulate filter coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the engine's exhaust particulate trap through a dedicated pipe. It then passes through a densely arranged bag-type filter inside, which adsorbs the carbon particles onto a filter made of metal fiber felt. Function of the particulate filter: The diesel particulate filter effectively reduces the emission of particulate matter. It first captures the particulate matter in the exhaust gas and then oxidizes the captured particles to regenerate the filter. The so-called filter regeneration refers to the fact that during long-term operation of the DPF, the accumulation of particles inside the trap gradually increases, leading to higher back pressure in the engine and a decline in engine performance. Therefore, it is necessary to periodically remove the deposited particles to restore the DPF's filtering performance.
5
4
Share

What are the differences between the Corolla Elite Edition and Luxury Edition?

The differences between the Corolla Elite Edition and Luxury Edition: 1. Different engines: The Corolla Elite Edition is equipped with a 1.8L naturally aspirated engine; the Luxury Edition is equipped with a 1.2T turbocharged engine. 2. Different fuel types: The Corolla Elite Edition adopts a hybrid power system; the Luxury Edition uses gasoline power. 3. Different transmission types: The Corolla Elite Edition features an eCVT electronic continuously variable transmission; the Luxury Edition uses a CVT continuously variable transmission. Corolla is a brand under Toyota Motor Corporation. The front design adopts a trapezoidal structure, with the Toyota emblem at the center, and the front grille and headlights extending to both sides and slightly rising, fully embodying Toyota's Keen Look family design style, which is highly impactful and sharp. The car combines new projection headlights with LED daytime running lights, giving the front face a more avant-garde technological feel. The body dimensions are 4630mm in length, 1775mm in width, and 1480mm in height.
20
3
Share

What are the differences between dynamic balance and static balance?

Dynamic balance and static balance differ as follows: 1. Different in nature: Static balance is corrected on a single correction plane of the rotor, with the remaining unbalance after correction ensuring that the rotor remains within the allowable unbalance range when static, hence it is also known as single-plane balance. Dynamic balance is corrected simultaneously on two correction planes of the rotor, with the remaining unbalance after correction ensuring that the rotor remains within the allowable unbalance range during operation, hence it is also known as two-plane balance. 2. Different focus: In static balance, the center of gravity of the wheel aligns with the axis of rotation, allowing it to stop at any position. If a wheel consistently stops at the same position each time, it indicates static imbalance. Dynamic balance is a phenomenon observed during the rotation of the wheel. Due to the asymmetry of mass relative to the wheel's symmetrical plane, when the wheel rotates at high speed, it swings from side to side, which is the phenomenon of dynamic imbalance.
20
4
Share

What are the penalties for being fully at fault in a rear-end collision? Will points be deducted?

Generally, no points will be deducted. Relevant regulations: A rear-end collision where one is fully at fault is considered a traffic accident. According to the Road Traffic Safety Law, compensation must be provided to the other party involved. Additionally, under relevant laws and regulations, after a traffic accident occurs, the traffic management department of the public security authority will no longer impose penalties for traffic violations. Precautions for rear-end collisions: Protect the scene: In the event of a rear-end collision on the road, the driver should immediately stop the vehicle and protect the scene; Negotiate or report to the police: If a rear-end collision on the road does not result in personal injury, the parties involved may negotiate compensation matters on their own; If personal injury occurs, the driver should immediately rescue the injured and promptly report to the traffic police on duty or the traffic management department of the public security authority.
4
3
Share

Can the driver be clearly seen in the photo of running a red light?

Running a red light photo cannot clearly show the driver. The electronic eye uses induction lines to sense the pressure from vehicles on the road, collects the signals through sensors to the central processor, and starts or shuts down the electronic photo system within the traffic light cycle. The working principle of the electronic eye capturing red light running: within the same time interval (red light cycle), if two pulse signals are generated simultaneously, it is considered "valid". If the red light is on, the front wheels cross the line, but the rear wheels do not, only one pulse is generated. When there are no two consecutive pulses, no photo is taken. At the same time, at least three pictures of the violating vehicle are taken: one is an instant violation picture, one is a license plate recognition picture, and one is a panoramic picture (all three pictures are taken instantly). The criteria for determining red light running: if the vehicle just crosses the stop line when the light is red but stops immediately, this kind of red light running will not be penalized. However, if there is obvious movement after crossing the line, it will be penalized.
5
5
Share

What is the cylinder numbering arrangement for BMW?

BMW cylinder numbering arrangement: Starting from the front of the car on the left side are cylinders 1234, and on the right side are 5678. That is, the side with the oil filler cap is cylinders 1234, and the other end is 5678. Definition of cylinder count: Cylinder count refers to the number of cylinders in an engine. Common cylinder counts for automotive engines are 3, 4, 6, 8, 10, and 12 cylinders. Engines with displacement below 1 liter typically use three cylinders, 1-2.5 liters generally use four cylinders, around 3 liters usually have six cylinders, around 4 liters have eight cylinders, and above 5.5 liters use twelve cylinders. Relationship between cylinder count and displacement: Generally speaking, with the same cylinder bore diameter, more cylinders mean larger displacement and higher power output. With the same displacement, more cylinders allow for smaller bore diameters, enabling higher engine speeds and thus achieving greater power output.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.