What are the symptoms of a dirty air filter?

1 Answers
BrandonLynn
07/30/25 2:25am
The symptoms of a dirty air filter are: 1. Insufficient air intake, leading to lack of power; 2. Inadequate oxygen supply, causing incomplete combustion, resulting in black smoke emission, excessive carbon deposits in the cylinders, and darkened engine oil. The replacement method for an air filter is: 1. Remove the damping rods on both sides of the glove box; 2. Take off the glove box to reveal a black rectangular cover, pry it open and remove the clips; 3. Take out the old air filter; 4. Install the new filter element. The functions of an air filter are: 1. Ensuring the air conditioning filter fits tightly against the housing to prevent unfiltered air from entering the cabin; 2. Separating dust, pollen, and solid particles from the air; 3. Absorbing moisture, soot, ozone, odors, carbon oxides, SO2, and CO2 from the air, with strong and lasting moisture absorption capabilities; 4. Preventing car windows from fogging up, ensuring clear visibility for the driver and safe driving; 5. Maintaining clean air in the passenger compartment to prevent bacterial growth.
Was this review help?
7
0
Share
More Forum Discussions

What Causes the Steering Wheel Lock and Failure to Start in a Magotan?

Due to the system not detecting the key signal or the anti-theft system not being unlocked, the steering wheel becomes locked and the car cannot start. This is an emergency response of the car's active anti-theft security system. Below are the relevant explanations: For cars without keyless start: First, insert the key and press the brake, then turn the steering wheel left and right. Although the steering wheel is in a locked state at this time, it can be slightly rotated a little when turning. While turning the steering wheel, turn the key to complete the steering wheel unlocking procedure. If you are not skilled, the first attempt might not successfully unlock the steering wheel. Do not panic in such a situation; pull out the key and repeat the above steps 1-2 times, and it should unlock successfully. For keyless start vehicles: The operation steps are basically the same as those for cars with keys, except the step of inserting the key is omitted. First, press the brake, then turn the steering wheel left and right, and finally press the start button to start the car.
10
3
Share

Is it allowed to drive a car while wearing slippers?

No. Article 62, Clause 3 of the "Regulations for the Implementation of the Road Traffic Safety Law" stipulates: Drivers shall not engage in any other behavior that hinders safe driving (depending on the specific behavior). Motor vehicle drivers are not allowed to drive while wearing slippers. In the event of an accident, if one of the drivers is wearing slippers, even if the driver is not at fault for the entire accident and the accident liability is borne by the other party, the driver will still be penalized by the traffic police for driving while wearing slippers. The following are the hazards of driving while wearing slippers: 1. Driving requires the use of both hands and feet: Driving while wearing slippers, like using a mobile phone, eating, or watching TV while driving, violates the "Traffic Law," so we hope all car owners will take this as a warning. In addition, if your foot slips, fails to press firmly, or misses the brake pedal when stepping on the brake, it can easily lead to tragedy. 2. Wearing slippers provides poor foot sensation: It is difficult to control the force applied to the accelerator and brake. Experimental data shows that driving while wearing slippers has the highest danger index. It is reported that a brake reaction tester was installed in a car, and flat shoes and slippers were tested 10 times each for brake reaction. The test results showed that the reaction difference between slippers and flat shoes was 0.6 seconds, meaning slippers were 0.6 seconds slower in reaction time than flat shoes. This 0.6-second difference can affect the braking distance by 17 meters.
2
2
Share

What engine is used in the Changan CS15?

The Changan CS15 is equipped with a high-efficiency engine independently developed by Changan Automobile, produced in Chongqing. The engine model of the Changan CS15 is JL473QF, with a maximum power of 78.5 kW, maximum torque of 145 Nm, maximum horsepower of 107 Ps, maximum power speed of 5500 rpm, and maximum torque speed of 3500-4500 rpm. For daily maintenance of the Changan CS15 engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will deteriorate over time. After a certain mileage, performance degradation can cause various engine problems. To prevent failures, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, it may rupture the filter or open the safety valve, allowing dirty oil to bypass the filter and return to the lubrication system, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from wear to form sludge. Small amounts remain suspended in the oil, while larger amounts can clog filters and oil passages, making lubrication difficult and causing wear. Periodically use a radiator cleaner to flush the radiator. Removing rust and scale not only ensures proper engine operation but also extends the lifespan of both the radiator and the engine.
19
4
Share

Who Manufactures Maserati's Engines?

Maserati's engines are supplied by Ferrari, a supercar manufacturer from Italy. The engine model for Maserati is M156D, with a maximum power of 257 kW, maximum torque of 500 Nm, maximum horsepower of 350 Ps, maximum power speed of 5500 rpm, and maximum torque speed of 1750-4500 rpm. For daily maintenance of Maserati engines, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil based on mechanical load, with the selection standard not lower than the manufacturer's specified requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the relief valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures normal engine operation but also extends the overall lifespan of the radiator and engine.
13
3
Share

Should Rear Seat Passengers Also Wear Seat Belts in Cars?

Rear seat passengers should also wear seat belts. According to relevant regulations, when a motor vehicle is in motion, both the driver and passengers must use seat belts as required. During vehicle operation, failure to wear a seat belt by any occupant is considered a violation of the law. Not wearing a seat belt in the rear seat not only seriously endangers the safety of front-seat passengers but also poses significant safety risks to oneself. Car seat belts are safety devices designed to restrain occupants during a collision, preventing secondary impacts with components like the steering wheel or dashboard, or avoiding ejection from the vehicle, which could lead to injuries or fatalities.
14
0
Share

Where is the BMW engine lifting hook located?

BMW engine lifting hook is located under the turbo and exhaust pipe interface on the right side of the engine. The BMW engine lifting hook is the same as the towing hook: The BMW engine lifting hook and towing hook are identical, but not every vehicle's towing hook can be used. It depends on whether the vehicle model matches the size and thickness of the hook. Engine: BMW 20 engine: The BMW 20 engine is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines (such as gasoline engines), external combustion engines (such as Stirling engines, steam engines), electric motors, etc.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.