What are the symptoms of a damaged exhaust valve in the Tiguan?

What are the physical examination items for obtaining a C1 driver's license?

C1 driver's license physical examination items are as follows: Height. Applicants for large buses, tractors, city buses, large trucks, and trolleybuses must be at least 155 cm tall. Applicants for medium-sized buses must be at least 150 cm tall. Vision. Applicants for large buses, tractors, city buses, medium-sized buses, large trucks, trolleybuses, or trams must have uncorrected or corrected visual acuity of at least 5.0 on the logarithmic visual acuity chart. Applicants for other vehicle types must have uncorrected or corrected visual acuity of at least 4.9 on the logarithmic visual acuity chart. Color vision. No red-green color blindness. Hearing. Able to distinguish the direction of sound sources with each ear at a distance of 50 cm from a tuning fork. Upper limbs. Both thumbs must be intact, and each hand must have at least three other fingers intact, with normal limb and finger movement functions. Lower limbs. Normal movement function. For manual transmission vehicles, the length difference between the lower limbs must not exceed 5 cm. For automatic transmission vehicles, the right lower limb must be intact. No movement dysfunction in the trunk or neck. C1 physical examination requirements: Motor vehicle drivers aged 70 and above (including 70) must undergo an annual physical examination, while those under 70 do not need to. C1 application age: The minimum age limit for a C1 driver's license is 18, with no upper age limit. However, applicants aged 70 and above must pass tests on memory, judgment, and reaction abilities. C1 driver's license: The C1 driver's license is one of the codes for motor vehicle driver's licenses. The C1 license allows driving small and micro passenger vehicles, light and micro cargo vehicles, light, small, and micro special-purpose vehicles, and small passenger vehicles with a seating capacity of 9 or fewer.

8

4

Share

Why Does the Engine Idle High and Shake When Cold?

High idle speed and shaking when the engine is cold are primarily caused by carbon deposits in the engine. These deposits can lead the ECU to make incorrect judgments, resulting in insufficient fuel injection. Even if the air-fuel mixture burns completely, it cannot guarantee adequate power output, inevitably causing shaking. Insufficient ignition energy can also lead to idle shaking. Over time, the spark plug gap may widen, reducing ignition energy and affecting engine performance, which results in vehicle shaking. Engine carbon deposits typically manifest as carbon buildup on the valves and intake passages. In such cases, cleaning the throttle body can provide immediate improvement. However, prevention is key. Avoid prolonged idling, occasionally drive at higher speeds, and use reliable fuel cleaning additives to maintain engine health.

6

0

Share

Why Does Car Air Conditioning Produce Mist?

The reasons for car air conditioning producing mist are: 1. The cooling effect is too good, resulting in excellent cold air performance; 2. The humidity inside the car is too high, making it easy for mist to form; 3. Dirt, scale, and dust accumulation on the evaporator reduce airflow, leading to mist being blown out. Methods to remove mist: 1. Open windows for cross-ventilation. If the mist inside the car is not too heavy, slightly opening the windows on both sides can create air convection between the inside and outside of the car, reducing the temperature difference and gradually dissipating the mist; 2. Using the air conditioning system is the most common method for most car owners to remove mist; 3. Anti-fog spray. Spray the anti-fog agent on the inner surface of the car glass and wipe it clean. This not only removes dirt from the glass but also forms a protective film.

6

4

Share

What is the appropriate pressure for adding refrigerant to a car air conditioner?

For car air conditioner refrigerant charging, the appropriate pressure ranges are 150 to 250 kPa for the low pressure side and 1300 to 1500 kPa for the high pressure side. After completing the refrigerant charging, close the low-pressure manual valve on the manifold pressure gauge, shut off the injection valve on the refrigerant canister, stop the engine, and quickly remove the manifold pressure gauge from the compressor to prevent excessive refrigerant leakage. There are two methods for charging car refrigerant: it can be done from the high-pressure side or the low-pressure side. These two methods differ significantly due to the different states of the refrigerant being charged. The high-pressure side method involves charging liquid refrigerant, which is suitable for initial charging after leak detection and vacuuming. Note that this method requires the engine to be off and the refrigerant canister to be inverted. The low-pressure side method involves charging gaseous refrigerant, which is slower and typically used for topping up refrigerant.

5

1

Share

How many colors does the Magotan have?

The Magotan comes in nine body colors: Phantom Black, Cairo Gold, Caesar Gold, Polar White, Oak Brown, Romanee Red, Quicksand Gold, Elegant Silver, and Prussian Gray. More details are as follows: 1. Generally, the most commonly seen Magotan colors in the market are black and Elegant Silver, with black being the predominant choice. Car color is one of the factors influencing sales, as consumers have varying psychological needs and aesthetic preferences. Compared to other colors, black is one of the primary choices for consumers because the Magotan has a relatively long body, and black accentuates the car's sophistication and elegance. The choice of car color should also depend on the vehicle's design. Some cars do not look good in black, and compared to black cars, white cars have a higher safety factor, as they are more visible during nighttime driving. The advantage of black cars lies in their dignified and business-like appearance. If a car has a smaller body size, white paint is more suitable, whereas black paint is better for larger vehicles. For mid-to-high-end cars, a black exterior is recommended, while compact cars are better suited with a white exterior.

10

3

Share

How to turn on the heating in Haval H9?

Haval H9 heating activation steps are as follows: 1. After starting the car, wait 8-15 minutes until the water temperature rises to normal operating temperature. 2. Adjust the air conditioning circulation mode to internal circulation. 3. Switch to heating mode (indicated by the red zone). When unconscious lane departure is detected, the instrument display will issue an alarm to remind the driver to return to the original lane, improving driving safety. The blind spot monitoring system uses radar detectors to monitor 70m blind spots on both rear sides of the vehicle in real time. When there is danger during lane changing, the in-car warning light will flash accompanied by an audible alarm to alert the driver. 4. At this point, the heating system is activated.

9

4

Share

What are the symptoms of a damaged exhaust valve in the Tiguan?

What are the physical examination items for obtaining a C1 driver's license?

Why Does the Engine Idle High and Shake When Cold?

Why Does Car Air Conditioning Produce Mist?

What is the appropriate pressure for adding refrigerant to a car air conditioner?

How many colors does the Magotan have?

How to turn on the heating in Haval H9?

What is the reason why the dashboard sometimes does not light up and shows nothing?

What does 100W on a tire mean?

What to Do When Your Car Breaks Down Midway?

How to adjust the rearview mirror of Lavida car?