What are the symptoms of a damaged car fuel pump?

1 Answers
DiPaige
07/30/25 7:42am
The fuel pump draws gasoline from the fuel tank and delivers it through pipelines and the fuel filter to the float chamber of the carburetor. When the fuel pump malfunctions, the following symptoms may occur: 1. Weak acceleration with a jerking sensation during sudden acceleration. 2. Difficulty starting the engine, requiring prolonged turning of the ignition key. 3. Unusual noises, such as a buzzing sound while driving. 4. Illumination of the engine warning light. 5. Engine vibration. The damage to the fuel pump may be caused by the following factors: 1. Poor fuel quality: When fuel quality is poor, the fuel tank may contain various impurities or foreign particles. Although the fuel pump has a filter screen to strain the gasoline, it can only block larger particles. Smaller particles may be sucked into the fuel pump motor, causing damage over time. 2. Delayed refueling: Some drivers wait until the fuel warning light comes on before refueling, causing the fuel pump to operate at a lower level. This leads to insufficient cooling and lubrication, resulting in overheating and eventual shutdown of the pump motor. 3. Long-term neglect of fuel filter replacement: Severe clogging of the fuel filter in the fuel supply system makes the fuel pump work harder, leading to prolonged high-load operation and eventual damage to the fuel pump.
Was this review help?
19
3
Share
More Forum Discussions

How to Deal with Water Damage in a Car's Computer?

Here are the steps to handle water damage in a car's computer: 1. Remove the battery: Quickly disconnect the negative terminal of the battery to prevent short circuits in various electrical components due to water exposure; 2. Inspect the engine: Immediately check the engine, starting with whether water has entered the engine cylinders, as this can bend the connecting rods and damage the engine; 3. Check for water in the engine oil: Water in the oil can cause it to deteriorate, losing its lubricating properties and leading to excessive engine wear; 4. Remove the ECU: If the car's Electronic Control Unit (ECU) gets wet or damp, it must be removed as soon as possible. Wipe off any surface moisture, seal it in a plastic bag, and use a vacuum machine to extract all internal moisture.
12
3
Share

Is it normal for a car to shake when starting after releasing the brake?

It is not normal for a car to shake when starting after releasing the brake. The specific causes and solutions are as follows: 1. Engine carbon deposits: Severe carbon buildup is the most common cause of car shaking, often due to a dirty throttle body or excessive carbon deposits in the fuel injectors. When there is too much carbon inside the engine, the gasoline sprayed by the fuel injector during a cold start will be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture and making it difficult to start. In this situation, the car will only start easily once the carbon deposits have absorbed enough gasoline to become saturated. After starting, the gasoline adsorbed on the carbon deposits will be drawn into the combustion chamber by the engine's vacuum, making the air-fuel mixture too rich. This fluctuation between lean and rich mixtures causes the engine to idle roughly after a cold start. Additionally, the lower the temperature, the more fuel is required for a cold start, and the presence of carbon deposits will further affect the smoothness of the cold start. The solution is to clean the fuel system and check if the idle control valve has carbon deposits that need cleaning. 2. Ignition system issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance in the ignition system or weak sparking from the spark plugs can also lead to this type of problem. The solution is to check if the spark plugs have excessive carbon buildup and replace them if necessary.
1
4
Share

What is the gauge on the left side of the car dashboard?

Generally, the left gauge on a car dashboard is the tachometer. The positions of the gauges vary among different cars, but the two main gauges on a car dashboard are the tachometer and the speedometer/odometer. Tachometer: Typically displayed symmetrically with the odometer, it serves as a window for understanding the engine's working condition. The indicated number multiplied by 1000 or 100 represents the engine's revolutions per minute (RPM). The tachometer is usually divided into several zones marked in white, red, or green, representing safe RPM, dangerous RPM, or the most economical RPM range, respectively. Drivers only need to ensure the RPM does not enter the red danger zone. Of course, it's important to match the RPM with the current gear to avoid damaging the vehicle. Speedometer/Odometer: This gauge consists of two parts: the 'speedometer,' which indicates the vehicle's speed, and the 'odometer,' which records the distance traveled. The former informs the driver of the vehicle's speed, aiding in speed control and ensuring driving safety; the latter displays the vehicle's mileage, reminding the driver of maintenance and service needs. Traditional mechanical speedometers were common in the past, but they are increasingly being replaced by electronic ones. The odometer also follows this trend, though its readings are preserved even when the vehicle is powered off. In addition to these, the dashboard may also display a coolant temperature gauge and a fuel gauge: Coolant Temperature Gauge: It actually shows the temperature of the antifreeze, typically ranging between 0-130 degrees. After starting the car, the coolant temperature rises and stabilizes at the middle range, indicating the vehicle is ready to move. Fuel Gauge: This is a crucial indicator for drivers to determine when to refuel. When the needle points to 'E,' it means the vehicle needs fuel, and when it points to 'F,' the tank is full.
19
2
Share

What are the differences between driving wheels and driven wheels?

Driving wheels and driven wheels differ as follows: 1. Driving wheel: The driving wheel converts the engine's energy into kinetic energy, propelling the driving wheel to rotate and enabling the vehicle to move forward or backward. This wheel is called the driving wheel; 2. Driven wheel: The driven wheel has no driving power and only serves a supporting role. Its rotation is driven by other driving forces, hence it's called passive or driven; 3. Specific differences: For example, in a bicycle, the rear wheel that rotates when pedaled is called the driving wheel, while the front wheel that moves along with the rear wheel's motion is called the passive or driven wheel. Cars can be front-wheel drive or rear-wheel drive. The wheels that have driving power are called driving wheels, while those without driving power that follow the motion are called passive wheels.
9
0
Share

What to Do When the Car's Front Windshield is Unclear?

Solutions for unclear front windshield of the car are as follows: 1. In case of icing or freezing: At this time, it is necessary to use a scraper to remove the ice in front of the windshield before driving. 2. If there is fog on the windshield: Use the wipers to clear the water, allowing normal driving. During driving, fog may continue to form; you can open the car windows and wait for the car's water temperature to rise after driving a few kilometers, then turn on the air conditioning to defog. This will quickly dissipate the fog on the windshield.
5
3
Share

What Does Low Fuel Mean?

Low fuel indicates that there is a minimal amount of gasoline left in the vehicle's fuel tank. More knowledge about automotive fuel is as follows: 1. Introduction: Automotive fuel mainly refers to the fuel used in gasoline engines (spark-ignition engines) and diesel engines (compression-ignition engines), which currently serve as the primary power source for vehicle operation. With the development of the global economy, the number of vehicles in use has been increasing year by year, and the environmental pollution caused by vehicle exhaust has become increasingly severe, becoming one of the major sources of air pollution. 2. Alternatives: Automobile manufacturers are continuously improving engine combustion systems, adopting advanced electronic control technologies and high-performance pollution control devices. While using unleaded gasoline, they are also investing heavily in the development of alternative fuels and vehicles that produce fewer emissions and are more environmentally friendly. On a global scale, the most successful alternative fuels are liquefied petroleum gas (LPG) and compressed natural gas (CNG). Since the 1980s, various alternative fuel vehicles and electric vehicles have become the focus of research and development for cleaner fuels.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.