What are the symptoms of a broken clutch in a car?

1 Answers
SanMartin
07/29/25 6:47pm
Signs of a damaged car clutch plate: 1. The clutch pedal becomes higher, requiring it to be fully depressed to engage the gear. Previously, the car would move when the pedal was lifted by 1 cm, but now it requires lifting by 2 cm, indicating that the clutch plate is worn thin and needs to be lifted higher for engagement. 2. Reduced vehicle power. When the engine shows no abnormalities but the car lacks power during startup or climbing, with high engine RPM but insufficient power, it suggests clutch slippage. 3. During high-speed driving, sudden acceleration for overtaking is sluggish. Even when the throttle is pressed, it feels like the engine is revving without the car accelerating, another sign of clutch slippage. In other words, while the engine previously needed 1800 RPM to reach 80 km/h, it now requires 2000 RPM. 4. Another scenario is an uneven clutch surface, which also requires replacement regardless of thickness. The symptoms include severe shaking during startup and at half-clutch, indicating an uneven clutch surface, often due to poor-quality clutch plates. 5. Sudden increase in fuel consumption. While there are many reasons for increased fuel consumption, if any of the above four symptoms are accompanied by higher fuel consumption, it is likely due to a faulty clutch plate.
Was this review help?
7
1
Share
More Forum Discussions

How to Deal with Lavida Sunroof Leakage?

Methods to handle Lavida sunroof leakage: 1. The rubber sealing strip around the sunroof edge may have aged or cracked, leading to poor sealing. Regular maintenance of the rubber sealing strip around the sunroof edge is essential. Purchase a rubber protectant spray and apply it to prevent rubber erosion; 2. Lack of lubricant on the sunroof tracks may cause squeaking noises when the sunroof is operated. Simply apply grease to the tracks to resolve this issue. The Lavida (LAVIDA) is the first A-segment car independently developed by Shanghai Volkswagen, with body dimensions of 4605mm in length, 1765mm in width, and 1460mm in height.
1
5
Share

What is the method for removing a car battery?

Car battery removal method is: 1. First open the battery compartment; 2. Then you will see a fixed bar fastened on top of the battery, use an 8-size wrench to loosen it; 3. After loosening, remove it. This is followed by the most critical part involving safety issues, so be sure to carefully follow each step before acting, otherwise sparks or battery burning may easily occur; 4. Next to the battery, you will see icons indicating positive and negative terminals, remove the negative terminal first; 5. Then repeat the previous step to remove the positive terminal, during the removal process try to avoid contact with metal parts.
1
4
Share

What does TCS mean on a car?

TCS on a car stands for Traction Control System, which ensures that the vehicle obtains optimal traction under various driving conditions. The control device of the Traction Control System is a computer that monitors the speed of all four wheels and the steering wheel's turning angle. When the car accelerates and the computer detects an excessive speed difference between the driving wheels and non-driving wheels, it immediately determines that the driving force is too high and sends a signal to reduce the engine's fuel supply, thereby decreasing the driving force and reducing the slip rate of the driving wheels. The Traction Control System is also known as the Anti-Slip Regulation (ASR) system. When braking on slippery surfaces, the wheels may skid, potentially causing a loss of directional control. Similarly, during startup or rapid acceleration, the driving wheels may also skid, especially on icy or slippery roads, leading to dangerous loss of control. The Traction Control System is specifically designed to address these issues.
5
1
Share

What are the causes of unstable idle speed and stalling in cars?

The causes of unstable idle speed and stalling in cars include: air intake system leaks, low fuel pressure, clogged air filters, fuel injector atomization leaks, improper idle speed adjustment, faulty spark plugs, and air flow meter malfunctions. Under normal circumstances, the intake air volume must be strictly controlled. If there is a leak in the intake pipe, the air flow sensor cannot accurately measure the actual intake air volume, causing the electronic control unit to inaccurately control the air intake and resulting in unstable idle speed. Fuel injector dripping, clogging, or circuit malfunctions can affect the quantity and quality of fuel injection, preventing it from following the electronic control unit's instructions. This leads to an excessively rich or lean air-fuel mixture, causing poor performance in individual cylinders and unstable idle speed.
1
4
Share

How to Test if an Oxygen Sensor is Good or Bad?

Testing the condition of an oxygen sensor can be determined by observing the color of its tip. If the tip is light gray, it indicates that the oxygen sensor is functioning normally. If the tip is white, it suggests that the oxygen sensor has failed due to silicon contamination. The oxygen sensor is an essential component for the engine to reduce exhaust pollution. Once the air-fuel ratio of the mixture deviates from the theoretical value, the oxygen sensor detects the oxygen concentration in the exhaust and controls the fuel injection amount via feedback to maintain the air-fuel ratio within the normal range. The oxygen sensor calculates the oxygen concentration based on chemical equilibrium to monitor the air-fuel ratio of the mixture. Therefore, if the oxygen sensor is faulty, it cannot monitor the vehicle's exhaust emission values. The core component of the oxygen sensor is a porous ZrO2 ceramic tube. At certain temperatures, high-concentration oxygen molecules inside the tube can be adsorbed to form electrons, creating a potential difference.
4
4
Share

What engine does the new MX5 use?

The new MX5 is equipped with a 2.0L inline four-cylinder DOHC engine, delivering a maximum power of 116kW and a maximum torque of 200Nm. It is paired with a 6-speed automatic transmission with manual shift mode. The new MX5 is a vehicle launched by Mazda, featuring some of the brand's traditional classic elements in its front design, such as the rounded body lines, the wide family grille, and the adorable "small eyes", presenting a simple yet friendly appearance. The new MX5 adopts a front double-wishbone and rear multi-link suspension system with rear-wheel drive, showcasing its inherent sporty nature. In corners, thanks to excellent suspension support, the body roll is minimal. The steering wheel offers moderate feedback, neither as light as traditional Japanese cars nor as heavy as European cars, providing clear road feel. The overall driving experience can be described as light and agile.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.