What are the steps to turn off the rear wiper on the Edge?

2 Answers
SanAngelina
07/28/25 3:34pm
To turn off the rear wiper on the Edge, follow these steps: Locate the rear wiper control lever on the right-hand side of the steering wheel. Move the lever to the OFF position to deactivate the wiper. Detailed maintenance tips for wipers are as follows: 1. When using the wiper to remove dust from the windshield on sunny days, always spray windshield washer fluid to avoid dry wiping. 2. If there are stubborn or hard contaminants on the glass, remove them manually. These can easily damage the wiper blade, resulting in poor wiping performance. 3. When lifting the wiper blade during car washing or routine cleaning, hold it by the "backbone" and gently return it to its original position. 4. In winter, use an ice scraper to remove ice from the window surface before using the wiper to prevent overloading it. 5. If contaminants on the wiper are difficult to remove or if the wiper itself malfunctions, seek professional repair as soon as possible.
Was this review help?
20
1
Share
SanSteven
08/11/25 10:55pm
Turning off the rear wiper on the Edge is actually quite straightforward. As an experienced driver who has owned several Edge models, here's the proper procedure: First, sit in the driver's seat and start the ignition to activate the electronic controls. Locate the control stalk on the left side of the steering wheel (easily accessible with your right hand). There's a dedicated rotary knob for the rear wiper - simply turn it to the OFF position. Operate it gently without rushing; wait until you visually confirm the rear wiper has stopped moving before releasing. After deactivation, it's wise to walk around and inspect the rear window's cleanliness to ensure no water streaks obstruct visibility. Make it a habit to turn it off when parked - leaving it on overnight may drain the battery or freeze the blades in winter. Maintain the rubber blades with biannual replacements for cost-effective upkeep. Once I forgot to turn it off and encountered motor noise next morning, resulting in a costly $100+ motor replacement. Memorize these simple steps and perform a quick pre-drive check for peace of mind.
Was this review help?
20
3
Share
Expand All
More Forum Discussions

How Long Does It Take to Get a License Plate?

Generally, it takes three to five working days to receive the license plate. Introduction to License Plates: License plates, commonly known as vehicle plates, refer to the plates affixed to the front and rear of a vehicle, displaying the registration number, registration region, or other relevant information. Function of License Plates: License plates serve as a numbering and information registration system for vehicles. Their primary purpose is to identify the vehicle's region of registration and to trace the owner and registration details of the vehicle through the plate number. Precautions for License Plate Registration: The process must be completed at the vehicle management office. After submitting all required documents and paying the necessary fees, the vehicle must undergo an inspection at the office. Some exempt vehicles only require an external inspection, which typically involves checking the engine number and chassis number. Once the inspection is complete, you can proceed to the office's main hall to select your license plate.
7
0
Share

What are the differences between the Mercedes-Benz GLC260 and GLC300?

Here are the differences between the GLC260 and GLC300: 1. Power: The GLC260 has a maximum horsepower of 197ps; the GLC300 has a maximum horsepower of 258ps. The GLC260 has a maximum torque of 320nm; the GLC300 has a maximum torque of 370nm. The GLC260 accelerates from 0-100km/h in 8.4 seconds; the GLC300 does it in 6.9 seconds. The GLC260 has a maximum power of 320kW; the GLC300 has a maximum power of 190kW. 2. Vehicle configuration: The 300 series adds features compared to the 260, including lane change assist, lane departure warning, lane keeping assist, 360-degree panoramic camera, hands-free trunk access, keyless entry for all doors, side running boards, steering wheel memory, built-in dashcam, leather seats, driver seat memory, and more.
9
1
Share

What Causes Severe Vibration When the Air Conditioner is Turned On in an Accord?

Here are the reasons why an Accord may vibrate severely when the air conditioner is turned on: 1. Check the refrigerant pressure of the air conditioner: If the refrigerant pressure is too high, it may cause the engine idle to be unable to handle the load. 2. Excessive engine carbon buildup: Inspect and clean the fuel system, injectors, throttle body, idle air control valve, and intake manifold if there is excessive carbon buildup. 3. Check if the initial fuel pressure is too low: Due to prolonged parking, the fuel system pressure may be too low or the fuel pressure regulator may not maintain pressure properly, making it difficult to establish the standard fuel pressure instantly, which can lead to insufficient cold-start fuel injection and poor starting. 4. Inspect the air filter: Check if the air filter is too dirty, affecting the quality of the intake air, which can result in insufficient air volume during startup.
14
5
Share

What kind of car is Royce?

Rolls-Royce is a luxury car manufacturer, also translated as Luoersi-Luoyisi in Chinese. Established in the UK in 1906, it was acquired by BMW in 2003. Here are some key details about Rolls-Royce: 1. Brand History: Rolls-Royce represents the epitome of elegance and nobility in the automotive kingdom. Regardless of how classic its models may appear or how high their production costs are, Rolls-Royce remains unchallenged to this day. The company was officially founded in the UK in 1906, and the Silver Ghost model introduced the following year was soon acclaimed as 'the best car in the world.' 2. Manufacturing Process: Rolls-Royce engines are entirely handcrafted. Even more astonishing is that the radiator grille at the front of each Rolls-Royce is meticulously crafted by skilled workers using only their hands and eyes, without any measuring tools. It takes a full day for a worker to complete a single radiator, followed by an additional five hours of polishing and finishing.
15
5
Share

What are the reasons for a large vehicle not inflating?

The reasons for a large vehicle not inflating are the softening of the built-in spring plate in the air pump, blockage in the air pump pipeline, or air leakage in one of the four circuits. Poor quality of the air pump or insufficient pressure from the air pump can make inflation very slow and laborious. Concept of an air pump: An air pump, also known as an "air pump," is a device that either removes air from a closed space or adds air to it. Classification of air pumps: Air pumps are categorized into electric air pumps, manual air pumps, and foot-operated air pumps. Working principle of an air pump: The engine drives the crankshaft of the air pump via two V-belts, which in turn drives the piston to inflate. The air produced is then directed into the air storage tank through pipelines.
15
0
Share

What is the reason for the car air conditioning blower only working in the first gear but not in other gears?

The reasons for the car air conditioning blower only working in the first gear but not in other gears are as follows: Poor contact: The main control switch has poor contact, and the switch should be replaced in time. Use a multimeter to measure the contact resistance of the main control switch, and the main control switch or the fan motor coil should be replaced promptly. Wire port damage: Damage to the fan motor wire port. Loose screws: The fastening screws between the fan motor and the fan blade are loose, and the fastening screws should be tightened. Fan capacitor open or short circuit: The fan capacitor is open or short-circuited. The capacitor should be checked promptly, and if necessary, a capacitor of the same specification should be replaced in time.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.