What are the steps to start an automatic transmission vehicle?

1 Answers
LaArcher
07/29/25 9:14pm
Automatic transmission vehicle starting steps are as follows: 1. Insert the key and turn it to the second ignition position (power mode), wait for the system self-check to complete; 2. Shift the gear lever from P to N; 3. Release the brake and start the engine; 4. Press the brake pedal with your foot, shift the gear lever from N to D, then release the brake and press the accelerator to start moving. Automatic transmission driving tips include: 1. Accelerate gently when starting, always start in P or N gear, never coast in neutral; 2. Shift to N gear when waiting at traffic lights or during brief stops, use P gear when parking; 3. Never shift to P gear while the vehicle is moving; 4. Ensure the vehicle comes to a complete stop before shifting to R gear for reversing.
Was this review help?
19
0
Share
More Forum Discussions

Is National VI the same as China 6?

National VI is China 6, which is the latest phase of China's automotive emission standards. The China 6 standard was released in 2016 and was planned to fully replace the current China 5 standard starting from July 1, 2020. The full name and designation of the China 6 standard is: "Limits and Measurement Methods for Emissions from Light-duty Vehicles (China 6)" (GB18352.6—2016). Here is some relevant information: 1. The China 6 standard is also formulated with reference to the EU emission standards and has introduced a phased implementation plan. The first phase, China 6a, will replace the China 5 standard starting from July 1, 2020; the second phase, China 6b, will replace the China 6a standard starting from July 1, 2023. 2. The China 6 standard was released by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection and Quarantine on December 23, 2016, and June 22, 2018, respectively. The implementation of the China 6 standard will impose stricter requirements on emissions such as carbon monoxide, nitrogen oxides, and hydrocarbons.
13
2
Share

What causes the trunk of a Cruze to not open?

If the trunk can be opened with the remote control, then the trunk switch is damaged. If it cannot be opened with the remote control, the lock block is damaged. There is an emergency escape switch on the trunk lock; pulling it down will open the trunk. Below are the reasons why the Cruze trunk may not open: 1. Many Cruze owners encounter the issue where the trunk can be opened with the remote but not manually. The reason for this is usually a damaged trunk lock switch, possibly due to rainwater entering the switch area and causing corrosion. This is a relatively high failure rate issue, and the only solution is replacement. You can get it replaced at a 4S store, which is free during the warranty period. 2. If neither the remote nor manual methods work, it could be due to a damaged trunk lock block, which would require replacement. Additionally, there is a master switch for the trunk lock above the lock block; check if the trunk not opening is due to the master switch being turned off.
6
2
Share

Can a New Car Be Driven on the Highway?

New cars can be driven on the highway, but there are 4 precautions to keep in mind: 1. Do not blindly drive at high speeds on the highway. The first batch of engine oil contains many metal particles, and accelerating recklessly on the highway can increase internal engine wear. 2. The engine speed should not be too high and should be kept within 3,000 to 4,000 RPM. A newly purchased car requires a break-in period, and if the speed exceeds 4,000 RPM initially, it can cause damage to the car. 3. Avoid driving on the highway for extended periods. Continuous high-load operation of the engine can easily lead to increased wear on mechanical parts. For a new car, prolonged highway driving means high-load operation for the engine. 4. For automatic transmission cars, switch to manual mode to flexibly adjust the car's speed and reduce wear and tear.
10
5
Share

What Causes Slow Engine Coolant Temperature Rise?

Slow engine coolant temperature rise may be caused by a malfunctioning thermostat. If the thermostat is damaged and causes the coolant to remain in the major circulation loop, it will result in slower engine temperature rise. In such cases, it is recommended to check whether the thermostat is functioning properly. Below is a detailed explanation: 1. Car engines rely on coolant for heat dissipation. During engine operation, the coolant continuously circulates within the engine to remove excess heat. The coolant follows two circulation paths inside the engine: a major circulation loop and a minor circulation loop. 2. When the engine is first started and the temperature is still low, the coolant circulates in the minor loop. During minor circulation, the coolant does not pass through the engine radiator for cooling, which helps the engine warm up quickly. Once the engine reaches normal operating temperature, the coolant switches to major circulation.
19
4
Share

What Causes Steering Wheel Vibration at High Speeds in Sedans?

There are several reasons why the steering wheel of a sedan may vibrate at high speeds: 1. Wheel balance issues. A car's wheel is composed of a tire and a rim. When there is a problem with the wheel balance, it means the wheel is not in a balanced state during high-speed driving. In other words, if the wheel balance data is incorrect, the wheel's rotation center will shift, causing the wheel to vibrate, which in turn affects the steering wheel. 2. Rim problems. If the car's rim has been impacted during previous driving, causing it to deform, then during subsequent driving, the deformation of the rim can also cause the wheel to vibrate, leading to steering wheel vibration. 3. Chassis component issues. This problem is less likely to occur and is generally found in cars that have been poorly repaired after an accident. The impact from the accident can affect the chassis components, also resulting in steering wheel vibration. Although rare, it cannot be ruled out.
15
0
Share

Where do license plates starting with 'Su' belong to?

License plates starting with 'Su' belong to Jiangsu Province. Here is some information about license plates: 1. License plates, commonly known as vehicle plates, refer to the number plates hung on the front and rear of a vehicle. They are usually made of materials such as aluminum, iron, plastic, or paper, and are engraved with the vehicle's registration number, registration region, or other relevant information. 2. License plates serve as identification and information registration for vehicles. Their main function is to identify the region to which the vehicle belongs, and the owner and registration details of the vehicle can be traced based on the license plate. 3. License plate numbers can be customized, except for the first two characters which must comply with national regulations; the rest can be freely chosen.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.