What are the steps to reset the tire pressure on an Audi A3?

1 Answers
VonAva
07/29/25 6:30pm
The steps to reset the tire pressure on an Audi A3 are: 1. Turn on the ignition and press the multifunction button on the left side of the steering wheel to bring up the menu interface on the instrument panel; 2. Select the maintenance option, find the tire inflation pressure, and press the CAR button; 3. Choose the tire pressure monitoring system and then click to store the tire pressure. Taking the Audi A3 2021 model as an example, its body dimensions are: length 4351 mm, width 1815 mm, height 1458 mm. The Audi A3 2021 model is equipped with a 1.4T turbocharged engine, with a maximum power of 110 kW and a maximum torque of 250 Nm, paired with a 7-speed dual-clutch transmission.
Was this review help?
9
3
Share
More Forum Discussions

Is the Wuling Hongguang miniev convertible an electric car?

Wuling Hongguang miniev convertible is an electric car. The following are the specific details of the Wuling Hongguang miniev: 1. Vehicle Positioning: The Wuling Hongguang miniev is a micro-sized pure electric vehicle with the battery located beneath the chassis. It can be charged using a standard 220V three-pin household power supply with a charging power of less than 2kW, and the charging time is approximately 6 to 9 hours. 2. Features: The driver and front passenger seats can be adjusted forward and backward, and the backrest angle can be adjusted. The rear seats support a 50:50 split-folding ratio. The vehicle comes equipped with features such as brake force distribution, ABS anti-lock braking system, tire pressure monitoring, child seat anchors, seatbelt reminder, parking sensors, hill start assist, aluminum alloy wheels, full LCD instrument panel, power windows, and remote door locks. 3. Lithium-ion Battery: The entire lineup is equipped with lithium-ion batteries, which offer slightly better reliability compared to lithium carbonate batteries.
4
0
Share

How to Set Up Automatic Car Locking?

Start the vehicle and hold down the lock button, drive at a speed not exceeding 20 mph, and the car lock setting will be successful. The purpose of the automatic locking function is to prevent theft, allowing the car to lock quickly after driving, preventing door-pulling robberies during traffic jams or at red lights, which can provide a certain level of security. Below is an introduction to automatic car locking: 1. Method to activate automatic locking for automatic transmission models: (1) Put the gear in the P position. (2) Turn the key to the ON position, with all four doors closed. (3) Press the lock button. (4) Observe the hazard indicator flashing twice on the dashboard. (5) Operation completed. 2. Method to set up automatic locking for manual transmission models: (1) Turn the ignition switch to the "ON" position. (2) Within 20 seconds, press the electric door lock switch to "LOCK" and hold for 5 seconds. (3) If the operation is successful, the hazard indicator will flash as follows: twice to enable; once to disable.
11
4
Share

Why Do Heavy Trucks Need to Add Urea?

Heavy trucks must add urea, which is used for cars, trucks, buses, and heavy non-road diesel engine vehicles equipped with SCR systems. It helps purify vehicle exhaust, reduce nitrogen oxide emissions, optimize engine performance and fuel consumption, and significantly lower costs. Below is an introduction to urea: 1. SCR stands for Selective Catalytic Reduction Technology. Automotive urea can catalytically reduce nitrogen oxides (NOx) in diesel vehicle exhaust into harmless nitrogen (N2) and water in the SCR system. 2. Urea is added for diesel engines because they emit harmful nitrogen oxide gases during operation, which are hazardous to the atmosphere and human health. Long-term exposure to these gases can cause respiratory diseases. To mitigate these risks, urea is used. 3. If urea is not used, or if the urea quality is poor or impure, it can cause the vehicle's engine to automatically decelerate and contaminate the catalyst in the SCR catalytic reaction tank, leading to severe consequences. Typically, the remaining urea level is displayed on the dashboard, and a warning light will illuminate when the urea is depleted. The urea consumption is approximately 3%~5% of the fuel consumption.
7
0
Share

Where is the Peugeot 408 Fuse Box Located?

Peugeot 408 fuse box is located in the engine compartment. Below are the detailed introductions about the fuse box: 1. Function: The fuse box is an overcurrent protection switch, mainly used to control the operation of the circuit. There are many circuits in a car, and the fuse plays the role of protecting the circuit. When the temperature of the circuit is too high or the current is too large, the fuse can blow to protect the circuit. 2. Impact of Blowing: There are many fuses and relays in the car fuse box. When a fuse blows, certain functions of the car will be affected. After the fuse blows, it needs to be replaced with a new one. 3. Replacement Precautions: When replacing a fuse, use a special clip to remove the fuse. The fuse box in the engine compartment is generally located near the battery, while the fuse box in the cabin is usually located in the main driver's position or the glove compartment of the passenger seat.
3
0
Share

What are the differences between Haval Chitu and Haval Chu Lian?

Here are the specific differences between Haval Chitu and Haval Chu Lian: 1. Dimensions: The Haval Chu Lian measures 4472*1841*1619MM in length, width, and height, while the Haval Chitu measures 4470*1898*1625MM. Although both cars share the same wheelbase of 2700MM, the Chu Lian has a longer body, whereas the Chitu is taller and wider. 2. Features: Comparing the entry-level automatic transmission models of both cars, the Haval Chitu offers additional features such as front side airbags, rearview camera, drive mode selection, engine start-stop, hill descent control, panoramic sunroof, roof rails, keyless entry, and faux leather seats compared to the Haval Chu Lian. 3. Performance: Both the Haval Chu Lian and Chitu are equipped with a 1.5T turbocharged engine paired with a 7-speed wet dual-clutch transmission. However, the Haval Chitu has superior tuning, with the Chu Lian producing 150 horsepower and 220 Nm of torque, while the Chitu delivers 184 horsepower and 275 Nm of torque.
4
4
Share

Why Does a Rolls-Royce Appear to Glide?

Rolls-Royce vehicles appear to glide due to the use of floating wheel hubs, which operate on a principle similar to that of a roly-poly toy. The floating wheel hub employs an additional bearing that can move around the central axis. When the wheel is in motion, this bearing keeps the hub in a perpetually floating state. Here are some details about Rolls-Royce: 1. The Rolls-Royce Phantom is the first product launched after Rolls-Royce was acquired by BMW. Thanks to the use of aluminum, the massive body weighs less than 2.5 tons. Coupled with the collaboration of a 6.7-liter V12 engine and a six-speed automatic transmission, the Phantom accelerates from 0-100 km/h in under 6 seconds. For safety reasons, the top speed is limited to 240 km/h. 2. The Phantom's suspension system features a front double-wishbone design, with an upper wishbone and a lower control arm connected via a control rod to form a complex suspension system. The rear uses a multi-link design with a fixed control arm, which not only enhances vehicle stability but also provides anti-dive and steering assistance functions.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.