What are the steps to reset the maintenance reminder on the Ford Kuga?
4 Answers
The steps to reset the maintenance reminder on the Ford Kuga are as follows: 1. Close all doors and windows. 2. Turn on the ignition switch. 3. Simultaneously press and hold the accelerator and brake pedals for about 3 seconds, and the dashboard will display an interface that lasts for 25 seconds. 4. After 25 seconds, the interface will show "complete," indicating that the maintenance reminder has been reset. Below is some related information about the Ford Kuga: 1. Taking the 2019 Ford Kuga as an example, its body dimensions are 4524mm in length, 1838mm in width, and 1685mm in height. 2. The Kuga is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 182ps, a maximum power of 134kw, and a maximum power speed of 6000rpm per minute.
I used to drive a Ford Escape, and resetting the maintenance reminder light was quite simple. First, turn off the ignition and make sure the engine is completely shut off while sitting in the driver's seat. Then, press and hold the ODO button on the dashboard—the one that displays the mileage. Next, turn the key to the 'on' position without starting the engine, hold it for about ten seconds, and you'll see the maintenance reminder start flashing. After hearing a beep, release the button, and the light will turn off. This is mainly because the car's computer is set to remind you when maintenance is due, and resetting it allows the timer to start anew. I recommend checking it yourself every month instead of waiting for the light to come on, as this helps extend the engine's lifespan. If you accidentally make a mistake, the light might come back on, so don’t rush—just try a few more times. Regular maintenance keeps the car running smoothly and reduces breakdowns.
I've worked on quite a few cars and have mastered the steps to reset the maintenance reminder on the Ford Kuga. Turn off the engine and sit tight, hold down the trip button without releasing it, then turn the key to the ACC position (ON but without starting the engine). Hold steady for about ten seconds until the dashboard prompt changes, then release it—the reset is complete. Sometimes it's easy to press the wrong button, so make sure to aim for the center of the dashboard. If there's no response, check whether the key is turned to the correct position or if the battery voltage is low—don't let a drained battery affect the system. This reminder is for oil changes and filter checks, so reset it promptly to avoid car issues. It's recommended to inspect maintenance items every 5,000 km or every six months. Doing it yourself saves hassle and money, avoiding the time-consuming trip to the dealership.
Hey, resetting the maintenance light on the Ford Kuga isn't hard! Close the door and turn off the engine, hold down the ODO button on the dashboard, turn the key to the ON position for about ten seconds, and when the light flashes, the reset is complete. Don't move around while holding the button; the system will automatically detect. This reminder is for regular oil maintenance, and delaying it can harm the engine, so I always change the oil before the reminder. Additionally, it's more reliable to check the air filter and tire pressure at the same time.
