What are the steps to reset the maintenance light on a Suzuki Swift?

2 Answers
DaniellaMarie
07/25/25 1:26am
The steps to reset the maintenance light on a Suzuki Swift are: 1. Turn on the ignition switch, then press and hold the trip meter reset button for more than 5 seconds; 2. The information display will flash "OIL" once and then continue to display "OIL"; 3. Release the trip meter reset button and quickly press the button 5 times consecutively within 2 seconds; 4. After "OIL" flashes 3 times and turns off, the reset operation is completed. Taking the Swift 2016 1.5L Automatic Fashion Cool Play Edition as an example: The manufacturer of this car is Changan Suzuki, its class is a compact car, the energy type is gasoline, the transmission is a 4-speed automatic, the body type is a 5-door 5-seat hatchback, and the top speed is 173 kilometers per hour.
Was this review help?
15
2
Share
LaDominic
08/10/25 4:07pm
When it comes to resetting the maintenance light, I really enjoy doing it myself, especially for models like the Suzuki Swift. I've tried it a few times, and the steps aren't too complicated: first, don't start the car, turn the key to the off position to completely cut the power. Then, press and hold the TRIP button on the dashboard without releasing it. Next, gently turn the key to the ON position, where the dashboard lights up but the engine doesn't start; at this point, you'll see the maintenance light start flashing. Keep holding the button for about 5 to 10 seconds until the light goes off or stabilizes, then release the button. Finally, turn the key off and on again to check if the indicator light is gone. The whole process requires careful attention, as pressing the wrong steps might accidentally trigger other systems or fail to reset the light properly. If it doesn't work the first time, don't worry—try a couple more times or check the manual. This light mainly reminds you of the oil change interval, and during regular maintenance, you should also pay attention to replacing the filter and fluids to extend the car's lifespan. I find DIY quite rewarding, at least saving the hassle and cost of going to a shop, but if you're unsure, it's better to seek professional help—safety first.
Was this review help?
16
4
Share
Expand All
More Forum Discussions

Should the Reiz use 92 or 95 octane gasoline?

Both 92 and 95 octane gasoline can be used for the Reiz, according to the manufacturer's specifications. The vehicle is allowed to use 92 octane gasoline, but it is recommended to use gasoline with an octane rating higher than 92 for better performance. The fuel tank cap indicates that 92 octane gasoline is permissible, while 95 octane gasoline is recommended. This means that while 92 octane gasoline is acceptable, using 95 octane gasoline can provide the engine with better power output. The Reiz has a body size of 4750 mm in length, 1795 mm in width, and 1450 mm in height, with a wheelbase of 2850 mm. The Reiz features a front-engine, rear-wheel-drive layout, with a double-wishbone front suspension and a multi-link independent rear suspension. The body structure is of a unibody design.
11
2
Share

Why is one Honda fan spinning while the other is not?

Honda fan one turns one does not turn the reasons are as follows: 1. Improper maintenance: The crankshaft is short of oil, you can evenly apply engine oil (lubricating oil, etc.) on the shaft position. 2. The starting capacitor capacity becomes smaller: This is because the fan has been used for too long, resulting in insufficient motor starting torque, and the internal electrical components need to be replaced. 3. Motor overheating: Check whether the internal wiring of the fan is normal and replace the components. Information about the fan is as follows: 1. Fan: Refers to a tool used to generate wind and cool down in hot weather. 2. Working principle: The energized coil is subjected to force in the magnetic field and rotates. 3. Energy conversion form: Electrical energy is mainly converted into mechanical energy, and at the same time, because the coil has resistance, it is inevitable that part of the electrical energy will be converted into heat energy.
3
5
Share

Which Mercedes-Benz model has a yellow license plate?

Mercedes-Benz Pullman is the first Mercedes-Benz model in China to have a yellow license plate. Here are some details about the Mercedes-Benz Pullman: 1. Design elements: The new Mercedes-Benz Pullman features a completely new design, especially the headlights, which deviate from the design of the standard Mercedes-Benz S-Class, incorporating daytime running lights. 2. Overall configuration: The overall configuration has reached the top level among Mercedes-Benz models. For global elites, the Mercedes-Benz Pullman fully meets the luxury needs of drivers. After its introduction into the domestic market, its unique positioning means it has no direct competitors. Rear seat interior features of the Mercedes-Benz Pullman include: a car refrigerator, temperature-controlled wine glass holders, an 18.5-inch display screen, electric curtains, massage functions for both the driver's cabin and the boss seat, woolen shoe pads, goose down headrests, speedometer, thermometer, clock, as well as an essential intercom system and optional electric door closing system.
18
5
Share

What is the reason for the buzzing sound inside the Mercedes-Benz E300?

The buzzing sound inside the Mercedes-Benz E300 is caused by the operation of the secondary air pump, which is designed to pump air into the exhaust pipe. This process facilitates the secondary combustion of exhaust gases and helps the catalytic converter reach its optimal operating temperature more quickly. This sound only occurs during cold starts and operates a maximum of two times. Below is an introduction to the Mercedes-Benz E300: 1. Body dimensions: The length, width, and height are 5078mm, 1860mm, and 1490mm respectively, with a wheelbase of 3079mm and a fuel tank capacity of 66 liters. 2. Suspension: The front suspension is a multi-link independent suspension, and the rear suspension is also a multi-link independent suspension. 3. Powertrain: It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 184 PS, a maximum power of 135 kW, and a maximum torque of 280 Nm, paired with a 9-speed automatic transmission.
16
1
Share

What is the application range of gear oil 85w140?

Gear oil 85w140 is typically suitable for use in temperatures ranging from -16°C to 50°C throughout the year. Functions of gear oil: Gear oil should possess excellent anti-wear properties, load-bearing capacity, and appropriate viscosity. It should also have good thermal oxidation stability, anti-foaming properties, water separation performance, and rust prevention. Since gear loads generally exceed 490 MPa, and the load on hypoid gear surfaces can reach as high as 2942 MPa, gear oil accounts for approximately 6%-8% of the total lubricant consumption. Gear oil is a high-performance lubricant. Properties of gear oil: Suitable viscosity and good viscosity-temperature characteristics are fundamental properties of gear oil. Higher viscosity results in a thicker lubricating oil film, which provides relatively greater load-bearing capacity. Extreme pressure anti-wear performance is the most important and distinctive feature of gear oil. It prevents wear, scuffing, and scoring of gear surfaces during operation.
2
3
Share

What is the difference between a twin-cylinder and a four-cylinder engine of the same displacement?

The difference between a twin-cylinder and a four-cylinder engine of the same displacement mainly lies in low-speed torque and the smoothness of power at medium to high speeds. Twin-cylinder engines have greater low-end torque: Generally, twin-cylinder engines produce more torque at low speeds compared to four-cylinder engines. However, they also generate more noticeable noise and vibrations. Twin-cylinder engines are cheaper to manufacture, more compact, and relatively easier to maintain, making them a popular choice for many mainstream motorcycles. Four-cylinder engines operate more smoothly: Due to their four-cylinder configuration, these engines run more smoothly than twin-cylinder engines, with significantly reduced vibrations and noise. They also achieve higher speeds more easily. However, four-cylinder engines have a more complex structure and require extremely high manufacturing precision, resulting in higher costs. As a result, motorcycles equipped with four-cylinder engines are relatively rare.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.