What are the steps to reset the maintenance light on a 2017 smart?
3 Answers
17 smart maintenance light reset steps are: 1. Turn the ignition switch ON, quickly press the left button on the instrument panel three times; 2. The instrument will display voltage or temperature, press the confirmation button on the left side of the steering wheel once; 3. The display will show 'SERVICE', then press the plus/minus buttons on the right side of the steering wheel to select 'Reset all services'; 4. Press the confirmation button, and the instrument screen will display that the reset was successful. The 2017 smart features a two-tone body color scheme of orange and black, providing a more striking visual impact compared to the standard smart model. Additionally, the limited 'Burn Orange' edition comes with smoked headlights, black mirror covers, and an emblem with the 'Burn Orange' inscription.
Successfully reset the maintenance light on my 2017 Smart, and I'd like to share the DIY steps from my experience. It's quite simple and doesn't require professional tools. First, turn off the ignition switch without starting the engine. Then, press and hold the TRIP button on the left side of the steering wheel. Turn the ignition switch to the ON position (dashboard lights up but don't start the car). You'll see the maintenance reminder flashing, sometimes with a small menu appearing. Continue holding the button for a few seconds until a confirmation message for reset appears. Then, use other buttons to select the RESET option and confirm to complete the process. After finishing, check if the light is off; if not, repeat the steps. Remember to ensure safety throughout the process: park on level ground with the handbrake engaged to avoid any careless operations that might cause a short circuit. It's important to address the maintenance light promptly as it reminds you to change oil and inspect the engine on time, preventing minor issues from becoming major problems while saving unnecessary expenses at the dealership. Doing this yourself helps you learn more car maintenance tricks and gives a sense of accomplishment.
As a car enthusiast who often tinkers with electronic devices, the 17 Smart's maintenance light reset relies on the vehicle's computer system. First, turn off the ignition to ensure the car is stationary. Press and hold the TRIP button on the dashboard, then turn the ignition to the ON position. The maintenance menu will appear on the instrument screen. Use the button to navigate up and down to select the reset option and confirm. Remember, these operations only reset the indicator light and do not mean the maintenance is done. After resetting, go change the engine oil—that's the proper way. Avoid pressing the brake or touching other buttons during the process to prevent accidental short circuits. The principle is that the car's ECU module stores maintenance data, and resetting updates the mileage information to turn off the light. The Smart is quite nimble, but its electronic system is delicate, so be careful not to damage the circuits while operating. DIY not only helps you learn but also saves money.
