What are the steps to replace wiper blades on a BMW?

1 Answers
LandonRose
07/29/25 6:53pm
Taking the BMW 3 Series as an example, the steps to replace the wiper blades are: 1. First remove the old wiper blade by pressing the buckle on it to release the fastener securing the wiper; 2. Then press the lower cover to remove it and take off the old wiper blade; 3. Open the cover of the new wiper blade, fit the wiper connector, press it firmly into place, and close the cover. Use the same method to install the new wiper blade on the passenger side. In terms of body dimensions, the BMW 3 Series has a length of 4719mm, width of 1827mm, height of 1459mm, and a wheelbase of 2851mm. The body type is a 4-door, 5-seat sedan, equipped with an 8-speed automatic transmission.
Was this review help?
14
2
Share
More Forum Discussions

How to Check Tire Pressure in the 2021 ix35?

Check if there is a SET button next to the gear lever. First, inspect the tire pressure of all four tires to ensure they are at the normal level. Then start the car and press and hold the tire pressure monitoring switch until you hear a "dong" sound. The system will memorize the original tire pressure values of all four tires. Test whether the tire pressure monitoring function is successfully activated. The tire pressure monitoring indicator on the dashboard will light up, indicating that the tire pressure monitoring function has been successfully activated. If the tire pressure of multiple wheels changes, the tire pressure loss indicator in the combination instrument and infotainment system display will issue an alarm.
4
4
Share

What to Do When You Only Have 1 Point Left on Your Driver's License?

You can still drive with 11 points deducted from your license as long as all fines and penalties are paid, which does not affect your driving. During this scoring cycle, you must avoid any further point deductions. If you reach 12 points, you will need to retake the learning and examination process. Accumulating 12 points twice will require you to undergo a driving skills test. Passing the test will restore your points to 12. Alternatively, if you can hold out until the next scoring cycle when points are reset, your points will be restored to 12 again. Upon passing the test, the deducted points will be cleared, and your driver's license will be returned. If you fail the test, you must continue with the learning and examination process.
13
3
Share

What are the reversing tips for beginners?

When reversing for the first time, lean your body slightly to check the right rearview mirror and observe the positional relationship between the car body and the corner of the parking space in advance. Based on the view through the rearview mirror, predict whether the car body will be too close or too far from the corner of the parking space if it continues at this angle, then adjust the steering accordingly. After the rear half of the car enters the parking space, adjust the steering while observing the left and right rearview mirrors to determine which direction the front and rear of the car are tilting. Judge when to stop by observing the relationship between the left rearview mirror and the boundary line. When the left rearview mirror covers the boundary line, immediately press the clutch to stop.
3
5
Share

How to Shift to Neutral on a Motorcycle?

When starting, you need to slowly release the clutch while gradually increasing the throttle in coordination with the clutch. The main issue causing stalling is releasing the clutch too quickly. It requires practice to master. To shift to neutral when stopping, release the clutch and rock the bike back and forth to check if it's in first gear. If not, move the bike slightly forward or backward and then shift to neutral.
17
1
Share

What to Do When You Run Out of Gas on the Highway?

In case of an emergency, first dial 12122 to request assistance. If 12122 is not available in your area, you can also call 122 or 110. After parking your car, you can call your insurance company, inform them of your specific location, and be prepared to pay a certain fee. You can turn off some unnecessary electrical devices in the car, such as the air conditioning, and close the windows to reduce resistance while driving.
20
3
Share

How to Use the Car Cigarette Lighter?

First, insert the electronic cigarette lighter by gently pushing it in. After installation, press the cigarette lighter down, and the working light of the electronic cigarette lighter will illuminate. Wait for a while, as the cigarette lighter will automatically pop out slightly after heating. Then, use the cigarette lighter to light a cigarette or for other purposes by touching the front end of the lighter to the cigarette or object. Note: Remember to put it back after use and not leave it carelessly in the car. The head of the cigarette lighter remains very hot and improper placement may cause a fire.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.