What are the steps to replace the oil filter for the Golf 7?
2 Answers
The steps to replace the oil filter for the Golf 7 are as follows: 1. Remove the plastic film cover on the oil filter; then place the oil filter wrench over the head of the oil filter and rotate it to remove the oil filter. 2. To prevent oil spillage, the filter should be removed with the opening facing upward; install the new oil filter onto the engine by hand, screwing it in initially, and then giving it a final firm hand-tightening to complete the process. Additional information: During engine operation, metal particles, dust, oxidized carbon deposits and gummy deposits formed under high temperatures, water, and other contaminants continuously mix into the lubricating oil. The role of the oil filter is to remove these mechanical impurities and gum, maintaining the cleanliness of the lubricating oil and extending its service life. The oil filter should possess properties such as strong filtration capability, low flow resistance, and a long service life.
Changing the oil filter is something I help my friend with every week. It's simple but don't rush. First, prepare the tools: new filter, wrench, funnel, oil drain pan, and gloves. Park the Golf 7 on a level surface, engage the handbrake, and use a jack to lift the front wheels securely, supporting it to prevent tipping. Crawl under the car, locate the engine's drain plug, and unscrew it to let the old oil flow into the pan—avoid spilling it on the ground or your clothes. Once drained, twist off the old filter counterclockwise by hand, being careful of residual oil drips—it can get messy. Before installing the new filter, remember to apply a bit of new oil on the rubber ring for lubrication and sealing, then tighten it clockwise by hand without over-torquing with a wrench. After reinstalling, tighten the drain plug, then pour new oil into the engine through the filler opening under the hood, following the manual's specified amount. Start the car and let it run for two minutes, then crawl back underneath to check for leaks. Clean up the tools and dispose of the used oil at a recycling point—saving money and hassle. Don't skip regular maintenance.
