What are the steps to replace the battery of the Geely Emgrand GL electronic key?
2 Answers
When the remote control distance of the Geely Emgrand GL key is very short or cannot be controlled remotely, and the instrument shows a low battery alarm for the key, it is necessary to replace the battery. The steps to replace the battery are as follows: 1. First, press the round button on the car key to pop out the metal mechanical key; 2. After the mechanical key pops out, you can see the hidden part blocked by the metal key, and lift the car key cover along the gap; 3. Open the car key cover to see the inside of the battery, take out the old battery, and put in the new prepared battery; 4. Press the key cover back into place, and the battery replacement for the car key is completed. The operation is very simple.
Replacing the battery in my Geely Emgrand GL car key is actually quite simple. First, press the small button on the side of the key to eject the mechanical key, then use a plastic pry tool or your fingernail to gently pry open the shell along the seam. Be careful not to scratch the casing with metal tools. Once opened, you'll see the coin cell battery, typically a CR2032 model. When removing the old battery, remember the orientation of the positive and negative terminals, and ensure the new battery is installed with the positive side facing up. Gently press the shell back together until you hear the snap indicating it's securely closed. Finally, test the unlocking function to confirm it works properly. The whole process takes about five minutes, and the batteries are readily available at convenience stores or supermarkets. Remember to choose reputable brand batteries to avoid voltage instability affecting the key's lifespan.
