What are the steps to replace the air conditioning filter in the Lavida?

1 Answers
OZoey
07/30/25 6:02am
The steps to replace the air conditioning filter in the Lavida are: 1. Remove the black plastic panel above the footwell on the passenger side; 2. Disconnect the negative terminal of the battery, remove the body control module, and take off the bracket that secures the body control module; 3. Press the clips on both sides of the air conditioning filter and pull out the old filter; 4. Install the new air conditioning filter in place. The Lavida is a compact car produced by SAIC Volkswagen. Taking the Lavida 2021 280TSI DSG Comfort Edition as an example, its body dimensions are: length 4670 mm, width 1806 mm, height 1474 mm. The Lavida 2021 280TSI DSG Comfort Edition is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission.
Was this review help?
20
0
Share
More Forum Discussions

Where is the Proper Position for the Steering Wheel?

The proper position for the steering wheel is in the middle directly below the car's dashboard. Correctly holding the steering wheel is crucial for smooth and safe driving. Before driving, ensure you sit upright and adjust the car seat to achieve the best visibility, guaranteeing clear sight for the driver. You should grip the steering wheel at the 9 o'clock and 3 o'clock positions. When driving straight, keep both hands firmly on the wheel and make adjustments based on road conditions to maintain a straight path. Use both hands evenly when correcting the steering direction. During turns, if turning left, apply force with your left hand while the right hand assists; when straightening, use the right hand with the left assisting. Conversely, for right turns, use the right hand with the left assisting, and straighten with the left hand while the right assists. Always check the rearview mirrors during turns, as they provide additional support. Whether turning or making a U-turn, control the steering wheel's force carefully—avoid turning it all the way at once to prevent damage.
12
0
Share

Which manufacturer produces Li Auto?

Li Xiang One is a product of Li Auto (formerly known as CHJ Automotive), founded by Li Xiang, the founder of Autohome. Its production facility is located in Changzhou, Jiangsu Province, and is manufactured by Lifan Motors Co., Ltd. Changzhou Branch. Here is some relevant information about Li Xiang One: 1. Li Xiang One is a domestically produced new energy vehicle. As an extended-range electric vehicle, it operates with zero emissions when driving short distances on pure electric power. When the battery level drops below a set threshold, a 1.2T engine starts to generate electricity to power the vehicle. 2. The Li Xiang One has a battery capacity of 40.5 kWh, with 37.2 kWh usable. On a full charge, it can achieve an extended range of over 520 km, a combined range of 700 km under standard driving conditions, and over 1,000 km in urban driving conditions.
17
5
Share

How far can a BMW run-flat tire go after losing air?

BMW run-flat tires can still run 80 kilometers after losing air. Relevant introductions are as follows: 1. In the case of tire deflation, the vehicle can still travel 80 kilometers at a speed of 80 km/h; If the driver has no experience in driving after a flat tire, he may make wrong driving actions (such as emergency braking), which will lead to uncontrollable loss of control of the vehicle; 2. Flat tire is a very serious safety accident, especially on the highway. According to statistics, 70% of accidental traffic accidents on domestic highways are caused by flat tires, and the mortality rate of flat tires at speeds above 160 km/h is close to 100%; 3. Equipping the vehicle with "run-flat tires" solves the safety problem to the greatest extent. The real "run-flat tires" are military 6×6, 8×6 and other tire off-road armored vehicles. Their tires are designed with special metal strips, which can keep the tires from deformation even if they are penetrated by artillery shells and continue to move forward.
20
1
Share

How Often Should Polishing and Waxing Be Done?

Polishing and waxing should be done every 3 to 6 months. Both polishing and waxing can maintain the car's appearance and repair minor scratches. Very light scratches, such as those as fine as a hair strand, can be removed by waxing. For relatively more severe scratches, polishing is required to eliminate them. Waxing serves as a polishing agent; when minor scratches appear on the car, sand wax can be used to grind and remove them. Sand wax contains special abrasive particles that can easily and safely remove the oxidized film, fine scratches, stains, and stubborn dirt on the car's surface, restoring the original dazzling luster and long-lasting beauty to aged, faded, or dull paint. Polishing is a consumable repair method; minor scratches can be fixed through polishing. By rotating the polishing pad to grind away the oxidized layer, scratches, and stains on the car's paint surface, the paint can regain its smooth and shiny appearance. A small amount of polishing is acceptable, and the car's paint can withstand it.
17
5
Share

Which company produces Landwind cars?

Landwind cars are produced by Landwind Automotive Group, which is jointly controlled by Chongqing Changan Automobile Co., Ltd. and Jiangling Motors Group Co., Ltd. The headquarters of automobile production is located in Nanchang, Jiangxi. Landwind is a Chinese independent automobile brand, mainly producing SUV models. Currently, Landwind's models on sale include Landwind X2, Landwind Rongyao, Landwind X8, Landwind X5, and Landwind Xiaoyao. Taking the Landwind X2 as an example, it is positioned as an SUV model. In terms of body dimensions: The Landwind X2 has a length, width, and height of 4160mm, 1810mm, and 1670mm respectively, with a wheelbase of 2560mm. In terms of appearance: The front face of the Landwind X2 features distinctive irregular chrome decorations, combined with LED daytime running lights, creating a simple and robust effect.
5
3
Share

What kind of engine oil does Mustang use?

Turbine engines use full synthetic oil with a viscosity of 40, while naturally aspirated engines use full synthetic oil with a viscosity of 60. The Mustang is equipped with two types of engines: one is a 2.3-liter turbocharged engine, and the other is a 5.0-liter V8 naturally aspirated engine. Here are the details: 1. Because the V8 engine generates more heat and operates at higher speeds, it requires oil with higher viscosity. During normal engine operation, the oil forms a film on the surface of various engine components, preventing direct contact and friction between them. 2. The viscosity of the oil should not be too high or too low. If the viscosity is too low, the oil cannot form a stable film on the surfaces of the engine components, which will increase engine wear. If the viscosity is too high, it will increase the resistance during engine operation, affecting the engine's power output and fuel economy.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.