What are the steps to remove the dashboard of a Volkswagen Polo?

1 Answers
MaverickLee
07/29/25 1:59pm
Pry off the black trim frame around the head unit, being careful not to use excessive force to avoid breaking the frame. Remove the fixing screws around the head unit, taking care not to drop the screws into the gaps of the center console. Disconnect the wiring harness at the back. Connect the wiring harness of the head unit to the new head unit. These are specialized connectors, so there's no need to worry about incorrect connections. After installing the new head unit, power it on for testing. Once the test is successful, tighten the screws to secure it, and finally reattach the black trim frame.
Was this review help?
15
5
Share
More Forum Discussions

Where is the USB port located in the XC60?

The USB port in the XC60 is located towards the rear inside the center armrest. Additional information about car USB drives is as follows: 1. Required format: The car USB drive needs to be formatted in the FAT32 file system. While computers may support other formats, external devices in cars only support the FAT32 file system. 2. FAT format: Car USB drives are related to format (both USB format and music format). Format the USB drive to FAT format, then try putting different music formats (MP3 format is universally supported).
6
2
Share

What is the appropriate tire pressure setting for a car?

It is appropriate to set the car tire pressure between 240 to 250kpa. Tire pressure refers to the air pressure inside the tire, and the level of tire pressure plays a significant role in the performance and power of the car. The effects of overinflated tires are: 1. Reduced friction and adhesion, affecting braking performance; 2. Causing steering wheel vibration and deviation, reducing driving comfort; 3. Accelerating wear on the central tread pattern, shortening the tire's lifespan. The effects of underinflated tires are: 1. Increased friction coefficient with the road surface; 2. Making the steering wheel heavy and prone to deviation; 3. Increased movement of various parts of the tire, leading to abnormal heating due to excessive rolling.
19
0
Share

What Causes Jerking When Accelerating or Decelerating?

Manual transmission jerking when releasing the throttle can be caused by transmission gear programming settings, transmission cooling issues, and other faults. Additional information is as follows: 1. Introduction: The throttle, also known as the "accelerator" or "butterfly valve," refers to the control device that regulates engine power (thrust). In piston aircraft engines, the throttle controls the carburetor's butterfly valve opening to regulate cylinder filling, thereby determining engine output. 2. Overview: The throttle pedal, or accelerator pedal, is part of the vehicle's fuel supply system. By controlling its depression amount, it regulates the engine throttle valve opening, controls air intake, allows the computer to manage fuel injection, and ultimately governs engine speed.
6
4
Share

Is the Sylphy a Honda or Toyota?

Neither, the Sylphy belongs to Nissan. Below is a related introduction to the Sylphy: 1. Powertrain: It is equipped with a 1.6L naturally aspirated engine that complies with the China VI emission standards, delivering a maximum power of 99kW (135 horsepower) and a peak torque of 159Nm. The transmission system is paired with a CVT gearbox. 2. Features: The new car comes with the latest NissanConnect intelligent connectivity system, featuring an 8-inch high-definition capacitive touchscreen that includes functions such as voice control for the vehicle and remote vehicle control. The voice control system allows basic operations of the vehicle's online entertainment system, real-time navigation, Bluetooth calls, driving recorder, and air conditioning through simple voice commands.
4
5
Share

What is the fault when the BMW 5 Series has hard brakes and no power assistance?

The cause of the fault is air leakage or failure of the vacuum booster pump. The following is an introduction to the brake booster pump: 1. Principle: During the braking process, the vacuum entering the booster pump is controlled to move the diaphragm, and through the linkage device, the push rod on the diaphragm is used to assist human force in stepping on and pushing the brake pedal, thereby amplifying the force exerted by the driver on the pedal. 2. Function: Utilizing the principle of air intake during engine operation, a vacuum is created on one side of the booster pump, forming a pressure difference relative to the normal air pressure on the other side. This pressure difference is used to enhance the braking thrust.
3
3
Share

Why does the Jetta EPC light come on with loss of power when accelerating?

There are mainly three reasons for the Jetta's EPC light coming on with loss of power during acceleration. They are: First reason: Throttle body is too dirty. Second reason: There is a leak in the intake system. Third reason: There is a leak in the crankcase ventilation system. The main solutions for the EPC light coming on are the following four: 1. Troubleshoot intake system faults, use fuel that meets standards, and clean the throttle body. 2. Remove carbon deposits from related parts. 3. Rewrite the relevant ECU data. 4. The possibility of other faults cannot be ruled out; specific diagnosis should be based on reading fault codes.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.