What are the steps to remove a car's interior headliner?

Can I Cancel My Subject Two Registration?

Subject Two registration can be canceled, but it must be done one day in advance. Notes for canceling registration and examination: 1. Please carefully read the instructions before applying to cancel the scheduled examination to understand the relevant requirements for canceling the examination online; 2. If the cancellation is successful, the examination slot will no longer be reserved, and you will need to re-register for the examination to participate; 3. If the cancellation fails, you must bring valid identification to attend the examination at the scheduled time and location. Failure to attend on time will result in a failing grade for this examination. The driver's license examination is a qualification test organized by the Vehicle Management Office of the Public Security Bureau. Only by passing the driver's test can you obtain a driver's license and legally operate a motor vehicle.

11

4

Share

How often should a sedan be serviced?

Sedans should be serviced every 5,000 kilometers. For minor maintenance, the oil filter and engine oil are replaced. During major maintenance, the three filters are replaced: the fuel filter, air filter, oil filter, and engine oil. Depending on the vehicle's condition, the maintenance personnel may also recommend replacing the spark plugs (after driving more than 30,000 kilometers) and brake fluid (after driving more than 40,000 kilometers). Maintenance precautions include: 1. When driving on the highway and approaching a toll station or rest area, there will be a series of speed bumps on the ground. Before reaching the speed bumps, slow down to reduce tire wear; 2. Due to bumps and vibrations during driving, some parts may loosen. Drive the vehicle to a repair shop for tightening.

10

1

Share

How to Turn Off the Auto Start-Stop Function in Volvo S90?

To turn off the auto start-stop function in Volvo S90: There is an auto start-stop button below the center console, which is enabled by default. Press it once to turn it off, and press it again to turn it on. Please note: The auto start-stop function will be enabled by default again the next time you start the car. The Volvo S90 is a luxury sedan under the Volvo brand, available in five models: T4 Momentum, T4 Inscription, T5 Inscription, T5 R-Design, and T5 Excellence. The dimensions of the Volvo S90 are 5083mm in length, 1879mm in width, and 1450mm in height, with a wheelbase of 3061mm. In terms of power, the Volvo S90 is equipped with a 2.0T engine, integrated with a reversible electric motor (ISG) as part of Volvo's 48V mild hybrid system, and paired with an 8AT transmission.

18

2

Share

Is it necessary to install a parking sensor if a reversing camera is already installed?

It is possible to install a parking sensor alongside a reversing camera, as both are parking assistance devices. The parking sensor can alert the driver about surrounding obstacles through sound or more intuitive displays, while the reversing camera provides a comprehensive real-time view of the rear situation. For drivers who are less experienced, installing both can be considered. The reversing camera, also known as a parking assistance system, reversing visual system, or onboard monitoring system, is widely used in various large, medium, and small vehicles for reversing or driving safety assistance. It provides clear visibility even at night through infrared technology. The onboard probe is resistant to magnetism, shock, water, and dust. The onboard display uses TFT true color, is magnetically treated to prevent signal interference and flickering, can receive two video signals simultaneously, and is capable of playing VCD and DVD without the need for a decoder.

9

1

Share

How to Use Engine Start-Stop Technology and Auto Hold?

When using both the engine start-stop technology and auto hold functions together, pressing the brake pedal firmly will turn off the engine and engage the parking brake. Releasing the brake pedal will maintain this state. To start moving, lightly press the accelerator pedal, which will release the parking state and restart the engine. Then, pressing the accelerator pedal again allows the vehicle to drive. Engine start-stop technology is a system that automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a red light) during driving and automatically restarts the engine when it's time to move forward. The working principle of the start-stop system is: when the vehicle stops due to traffic congestion or at an intersection, and the driver presses the brake pedal to stop and shift to neutral, the system automatically checks: the engine is idling and not in gear; the wheel speed sensors of the anti-lock system show zero; the electronic battery sensor indicates sufficient energy for the next start. When these three conditions are met, the engine automatically stops turning. Auto hold refers to an automatic braking function. After activating this function, for example, when stopping at a red light, it eliminates the need to use the handbrake or electronic parking brake, simplifying operations. For automatic transmission models, it also avoids frequent shifting between D to N or D to P.

13

5

Share

What is the Difference Between Continuously Variable Transmission and Automatic Transmission?

Continuously Variable Transmission and Automatic Transmission differ in their nature: Continuously Variable Transmission, as the name suggests, is a transmission without fixed gear ratios, meaning it has no distinct gear positions. For example, electric motors utilize Continuously Variable Transmission. On the other hand, Automatic Transmission operates with each gear controlled by a set of clutch plates to achieve gear shifting. Automatic transmissions use solenoid valves to control these clutch plates, making the system simpler and more reliable. The transmission primarily refers to the vehicle's gearbox, which is divided into manual and automatic types. Manual transmissions mainly consist of gears and shafts, achieving speed and torque changes through different gear combinations. Automatic Transmission (AT) is composed of a torque converter, planetary gears, a hydraulic torque conversion system, and a hydraulic control system, achieving speed and torque changes through hydraulic power transmission and gear combinations.

13

5

Share

What are the steps to remove a car's interior headliner?

Can I Cancel My Subject Two Registration?

How often should a sedan be serviced?

How to Turn Off the Auto Start-Stop Function in Volvo S90?

Is it necessary to install a parking sensor if a reversing camera is already installed?

How to Use Engine Start-Stop Technology and Auto Hold?

What is the Difference Between Continuously Variable Transmission and Automatic Transmission?

What procedures are required for buying a car and obtaining a license plate?

What are the reasons for feeling the car battery is dead when starting the engine?

How to open the front hood of Haval H6?

What is the installation method for car rain deflectors?