What are the steps to lift up the Lexus wiper?

1 Answers
Tiffany
07/29/25 9:37pm
Move the vehicle's wiper combination switch back to the off position to turn off the rear wiper function. Once the wiper stops moving, lift the wiper arm forward to raise the wiper upright.
Was this review help?
4
5
Share
More Forum Discussions

How much 92 gasoline is needed for 160 kilometers?

Previously using 92 gasoline and now switching to 95 gasoline is not a problem, but you need to wait until the fuel in the tank is nearly depleted before refilling with 95 gasoline. There are regulations regarding the minimum grade of fuel that can be added to a car. For example, switching from 92 to 95 is acceptable, but if the regulation specifies 95 gasoline as the minimum grade, then 92 gasoline cannot be used. Below are the differences between 95 gasoline and 92 gasoline: Difference in octane rating composition: 92 gasoline consists of 92% isooctane and 8% n-heptane; 95 gasoline consists of 95% isooctane and 5% n-heptane. Difference in applicable compression ratios: 92 gasoline is suitable for engines with a compression ratio between 8.6 and 9.9; 95 gasoline is suitable for engines with a compression ratio between 10.0 and 11.5. Difference in gasoline's anti-knock properties: 92 gasoline has poorer anti-knock properties, requiring the ignition timing to be delayed, which leads to faster fuel consumption in the car. On the other hand, 95 gasoline's strong anti-knock properties result in slower fuel consumption.
11
3
Share

What is the process for handling new car purchases?

The process is as follows: 1. Purchase insurance: This requires providing the new car's certificate of conformity and the owner's ID card (for organizations, the organization code certificate and official seal are required) to handle insurance. 2. Pay vehicle purchase tax: Each location has designated places for paying vehicle purchase tax (this step can also be completed at the vehicle management office). If a location does not have this service, you need to go to the tax bureau with all necessary documents (certificate of conformity, invoice, owner's ID card, etc.) to pay the tax. After payment, you will receive the original and duplicate copies of the vehicle purchase tax payment certificate, one of which must be submitted to the vehicle management office during license plate registration. 3. Submit documents: Go to the vehicle management office and submit the documents at the motor vehicle information entry window, take photos, sign, and then drive the car to the inspection area after completing the process. Specialized personnel will inspect the vehicle, take photos, and help with the vehicle identification number (VIN) rubbing. This step mainly involves checking the vehicle's appearance, vehicle identification code, warning signs, etc. 4. Get a number: After the vehicle inspection is completed, park the car and return to the hall to submit documents and wait for processing. After submitting the documents, follow the window signs to the license plate selection window to choose a number, and then proceed to the payment window to pay the fees after selecting and confirming the license plate. 5. Pay fees: After paying the fees, wait for the production of the vehicle registration certificate, driving license, and license plate. Generally, once the driving license is issued, check the screen for results and go to the license plate collection point to collect the plate, then proceed to the license plate installation area to complete the installation.
6
5
Share

What is the penalty for driving a yellow-plate vehicle with a C-class license?

Driving a yellow-plate vehicle other than small low-speed trucks, according to the first provision of the reply from the Legislative Affairs Office of the State Council on the "Understanding and Application of Certain Legal Provisions in the 'Road Traffic Safety Law of the People's Republic of China' and Its Implementation Regulations," will result in a one-time deduction of 12 points, a fine ranging from 200 to 2,000 yuan, and may also include detention for up to 15 days. The "Scoring Standards for Road Traffic Safety Violations" stipulates that motor vehicle drivers committing any of the following violations will be penalized with a one-time deduction of 12 points. Driving a motor vehicle that does not match the permitted vehicle type on the driver's license. Driving under the influence of alcohol. Obstructing or failing to display a license plate. Exceeding the speed limit by 50%. According to the "Operational Standards for Motor Vehicle Driver's License Services" issued by the relevant authorities, motor vehicle driver's licenses are categorized into a hierarchical system, dividing them into 15 levels: A1, A2, A3, B1, B2, C1, C2, C3, C4, D, E, F, M, N, and P. The permitted vehicle types for each license level are as follows: A1 license permits driving large passenger vehicles; A2 license permits driving tractors, heavy and medium-sized full trailers, and semi-trailer combinations; A3 license permits driving city buses with a capacity of 10 or more passengers; B1 license permits driving heavy passenger vehicles; B2 license permits driving heavy and medium-sized trucks, etc.; C2 license permits driving small and micro automatic transmission passenger vehicles, etc.; C3 license permits driving low-speed trucks (originally four-wheel agricultural transport vehicles); C4 license permits driving three-wheeled vehicles (originally three-wheel agricultural transport vehicles); D-type license permits driving three-wheeled motorcycles with an engine displacement exceeding 50ml; E-type license permits driving two-wheeled motorcycles with an engine displacement exceeding 50ml; M-type license permits driving wheeled self-propelled machinery; N-type license permits driving trolleybuses; P-type license permits driving trams. According to the relevant legal provisions of the "Road Traffic Safety Law": Article 19: Driving a motor vehicle requires legally obtaining a motor vehicle driver's license. Applying for a motor vehicle driver's license must meet the driving permit conditions stipulated by the public security department of the State Council; upon passing the examination, the traffic management department of the public security authority will issue the corresponding category of motor vehicle driver's license; drivers must operate motor vehicles according to the permitted vehicle types specified on their driver's license; when driving a motor vehicle, the driver must carry the motor vehicle driver's license. Therefore, it should be clear that both driving a motor vehicle without a driver's license and driving a motor vehicle that does not match the permitted vehicle type on the license are illegal acts.
18
3
Share

What is the 3TZ engine?

3TZ engine is a gasoline engine. Here is more information about automotive engines: 1. Introduction: The automotive engine is the power-generating device for a vehicle, serving as its heart that determines the vehicle's power performance, fuel economy, stability, and environmental friendliness. Depending on the power source, automotive engines can be categorized into diesel engines, gasoline engines, electric motors for electric vehicles, and hybrid systems, among others. 2. Power performance indicators: These are metrics that represent the engine's capability to perform work, typically evaluated using effective torque, effective power, and engine speed as key parameters.
18
0
Share

What is the reason why the clutch cannot be depressed but returns to normal after a few minutes?

The vehicle's clutch slave cylinder or assembly may be malfunctioning. When the clutch pedal cannot be depressed, do not force it down as this may cause the clutch master cylinder to leak oil, thereby increasing repair costs. Here is additional information: Clutch: The clutch is installed between the engine and the transmission. It is frequently used throughout the process from starting to driving the vehicle. Its function is to allow gradual engagement between the engine and the transmission, ensuring smooth vehicle starts, and to temporarily disconnect the connection between the engine and the transmission to facilitate gear shifting and reduce impact during gear changes.
20
0
Share

How many seconds does it take for a car to travel 100 meters?

100-meter acceleration is a test of a car's engine power. Generally, it takes about 8 seconds for an average car to cover 100 meters, while a supercar might only need 3 seconds. The maximum speed refers to the highest speed a car can achieve on a well-paved road (concrete or asphalt) under windless conditions, where the driving resistance and driving force are balanced. It is one of the three evaluation indicators of a car's dynamic performance. Here are additional details: influencing factors: multiple factors affect a car's maximum speed, such as the engine's power, maximum torque, RPM at maximum torque, transmission ratio, and driving resistance.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.