···
Log in / Register

What are the steps to fold down the rear seats of the Geely Vision X6?

3 Answers
DiLily
09/07/25 7:05am
Open the car door and locate the release buckles on the back of the rear seats, usually positioned at the shoulder area of the seats. Each rear seat position will have a release handle. After finding the release handle, choose the proportion in which you want to fold down the seat—either fully or halfway—adjusting according to your needs. Fold the seat forward to lay it flat, noting that the seat should be folded forward. Under the headrests on both sides of the rear seats, there is a switch. Press the switch and push the seat forward.
Was this review help?
15
5
Share
VonNorah
09/19/25 6:14am
I've been driving the Vision X6 for a long time, and folding down the rear seats is super practical. First, park the car on a safe and level ground, and engage the handbrake. Then, crouch into the rear seats and locate the pull straps at the bottom edge of the seats, usually on both sides. Gently pull the handle to unlock the seat, then push it forward or lay it flat—avoid doing it too forcefully to prevent scratching the interior. Once folded down, the space becomes enormous, perfect for camping gear or suitcases. Remember to clear any items from the seats before folding them down, or you might lose things in the gaps. If the pull strap feels stiff, it might be due to dust or a jam—just give it a light sweep. Regularly lubricate the latches to prolong their lifespan. After folding, ensure the seats are securely locked in place to prevent shifting while driving. The whole process takes just a minute—safe and convenient for daily trips. The Vision's design is quite user-friendly. Just make sure to fasten the seats tightly when resetting them.
Was this review help?
14
1
Share
Expand All
MaverickDella
11/02/25 6:37am
As a young person, I absolutely love the flexible space in the Geely Vision X6. After parking and pulling the handbrake, just reach under the rear seats to find the small pull rings. Give them a firm tug to unlock, and the seats will flip forward to lie flat—usually operated separately left and right with a 40/60 split-folding ratio. Once flattened, it's perfect for skis or shopping bags. Pro tip: Have a friend help stabilize the seats while operating to avoid damage. Clearing out clutter beforehand ensures better results and prevents crushing items. If the pull rings are worn and hard to use, replace them promptly. Practical advice: Add a trunk mat for protection after folding, and clean the track dust regularly to prolong lifespan. This feature in the Vision is simple yet highly functional, making weekend trips a breeze. Don’t forget to check the locking mechanism to prevent rattles. The whole process is lightning-fast, significantly enhancing the driving experience.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

What does the serial number for the driver's license examination mean?

When logging into the online vehicle management office to check personal examination services, you will be prompted to use either your ID number or the serial number. If you select the ID number, detailed information will be displayed after logging in. Below is a detailed introduction: 1. Driver's License: Abbreviated as driving permit or driver's license, commonly referred to as a car permit or license plate, it is a document issued by the government's transportation department to individuals who qualify to drive. The driver's license typically specifies the types of motor vehicles the holder is permitted to drive, such as motorcycles, small passenger cars, etc. To obtain a driver's license, one must meet the minimum age requirement and pass the driving test. Different countries have varying standards for the minimum age required to apply for a driver's license. 2. Examination Content: The test subjects include traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving), totaling three items.
14
4
Share

Why is there no sound from the windshield washer motor?

The reasons why there is no sound from the windshield washer motor are: 1. The windshield washer fluid is frozen due to insufficient freezing point; 2. The fuse of the windshield washer motor is damaged; 3. There is an issue with the related wiring of the windshield washer motor; 4. The windshield washer motor itself is damaged. The functions of windshield washer fluid are: 1. Used for cleaning the windshield to maintain clear visibility; 2. It has anti-freeze and anti-fog properties; 3. It has anti-static, lubricating, and anti-corrosion effects. The method for adding windshield washer fluid is: 1. Open the hood and locate the windshield washer fluid filler port; 2. Open the cap and pour the windshield washer fluid into the container; 3. Observe the fluid level until it reaches the marked line. The characteristics of automotive windshield washer fluid are: 1. It has a cleaning effect; 2. Anti-freeze performance; 3. Anti-fog performance.
5
1
Share

What are the symptoms of shock absorber oil leakage?

When shock absorber oil leakage occurs, it needs to be repaired promptly. The following is a detailed introduction to the symptoms of this situation: 1. Shock absorber oil leakage: The outer surface of a normal shock absorber is dry and clean. If there is oil leakage, it means that the hydraulic oil inside the shock absorber has escaped from the upper part of the piston rod, and the shock absorber is basically ineffective in this case. 2. Wheel noise: When the car passes over bumpy roads or speed bumps, a certain wheel makes a "clunking" sound, indicating that the shock absorber on this wheel has poor damping effect or is ineffective. 3. Increased body roll: When the car is cornering, it is obvious that the body roll increases, and in severe cases, even side slip may occur. This is mainly because the damping force of the shock absorber is too small to effectively suppress the compression of the spring. 4. Cold shock absorber shell: After driving on rough road conditions for a period of time, touch the shell of each shock absorber with your hand to feel the temperature. Normally, the shell of the shock absorber should be warm. If the shell of a certain shock absorber is cold, it means that this shock absorber is damaged.
7
3
Share

What Type of Engine Oil Does Wuling Zhiguang Use?

Wuling Zhiguang uses engine oil with the specification 5W-30. For vehicles within the warranty period, it is recommended to choose the engine oil provided by the 4S store. If the warranty period has expired, you can continue to use the original oil type. Methods for Choosing Car Engine Oil: Selection of Oil Grade: This is the first step in choosing car engine oil. If the oil grade is not selected properly, abnormal phenomena may occur during use, and it may even cause abnormal wear. The higher the effective pressure of the engine cylinder and the higher the engine speed, the higher the requirement for the oil grade. When choosing car engine oil, you can refer to the vehicle's user manual. If the same grade of oil is not available, you can choose a higher grade. Selection of Viscosity: The viscosity of car engine oil should be selected based on the driving environment. Multi-grade oil suitable for both winter and summer can be chosen, which helps the owner save fuel. For regions with relatively stable temperatures, such as southern areas, the viscosity of the oil should be as low as possible while ensuring normal engine lubrication.
3
1
Share

What is the Appropriate Tire Pressure for Cars in Cold Weather?

In winter, the most suitable tire pressure for cars is between 2.5 and 2.8 pa. Due to thermal contraction and expansion, it is generally advisable to slightly increase tire pressure during cold weather. Steps to Increase Tire Pressure: When inflating tires, choose a time when the tires have completely cooled down after the vehicle has been parked. Avoid inflating immediately after driving, as the friction from rolling generates heat, raising tire temperature and internal pressure, which can affect the accuracy of inflation. Before inflating, clean any dirt or dust from the valve stem. Try not to loosen or remove the valve core during inflation, and avoid forcing air in by increasing pressure excessively to prevent the valve from loosening and leaking. After inflation, apply water to the valve stem to check for leaks, tightening or replacing the valve core if necessary. Always replace the valve cap securely to prevent dirt from entering the valve. Monitor the pressure gauge on the air pump closely and inflate strictly according to the standard tire pressure values. If overinflated, release some air. The VICTRONIC T800 portable air compressor not only features a built-in light and pressure gauge for quick inflation, easy portability, and storage, but also includes a tire pressure monitoring function for regular checks and timely inflation when pressure is low.
5
3
Share

What are the symptoms of a faulty CVT transmission valve body?

Occasionally during driving, symptoms may include lack of acceleration, illuminated engine warning light, slow crawling, shaking, slippage within 100 kilometers of continuous driving, and engine idling. Here are some relevant recommendations: Regular maintenance: Based on our extensive case analysis of CVT transmission repairs, the common failure points are concentrated in the valve body, chain, and sprocket damage. It is particularly noteworthy that many initial issues with this type of transmission will trigger the engine warning light, yet there may be no noticeable abnormalities while driving. This situation is often the most easily overlooked by vehicle owners. Early inspection can prevent further damage. This cylinder-block working structure transmission has higher requirements for oil quality, making timely maintenance very important.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.