What are the steps to drive a Teana automatic transmission car?

1 Answers
MacRyder
07/29/25 4:48pm
Before starting the car, familiarize yourself with the functions of the buttons in the car, which are all introduced in the manual. They are mainly divided into steering wheel function buttons and the positions of the brake and accelerator at the bottom. First, press the one-touch start button marked with the letter 'start', located at the upper left corner of the gear shift. Pressing the start button once activates ACC, and pressing it twice turns on all dashboard indicator lights. After ensuring the car is in good condition, use your right foot to press the brake, then press the one-touch start button to ignite and start the car. Continue to press the brake with your foot and shift the gear to D. Press down the (P) button for the electronic handbrake, slowly release the foot brake with your right foot, and the car will start moving forward. Press the accelerator on the right side with your right foot to accelerate the car.
Was this review help?
12
2
Share
More Forum Discussions

What is the fuel tank capacity of the Ninja?

The fuel tank capacity of the Ninja is 17 liters. Methods to determine fuel level on motorcycles: Check the motorcycle's fuel gauge, where 'F' represents a full tank, and 'E' in the direction of the red mark indicates low fuel. However, when the fuel gauge needle points to the red mark near 'E', there is still approximately one-third to one-quarter of the total fuel capacity remaining in the tank. At this point, the remaining fuel is sufficient to travel at least several dozen kilometers, and you should refuel promptly. For cross-type motorcycles, you can also rely on the fuel tank switch. After filling up, set the switch to the main tank. When the main tank runs out of fuel, switch to the reserve tank, which contains about two liters of gasoline, enough for several dozen kilometers. Then refuel and switch back to the main tank after filling up. Examples of fuel tank capacities for other models: The Kawasaki 400 has a 14L tank, and the ZX-10R has a 17L tank.
2
3
Share

Does sand entering the engine compartment have any impact?

Sand entering the engine compartment does have an impact, and it is recommended to address it as soon as possible. Methods for cleaning sand from the engine compartment: Remove the engine cover and clean the oil sludge and dirt on the engine cover. Clean the sludge on the external parts of the engine, pipes, and other areas, preferably using professional cleaning agents. Find a suitable small brush to scrub away the sludge. You can use a piece of chamois or a highly absorbent cloth to carefully wipe the internal components of the engine compartment. After cleaning, let the engine idle for a while to allow the moisture to evaporate. Methods for inspecting the engine compartment: After opening the engine hood, carefully check whether the wiring in the engine compartment is neat and orderly, whether there are any signs of disassembly on the components, and whether there are any oil stains on the terminal posts. Check whether the upper edge of the engine hood is smooth. There are some single-plate holes on the engine cover, so be sure to check for any deformation. If there is deformation, it definitely indicates that there has been reshaping and painting.
11
0
Share

How many kilometers is the lifespan of Neptune?

Engine lifespan is 100,000 kilometers. Below are the specific details regarding the relevant content: Introduction to Neptune: Generally, the service life of domestic motorcycles is 50,000-100,000 kilometers, while that of imported motorcycles is 200,000 kilometers. Neptune is a scooter motorcycle, and the fuel consumption of scooters is higher than that of regular motorcycles. However, in actual driving conditions, factors such as the rider's driving habits, road conditions, and motorcycle load can cause some variations in fuel consumption. Proper maintenance and care can extend the motorcycle's service life and maximize its performance. Maintenance and Care: The oil change interval for motorcycles is 3,000 kilometers. It is recommended to change the oil approximately every 3,000 kilometers. When refueling, try to use reputable gas stations and opt for 93-octane gasoline with carbon deposit removal additives. Since motorcycles use chains, it's important to regularly check the chain's condition and lubricate it periodically. Avoid parking the motorcycle outdoors as prolonged exposure to strong sunlight and external air can significantly affect the plastic body. The engine maintenance interval is 6,000 kilometers. When changing the oil, adding an appropriate amount of break-in additive can help ensure the engine's service life and performance.
9
1
Share

Do I Need to Repaint When Replacing the Rearview Mirror at a 4S Shop?

Replacing the rearview mirror at a 4S shop does not require repainting. Reasons why repainting is unnecessary when replacing the rearview mirror at a 4S shop: The rearview mirror comes with its own finish. If the requirements are not high, repainting is not necessary. The car's rearview mirrors are located on the left and right sides of the front of the car, as well as inside the front of the car. If the rearview mirror is broken, it will seriously affect the driving safety of the owner and should be replaced promptly. Even if the color of the replaced rearview mirror matches, there will still be a color difference. Precautions when replacing the rearview mirror: When installing the rearview mirror, pay attention to the installation sequence of the clips. First, place the top clip into position, and then install the clips on both sides, followed by the bottom clip in order. A little force is needed during the process. When you hear a "click" sound, it means the clip is in place. Products with good molds can easily install the mirror in place, and the entire process takes about 10 minutes.
11
4
Share

Why is there no response after connecting the battery to the motorcycle?

There may be no response after connecting the battery to the motorcycle due to a dead battery or a circuit fault between the battery and the starter. Reasons for no response after connecting the battery to the motorcycle: No response after connecting the battery may be caused by a dead battery or a circuit fault between the battery and the starter. In such cases, it is recommended to test the battery first. If the battery has power, then the issue lies in the circuit. Circuit problems are relatively simple to fix. When starting the motorcycle engine, the starter needs to work, the ignition system needs to function, and the fuel supply system also requires power. All these depend on electricity. Therefore, if the battery is dead, the engine cannot start, which is normal. If the generator is damaged, the motorcycle will continuously draw power from the battery. Once the battery is depleted, the motorcycle engine will stop running. Measures to take when there is no response after connecting the battery to the motorcycle: Check whether the battery cables are incorrectly connected or have poor contact, whether the fuse is blown or has poor contact, whether the ignition switch is faulty, whether there are open or short circuits in the vehicle wiring harness, or whether the battery itself is faulty and has no power. Any of these situations could be the cause.
19
1
Share

Can I Change the Rims Without Changing the Tires?

Changing the rims without changing the tires is possible. Conditions for changing the rims without changing the tires: As long as the rim size remains the same, it can be done. However, switching to wider tires may slightly increase fuel consumption, but there are also advantages, such as improved performance and a corresponding reduction in braking distance. Other considerations when changing rims: Generally, when changing rims, the tire width can be increased (or decreased) by 1-2 levels. For example, if the original tire width is 215, it can be directly changed to 220 or up to 225. If changed to 235, there may be safety hazards, especially during emergency braking, as it could cause the tire to dislodge. A 60-degree angle can be changed to 65 degrees, but the suspension travel should be considered to check if there is any possibility of the tire rubbing against the fender after the change. This is particularly important when increasing the tire width simultaneously. Additionally, increasing the tire width will raise fuel consumption and add resistance to the control system. Increasing the width will also raise the vehicle speed, so if the engine does not have surplus power, it is recommended to avoid excessive widening or heightening.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.