What are the steps to disassemble the Baojun 560 dashboard panel?
2 Answers
The steps to disassemble the Baojun 560 dashboard panel are: First remove the air conditioning control module, then use a plastic pry tool to loosen the upper cover panel of the center console, remove the upper cover panel of the center console, then use the plastic pry tool to remove the air vents on the center console, and finally take out the air vents. This completes the disassembly of the entire center console panel. The Baojun 560 is the first SUV model officially launched by SAIC-GM-Wuling, available in three variants: 1.8L manual comfort, 1.8L manual elite, and 1.8L manual luxury. In terms of body dimensions, the Baojun 560 measures 4620mm in length, 1820mm in width, and 1750mm in height.
I just disassembled the Baojun 560's center console panel a couple of days ago, and it was quite interesting. The tools needed are simple: a Phillips screwdriver and a plastic pry bar—avoid using metal ones to prevent scratches. The first step is to disconnect the negative battery terminal to avoid short-circuiting and damaging electrical components. Then locate the fastening points around the panel—usually screws under the dashboard or near the cup holders—unscrew them and set them aside. Next, gently pry the panel from the edges using the pry bar, taking it slow because the clips are fragile and can easily break if forced. Once pried open, you'll see the wiring connectors; press the clips on both sides lightly to disconnect them. The panel is now off! When reinstalling, first reconnect the wiring, align the clips properly, press them firmly into place, and then screw them back in. I recommend placing a towel on the work surface to prevent dust and slippage. The whole process took me about half an hour—just be patient and don't rush, or you might scratch the interior, which would be a real shame. There are video tutorials online for reference, and with a bit of practice, you'll get the hang of it!
