What are the steps to connect the rear tablet in a BMW 7 Series?

2 Answers
HavenAnn
09/06/25 3:52am
First, turn on the car's computer, then select the option to connect with the small tablet in the settings to successfully establish the connection. The rear small tablet is equipped with a variety of features, offering multiple adjustment modes, allowing you to select the most comfortable seating position.
Was this review help?
12
5
Share
KingAnn
09/18/25 3:49am
When connecting the rear seat tablet, I generally follow these steps: ensure the vehicle is powered on, then enter the iDrive system's settings menu, locate the rear entertainment function, and enable pairing mode. On the tablet, I turn on Bluetooth or Wi-Fi, search for an option like 'BMW Rear Seat' in the device list, and tap to connect. A pairing code prompt will appear—input the 4-digit number displayed on the car screen. Once done, the tablet can control the audio-visual system. If the connection fails, try restarting the tablet or updating the vehicle software, and avoid signal interference from excessive distance. The whole process took me 5 minutes to master, and the kids enjoy watching videos in the back seat. However, remember to prioritize safe driving and avoid distractions—it's best to set these up while parked. Always check the manual or brand app for compatibility to account for model variations.
Was this review help?
17
0
Share
Expand All
More Forum Discussions

What are the penalties for driving a vehicle without annual inspection?

According to the "Road Traffic Safety Law of the People's Republic of China (2011 Amendment)", the regulations are as follows: 1. Article 91: If a motor vehicle driver violates the road traffic safety laws and regulations regarding road traffic regulations, they shall be given a warning or fined not less than 20 yuan but not more than 200 yuan. If this Law provides otherwise, the penalties shall be imposed in accordance with the relevant provisions. 2. Article 95: If a motor vehicle driven on the road does not display a motor vehicle license plate, does not carry an inspection compliance mark or insurance mark, or does not carry the vehicle license or driving license, the traffic control department of the public security organ shall detain the motor vehicle, notify the party concerned to provide the corresponding license plate, mark or complete the relevant procedures, and may impose penalties in accordance with the provisions of Article 90 of this Law. The motor vehicle shall be returned promptly when the party concerned provides the corresponding license plate, mark or completes the relevant procedures. Those who intentionally cover, deface or fail to install the motor vehicle license plate in accordance with the regulations shall be penalized in accordance with the provisions of Article 90 of this Law.
3
4
Share

Can the Civic car lock with the key inside?

Civic cars can lock with the key inside. After the vehicle is turned off, if the doors are closed without taking the key, both the doors and the rear hatch will automatically lock after a few minutes. This feature is designed to prevent the owner from forgetting to lock the car. Precautions for using car keys: Do not leave spare keys in the car: If a smart key is lost due to improper storage, it can cause many inconveniences, and the cost of re-matching is relatively high. Experts advise not to place spare keys inside the car or together with the smart key. Avoid contact with metal objects: Smart keys may malfunction if they come into contact with or are covered by metal objects. Additionally, other items in a bumpy environment could damage the smart key. For smart sensing keys, changing the key requires modifying computer parameters and re-matching a new set of keys. The owner needs to provide vehicle and identity proofs, and the manufacturer must supply the corresponding parameters or passwords for the vehicle model. After replacement, the lost key can no longer start the engine. Another solution is to replace all the car locks, which is more secure but involves higher repair costs and longer downtime.
9
2
Share

What is the height of road speed bumps?

Road speed bumps should not exceed 30 cm in width and 5 cm in thickness (height), with two standard lengths of 25 cm and 1 meter depending on road width. Below is relevant information about road speed bumps: 1. Overview: Speed bumps, also called speed humps, are traffic installations mounted on roads to slow down passing vehicles. They typically appear in strip form (sometimes dotted patterns), made primarily of rubber or occasionally metal, with yellow-black color schemes for high visibility. These slightly raised pavement installations force vehicles to reduce speed, commonly deployed at intersections, industrial/mining zones, school areas, residential communities, and accident-prone sections as specialized traffic safety devices for controlling motor/non-motor vehicle speeds. 2. Physical properties: (1) Elongation at break: The surface material elongation should be ≥200% (≥250% for highway/urban road applications). (2) Tensile strength: Surface material tensile strength should be ≥6.0MPa (≥8.5MPa for highway/urban road applications).
17
0
Share

Will driving slightly over a single yellow line result in penalty points?

Driving slightly over a single yellow line does not incur penalty points and generally does not constitute a traffic violation. At most, it may result in a warning or a fine. Relevant regulations: According to the relevant provisions, vehicles and pedestrians shall pass in accordance with traffic signals; when encountering traffic police instructions, they shall pass according to the instructions of the traffic police; on roads without traffic signals, they shall pass under the principles of ensuring safety and smooth traffic. Drivers who violate road safety laws shall be given a warning or fined. If this law has other provisions, they shall be handled in accordance with those provisions. Legal basis: Article 36 of the "Road Traffic Safety Law": According to road conditions and traffic needs, roads are divided into motor vehicle lanes, non-motor vehicle lanes, and sidewalks. Motor vehicles, non-motor vehicles, and pedestrians shall travel in their respective lanes. If there is no division of motor vehicle lanes, non-motor vehicle lanes, and sidewalks, motor vehicles shall travel in the middle of the road, while non-motor vehicles and pedestrians shall travel on both sides of the road.
6
1
Share

Reasons for Smart Grille Malfunction?

Due to rainy and non-hot weather, the grille panel remains closed and does not open. When the vehicle passes through a puddle, water pressure acts on the grille panel, causing it to move without a computer command. This movement triggers the grille motor, which then becomes mismatched with the computer control system, leading to the malfunction. As long as the grille motor is not faulty, this issue can be ignored, and the error code can be cleared using an OBD tool. The grille, also known as steel grating, steel grid, or grid panel, is welded from flat steel and twisted steel. Its primary uses include rest platforms, walkways, trench covers, and tread plates. It is also widely adopted in environmental protection equipment and wastewater treatment due to its increasing advantages. The gap width between grille bars can be set based on the method of debris removal and pump requirements. For manual cleaning, the gap is typically 16–25mm. Grilles before sedimentation tanks or settling ponds usually have gaps of 15–30mm, with a maximum of 40mm. There are three common mechanical cleaning devices: chain-type, mobile-type, and wire rope traction-type grille cleaning machines.
3
2
Share

Will the correction of left and right longitudinal beams have any impact?

Correction of the left and right longitudinal beams will have an impact. In collision accidents, the front and rear longitudinal beams bear the main energy absorption function. The longitudinal beams absorb collision energy through crushing deformation and bending deformation. Introduction to front longitudinal beams: Many car buyers may not be familiar with front longitudinal beams. The front longitudinal beams are equivalent to the skeleton of the car, composed of two longitudinal beams located on both sides. The longitudinal beams are mostly stamped from low-alloy steel plates, with a cross-section in the shape of a channel or I-beam. The front part of the vehicle's longitudinal beams belongs to the energy absorption zone. Once a collision occurs, they will crumple, and even after repair, it is easy to detect. Therefore, inspecting the front longitudinal beams is an important area for identifying accident vehicles. Function of front longitudinal beams: Although many vehicles are equipped with front and rear anti-collision beams, in the event of a frontal collision, the two front longitudinal beams, most of which are covered by the engine, are the ones that truly play a role. In collision accidents, the front and rear longitudinal beams bear the main energy absorption function. The longitudinal beams absorb collision energy through crushing deformation and bending deformation. Among them, the front longitudinal beams bear about 60% of the total collision energy.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.