What are the steps to close and fold the mirrors on a Mercedes-Benz B200?

1 Answers
VonEmilio
07/30/25 12:41am
First, locate the button on the left side of the multifunction steering wheel and press it repeatedly; Then, a settings tab will appear on the menu interface of the instrument panel—release the short-pressed hand at this point; next, click the button on the right side of the steering wheel once. After entering, find and click the vehicle settings tab to access the vehicle settings; Once inside, click the mirrors tab and enter again; Finally, the automatic folding option will appear on the display page—check the box in front of this option to enable the mirrors to automatically retract when the car doors are locked.
Was this review help?
9
2
Share
More Forum Discussions

What is the penalty for turning right from a straight lane?

If you are caught by traffic cameras or police officers turning right from a straight lane, you will be fined 200 yuan and receive 3 demerit points. Many straight-driving vehicles occupy right-turn lanes. Many novice drivers are not very familiar with traffic rules and end up occupying right-turn lanes when approaching intersections. There are traffic markings on the ground at intersections. When crossing an intersection, check the markings in advance and drive accordingly. Violations can be completely avoided. Driving knowledge and proper speed control are essential for safe driving. The saying "drive at a moderate speed, prioritize safety and courtesy" reflects this principle. Generally, many drivers can determine their preferred and most comfortable speed after practice and testing, based on the type and performance of their vehicle. If this speed complies with traffic regulations and the relevant rules of the traffic environment, it can be set as their safe speed. Of course, urban areas differ from rural areas, and mountainous regions differ from plains. To properly control speed, it is also necessary to pay attention to the driving environment of vehicles behind and closely observe traffic signs along the way. When there is a speed limit sign, you must strictly adhere to it. Based on road conditions and traffic flow, flexibly manage and control your speed, favoring caution over haste. When driving on roads with heavy traffic and a natural speed rhythm, adjust your speed to match the flow of traffic and avoid rushing to overtake.
19
5
Share

What is the lifespan of snow tires?

Snow tires generally have a lifespan of no more than five years. The typical service life for tire products is 5 years or 60,000 to 80,000 kilometers, depending on local road conditions and specific usage circumstances. Snow tires feature softer tread compounds, with specially formulated silica-blended rubber compounds that create tighter contact with slippery ice surfaces, generating greater friction than all-season tires and significantly improving vehicle control and safety on icy roads. Snow tires (winter tires) are specifically designed for winter conditions such as snowy/icy climates and low-temperature regions, serving as an alternative to tire chains. The rubber compound formulations used in snow tires typically differ from those of all-weather tires (all-season tires).
13
2
Share

What is the Chinese name of Karma cars?

Karma cars are called Karma Motors in Chinese. Karma Motors is an automobile manufacturer under the Wanxiang Group, headquartered in Costa Mesa, California, USA. Here is some information about this car: 1. Introduction: Karma Motors is the only automobile manufacturing company in Southern California that integrates design, engineering, marketing, and handcrafted manufacturing independently. 2. History: Karma Motors was established in 2014, dedicated to developing a corporate strategy focused on luxury design, high technology, personalized customization, and exclusive customer benefits.
8
1
Share

What is the reason for exceeding the remote sensing emission limits on the road?

The reasons for excessive emissions: First, the main reason is the use of inferior fuel. When refueling, it is advisable to choose gas stations of well-known brands. The use of low-quality fuel can also lead to incomplete combustion in the engine, resulting in carbon deposits. Secondly, a clogged catalytic converter and malfunctioning oxygen sensors are also factors that contribute to excessive emissions. When you notice an unusually strong smell of exhaust, it is important to have your vehicle inspected at a reputable repair shop and address the issue promptly. Second, start by checking the OBD system; then 1. Flush the catalytic converter; 2. Clean the fuel injectors; 3. Clean the throttle body and intake passages; 4. Clean carbon deposits in the combustion chamber; 5. Clean the lubrication system and add a lubrication system repair and protection agent. Parts that may need replacement include spark plugs, fuel injectors, etc. Depending on the vehicle's condition, follow a step-by-step approach starting with the easier tasks. Third, opt for green transportation whenever possible to reduce the use of private cars; if starting the engine in a garage, keep the garage door open or turn on the exhaust fan to ensure proper ventilation; when stuck in traffic, try to turn off the engine.
18
2
Share

What is the wheelbase of the Tourneo?

The wheelbase of the Tourneo is 2933 mm, with a body length, width, and height of 4976 mm, 2095 mm, and 1990 mm respectively. The vehicle features front-engine, front-wheel drive configuration, with a MacPherson strut front suspension and a torsion beam rear suspension. The steering assistance type is mechanical hydraulic power steering, and both front and rear tires are sized at 215/65R16. In terms of active and passive safety features, the car is equipped with front airbags for the driver and passenger, tire pressure monitoring system, seatbelt reminder for the driver's seat, ABS anti-lock braking system, brake force distribution, brake assist, and traction control.
19
4
Share

What Types of Reducers Are There?

1. By transmission type: Can be divided into gear reducers, worm reducers, and planetary gear reducers; 2. By number of transmission stages: Can be divided into single-stage reducers and multi-stage reducers; 3. By gear shape: Can be divided into cylindrical gear reducers, bevel gear reducers, and bevel-cylindrical gear reducers; 4. By transmission layout: Can be divided into expansion type, split type, and coaxial reducers. A reducer is an independent component consisting of gear transmission, worm transmission, or gear-worm transmission enclosed in a rigid housing, commonly used as a speed reduction transmission device between the prime mover and the working machine.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.