What are the steps to clear the maintenance reminder for a Polo?

1 Answers
MacJuliet
07/29/25 9:34pm
Clearing the maintenance reminder for a Polo involves the following steps: 1. Insert the car key but do not turn it yet; 2. Firmly press the mileage reset button located below the speedometer and continue holding it for the next steps; 3. While holding the reset button, turn the key to the self-check position without starting the engine, still keeping the button pressed; 4. Hold the reset button for more than 10 seconds, then release it to successfully clear the reminder. The Polo is a compact car under SAIC Volkswagen, with body dimensions of 3970mm in length, 1682mm in width, and 1462mm in height, and a wheelbase of 2470mm. It is equipped with Volkswagen's high-power version EA211 1.4T turbocharged engine, delivering a maximum power of 150ps and a maximum torque of 250nm, paired with a 7-speed DSG dual-clutch transmission.
Was this review help?
17
3
Share
More Forum Discussions

What does the S gear in Jetta mean?

S gear is the sport mode of a car. The following is an introduction to the gears of an automatic transmission: 1. P gear: This is the parking gear and starting gear. When this gear is engaged, the parking lock mechanism locks the transmission output shaft. 2. R gear: This is the reverse gear. When this gear is engaged, the reverse gear hydraulic circuit of the hydraulic system is connected, causing the drive wheels to rotate in reverse for backward movement. When the vehicle is not completely stopped, do not forcibly shift to the "R" gear, as this may damage the transmission. 3. N gear: This is the neutral gear. When the neutral gear is engaged, the planetary gear system idles and cannot output power. 4. D gear: This is the drive gear, also known as the forward gear. When the gear shift lever is in this position, the hydraulic system control device will automatically connect the corresponding forward gear hydraulic circuit based on the throttle opening signal and vehicle speed signal. It can automatically shift up or down according to the driving speed, achieving the automatic transmission function. 5. S gear: This is the sport mode. When the gear shift lever is in this position, the transmission control module receives the driver's command, and the vehicle enters sport mode. The shifting logic becomes more aggressive, and shifting occurs more frequently, providing the driver with a better sense of control and throttle response. This mode can showcase the driving pleasure of the vehicle.
18
2
Share

Can Shanghai License Plates Be Used on New Energy Vehicles?

Shanghai license plates can be used on new energy vehicles. Here are the relevant details: 1. Shanghai New Energy License Plates: Shanghai's new energy license plates are scrapped along with the vehicle. When a consumer purchases a new energy vehicle for non-commercial use and does not have any other new energy vehicles registered in Shanghai, the city continues to issue free special license plate quotas for new energy vehicles under the principle of controlling the total number of non-commercial passenger vehicles. 2. One Vehicle, One Plate Policy: For new energy vehicles using special license plate quotas, a one-vehicle, one-plate policy is implemented. If a new energy vehicle is scrapped, or undergoes out-of-jurisdiction transfer, registration changes, deregistration, or theft procedures, the special license plate quota is automatically voided. No quota certificate will be reissued, and the quota cannot be transferred within three years.
10
0
Share

What are the requirements for the Subject 3 driving test?

Subject 3 driving test requirements include carrying identification documents such as ID card, vehicle preparation, nighttime driving light test, starting, driving straight through intersections, gear shifting operations, passing bus stops, crossing pedestrian crosswalks, passing school zones, changing lanes, making U-turns, and parking by the roadside. Below are relevant introductions: 1. Adjusting test mentality: Learn to appropriately self-adjust, maintain a calm mindset to cope with the test, neither arrogant nor impatient, preventing nervousness from affecting the test. 2. On-site practice at the test location: Before the test, candidates can practice driving at the actual test site, which helps them understand the test environment, familiarize themselves with the venue, and reduce nervousness during the test.
20
0
Share

Can New Energy Electric Vehicles Get Wet in the Rain?

New energy electric vehicles can get wet in the rain, but the most important thing to pay attention to is waterproofing, as rainwater causes the most damage to electric vehicles. Prolonged exposure to rain can easily cause discoloration and paint peeling, and equipment such as brakes and horns can also be damaged due to water seepage. Leaving an electric bicycle parked outdoors in the rain can easily lead to water ingress in the controller, causing it to burn out. It should be covered with a plastic sheet. Below are some maintenance methods after exposure to water: 1. Clean the vehicle: Rainwater generally contains acidic substances that can corrode the paint surface. Therefore, it is necessary to clean the vehicle promptly. You can also opt for protective maintenance treatments like waxing or glazing to effectively prevent acid rain from corroding the vehicle body. 2. Check the vehicle chassis: Undoubtedly, when a vehicle drives through water, the chassis is splashed with dirty water, which often contains various impurities that can adhere to the chassis or gaps under the body. If not cleaned in time, these impurities can cause rust on the chassis.
2
4
Share

What is the normal negative pressure for the EA888 engine?

EA888 engine negative pressure is normally between 80-100. Below is the relevant introduction: 1. Introduction: The Volkswagen EA888 engine is a newly designed engine by Volkswagen, integrating advanced technologies such as direct fuel injection, turbocharging, and variable valve timing, achieving a balance between power and economic environmental protection. 2. Displacement: (1) 1.8TSI maximum power is 118kw (160PS)—5000-6200rpm, maximum torque is 250Nm—1500-4500rpm. (2) 2.0TSI maximum power can reach 147kw (200PS)—5100-6000rpm, maximum torque is 280Nm—1700-5000rpm.
6
0
Share

How Long Does It Take from Ordering to Delivery for Volkswagen Sagitar

It usually takes about a month from ordering to delivery for the Volkswagen Sagitar. Here is a brief introduction about the Volkswagen Sagitar: 1. Basic Information: The Sagitar is a joint venture A+ class sedan brand under FAW-Volkswagen. The car was introduced into the Chinese market on April 9, 2006, and its predecessor was the fifth-generation Jetta sedan under German Volkswagen, positioned as a "German high-performance sedan." 2. Power Configuration: The Sagitar was developed based on the fifth-generation Jetta sold by German Volkswagen in North America, and it is built on Volkswagen's new-generation PQ35 chassis. The technical content is the same as that of overseas models, with the only difference being that overseas models use the most advanced FSI engine, while domestic models still use the original 1.4T, 2.0, and 1.6 engines.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.