What are the steps to activate the window roll-up feature when locking the Arrizo 5?

How to Replace the Battery in a Buick Remote?

Turn the car remote key to the back, and you can see that the back cover is divided into two parts. On the side where the key ring is visible, the battery is located under the back cover. First, insert a flat-head screwdriver into the gap and gently push upwards to partially open the back cover. Then, move the screwdriver along the gap towards both sides. Use your hand to move the back cover in the closing direction, and you can remove the back cover to see the inside of the battery. A protruding clip can be seen on one side of the battery.

13

3

Share

How to reset the tire pressure warning on a 2017 GL8?

First, press the one-touch start button below the steering wheel to power on the vehicle; otherwise, the tire pressure warning cannot be canceled. Open the central control screen, locate the 'Tire' option, click to enter, and then select the 'Set' button to proceed to the next step. Next, press the 'MENU' button on the control lever below the multifunction steering wheel and hold down the cancel button on the left side of the multifunction steering wheel. Afterward, check the vehicle dashboard to confirm that the tire pressure display is normal and the tire pressure warning has been reset.

13

2

Share

Is It Dangerous to Leave Windshield Washer Fluid in the Trunk Under Direct Sunlight?

Leaving windshield washer fluid in the trunk under direct sunlight is not dangerous, but using washer fluid that has been exposed to prolonged sunlight can pose safety hazards. Here are the specific details: 1. Deterioration: Exposure to sunlight can cause the washer fluid to deteriorate. Using deteriorated washer fluid can corrode the wiper blades, fail to clean the windshield properly, and impair the driver's visibility, thereby affecting driving safety. 2. Reduced Anti-freeze Effect: The concentration of deteriorated washer fluid decreases, making it unable to meet the requirements of anti-freeze washer fluid. In winter, this can lead to freezing and damage to the washer fluid pipes, and in severe cases, it may even burn out the washer fluid motor.

18

4

Share

Will Insurance Cover Modified Headlights?

Whether insurance covers modified headlights depends on the following two scenarios: 1. If the accident is the owner's fault, the insurance company will not cover the modified headlights because the vehicle damage insurance only covers the factory configuration of the vehicle; 2. If the accident is someone else's fault, the other party's insurance company should compensate according to the modified configuration of the accident vehicle. Precautions for modifying xenon lights: 1. Do not install the ballast near a heat source. It can generally be installed above the bumper to help dissipate heat. 2. Do not install the ballast near some wires or close to water sources. 3. Place it in a well-ventilated location to allow air flow to reduce the temperature of the ballast. 4. Avoid coiling the high-voltage wires of the ballast to prevent generating excessive magnetic fields, which could affect other electrical equipment in the car.

3

0

Share

How to Reset the Maintenance Light on the Ant?

With the engine turned off, press and hold the short-distance trip meter reset button located below the tachometer. Turn the ignition switch to the ON position, then release the short-distance trip meter reset button. The "SERVICE" indicator will appear on the display. Pull out the minute button on the clock and turn it clockwise. The mileage will be displayed on the screen. Turn off the engine to reset the reminder message. Then turn the ignition switch to the ON position, and the "SERVICE" indicator will disappear.

9

2

Share

Implementation Time of China VI Emission Standards in Tianjin?

Tianjin implemented the China VI emission standards on July 1, 2019. Here are some relevant introductions about the China VI standards: 1. Stringent limit requirements of China VI standards. The limit requirements of China VI standards are about 40% to 50% stricter than those of China V. 2. China VI adopts a fuel-neutral principle. This means that regardless of the type of fuel used, the emission limits are the same. In the previous China V stage, the emission standards for diesel and gasoline vehicles were different. 3. Compared with China V, China VI standards reduce nitrogen oxides by 77% and particulate matter by 67% in terms of emission standards. The limit requirements for particle number (PN) are introduced, and the durability of emission control devices and the requirements for onboard diagnostic systems (OBD) are tightened.

5

4

Share

What are the steps to activate the window roll-up feature when locking the Arrizo 5?

How to Replace the Battery in a Buick Remote?

How to reset the tire pressure warning on a 2017 GL8?

Is It Dangerous to Leave Windshield Washer Fluid in the Trunk Under Direct Sunlight?

Will Insurance Cover Modified Headlights?

How to Reset the Maintenance Light on the Ant?

Implementation Time of China VI Emission Standards in Tianjin?

What to Do When the Truck Rolls After Applying the Handbrake?

What to Do When the Brake Malfunction Light Comes On?

How to Conduct Annual Inspection for New Vehicles?

What does mass production of cars mean?