What are the steps to activate the auto window roll-up feature when locking the Arrizo 5?

[LaAnnie]

Here are the steps to activate the auto window roll-up feature when locking the Arrizo 5: 1. Press the brake pedal, shift the gear lever to P position, release the brake pedal, and press the one-touch start button twice consecutively; 2. Close all doors, press and hold the lock button on the driver's door for more than 10 seconds to complete the lock setting; 3. Roll the window up to the top, release the switch, then press the switch upward again for about three seconds to complete the window roll-up setting. Additional information: Taking the 2020 sport version of the Arrizo 5 as an example, it is equipped with a 1.5L turbocharged engine, with a maximum horsepower of 156ps, a maximum power of 115kw, a maximum torque of 230nm, and is paired with a 5-speed manual transmission.

[MacFernando]

Activating the window roll-up feature when locking the Arrizo 5 is quite simple, and I can share my experience. First, sit in the car and make sure all doors are closed, then start the engine without turning it off. Next, locate the window control button on the driver's side, press and hold the window-up button to raise the window to the top, and keep holding for about five to six seconds before releasing. This step allows the system to memorize the position. After that, press the door lock button and hold it for a few seconds until you hear a "beep" sound or see the indicator light flash. Once done, try locking the car and walking away—if the windows automatically roll up, it means the setup was successful. I recommend reading the manual before performing this, as there might be slight variations for different model years. This feature is super practical, helping to avoid leaving windows open and getting the interior damaged by rain, saving a lot of hassle.

[AndresFitz]

Setting up the auto window roll-up feature on the Arrizo 5 involves several steps, and I'll explain them one by one. First, get in the car, turn on the ignition to power up the vehicle without starting the engine. Then, hold the window switch to raise the glass until it's fully closed, and continue holding the button for about 4-6 seconds to let the system learn. Next, press and hold the lock button on the driver's door panel for a few seconds to trigger the activation signal, and the system will confirm. After the operation, test it by locking the car and walking away—the windows should automatically roll up. The process isn't difficult, but be patient as the timing of holding the buttons is crucial—don't release them halfway. The benefit is that it's incredibly convenient for preventing theft when parking at night or protecting interior components from rain.

[LaEmerson]

To activate the automatic window roll-up feature when locking the Arrizo 5, the steps are straightforward and simple. When I operated it, I first started the vehicle and kept the engine in the ON state. Then, I held down the window up button all the way to the top without releasing it for about five seconds to let the system memorize the position. After that, I pressed and held the lock button for a few seconds until I heard a confirmation beep. Finally, I turned off the engine, locked the car, and tested whether the windows rolled up successfully. It's good to practice a few times to avoid mistakes in the steps, which is especially helpful for new car owners to prevent confusion. This feature provides sun protection in summer and prevents freezing in winter, enhancing comfort.