What are the steps for starting the car on the first day of driving practice?

1 Answers
Maci
07/29/25 12:52pm
Steps for starting the car on the first day of driving practice: Prepare to start by shifting into first gear, turn on the left signal before the car moves, honk the horn, then release the handbrake. Starting must be done with the clutch at the biting point (half-engaged). Once the car moves, shift to second gear. Apply slightly more throttle in second gear, then turn off the signal and shift to third gear. Apply even more throttle in third gear, increase speed, and shift to fourth gear. Shifting between fourth and fifth gears should be quick, and double-clutching must be clearly distinguished. Remember the standardized actions. Parking steps: 1. Pull over to the side of the road, immediately turn on the left signal, press the clutch, press the brake, observe the dashboard to reduce speed below 20 km/h, then release the brake. 2. Turn the steering wheel, observe the hole in the middle of the window to see if it aligns with the edge line. If aligned, turn the steering wheel to the left until the car is parallel to the lane, then press the brake. 3. Lift the handbrake, shift into neutral, release the clutch, release the brake, and turn off the signal.
Was this review help?
18
0
Share
More Forum Discussions

What does the car SOS emergency call mean?

Car SOS emergency call is an onboard self-rescue system. Here are the relevant details about the SOS emergency call: 1. The SOS system belongs to the telematics system. Installing this system in cars is mainly for drivers and passengers in case of danger or vehicle malfunction. The system can alert and locate the vehicle through the manufacturer's built-in smart internet system. 2. In case of an emergency, simply press and hold the SOS button for more than two seconds, and the in-car connected system will automatically connect to a customer service representative via voice. 3. If the indicator light turns on and displays driving instructions, then an emergency rescue call cannot be made. These two situations generally cannot be resolved on their own and require a visit to a maintenance facility to check the fault code storage. Common issues include software or hardware problems with the emergency call control unit.
15
4
Share

What does the BrakePadsWorn warning light indicate?

BrakePadsWorn indicates an issue with the brake pads, requiring inspection of the braking system. This light typically illuminates when the parking brake is engaged or during braking, and should turn off automatically after braking is completed. If the brake warning light remains brightly lit, it signifies a malfunction in the braking system that requires immediate repair at a service facility. Below are the benefits of lubricating the brake calipers and cleaning the brake discs. Brake Caliper Lubrication Maintenance: Lubricating the moving shafts and rubber seals of the brake calipers helps maintain the softness of the caliper bushings and extends their service life. It is recommended to use fully synthetic brake caliper lubricant for this purpose. Brake Disc Cleaning: Quickly removes oil stains, dirt, and friction dust from brake discs, brake drums, and related components, ensuring optimal heat dissipation from the brake discs. This process also eliminates squeaking noises during braking and promotes more even braking performance.
3
4
Share

Where are the fog lights on the Atenza?

The fog lights on the Atenza are installed at the front and rear of the vehicle, serving to illuminate the road and provide safety warnings during rainy or foggy weather conditions, thereby enhancing visibility for both the driver and surrounding traffic participants. Due to low visibility in foggy conditions, which restricts the driver's line of sight, these lights help increase the operational distance. Fog lights are categorized into front fog lights and rear fog lights, with the front fog lights typically being bright yellow and the rear fog lights red. The Atenza is a flagship model of the new generation mid-to-high-end sports sedan, developed and manufactured based on Mazda's spirit of breaking conventions and starting from scratch. In terms of exterior design, the Atenza adopts Mazda's new KODO design language, featuring a U-shaped front face and LED headlights, with LED daytime running lights integrated into the headlight assembly of the new model.
5
0
Share

Can New Cars Meeting China IV Emission Standards Be Licensed?

Cars meeting China IV emission standards cannot be licensed, but those already licensed can still be used. After the implementation of the 'China V' standard, 'China IV' vehicles can still be driven on the road, and used cars can be transferred locally or sold to other regions, but not to key areas designated by the state for air pollution prevention and control. Starting from April 1, 2016, in 11 provinces and cities (Beijing, Tianjin, Hebei, Liaoning, Shanghai, Jiangsu, Zhejiang, Fujian, Shandong, Guangdong, and Hainan), all imported, sold, and registered light-duty gasoline vehicles, light-duty diesel passenger vehicles, and heavy-duty diesel vehicles (only for public transport, sanitation, and postal purposes) must comply with the 'China V' standard. In other regions of the country, starting from January 1, 2017, all manufactured, imported, sold, and registered light-duty gasoline vehicles and heavy-duty diesel vehicles (for passenger and public transport, sanitation, and postal purposes) must comply with the 'China V' standard; starting from January 1, 2018, light-duty diesel vehicles must comply with the 'China V' standard.
14
1
Share

Which city does the license plate 'Liao H' belong to?

Liao H is the license plate code for Yingkou City in Liaoning Province. Other license plate codes in Liaoning Province are as follows: Liao A for Shenyang City, Liao B for Dalian City, Liao C for Anshan City, Liao D for Fushun City, Liao E for Benxi City, Liao F for Dandong City, Liao G for Jinzhou City, Liao J for Fuxin City, Liao K for Liaoyang City, Liao L for Panjin City, Liao M for Tieling City, Liao N for Chaoyang City, Liao P for Huludao City. License plate composition: 1. The first character of the license plate is a Chinese character, representing the provincial-level administrative region where the vehicle is registered, which is the abbreviation of provinces, municipalities, and autonomous regions; 2. The second character is an English letter, representing the prefecture-level administrative region where the vehicle is registered, which is the letter code for prefecture-level cities, regions, autonomous prefectures, and leagues, generally ranked by the provincial vehicle management office based on the administrative divisions of each region.
10
1
Share

Why is there a ticking sound after the car is turned off?

Generally, the reasons for abnormal sounds after the car is turned off are as follows: 1. Uneven cooling of the engine. After driving for a period of time, the engine temperature is high. When turned off, the temperature of various components decreases, and thermal expansion and contraction are not uniform, causing friction between metal parts inside the engine due to cooling contraction, resulting in abnormal sounds. 2. Turbo cooling sound. Under normal circumstances, the exhaust gas temperature reaches 600-700°C, accelerating the temperature generated by the rapid rotation and friction of the turbo. After turning off, thermal expansion and contraction are also very noticeable, leading to abnormal sounds. 3. Exhaust pipe cooling sound. Typically, the exhaust pipe temperature during cold idle is around 200 degrees. When the car is under high load or there is a mixture burning in the exhaust pipe, the temperature will be even higher. Therefore, the exhaust pipe also undergoes thermal expansion and contraction, producing abnormal sounds, often originating from the front end of the exhaust pipe and the flexible connection area.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.