What are the steps for replacing the tie rod end on the Buick Encore?

[JamesonAnn]

For the Buick Encore, the steps to replace the tie rod end are as follows: 1. Preparation: Gather the necessary tools, including wrenches and sockets; 2. Remove the front left and right wheels: Turn the steering wheel to the center position, then remove the bolts; 3. Remove the tie rod end: Use tools to loosen the fixing nut of the tie rod end, unscrew the nut, fix the special tool on the ball pin and steering knuckle arm, and remove the ball joint; 4. Remove the tie rod bracket: Use a torque wrench and a 17mm socket with an extension to unscrew the two fixing nuts of the tie rod bracket, remove the nuts, and take out the tie rod bracket; 5. Remove the steering gear dust cover: Use pliers to loosen the clamping collar of the steering gear dust cover, then remove the fixing ring and dust cover; 6. Remove the tie rod and its ball joint: Use a hammer to loosen the clamping caps at both ends of the connecting rod, unscrew the left and right tie rod ends and connecting rod, remove the clamping caps, and unscrew the fixing nuts; 7. Inspect the tie rod end: Check the threads on the ball joint nut and replace if damaged; 8. Replacement: Finally, replace the ball joint.