What are the steps for replacing a car tire?
2 Answers
Car tire replacement steps are: 1. First loosen the lug nuts of the damaged tire, just loosen them without fully removing them at this stage; 2. Position the jack under the car, making sure to align it correctly and avoid contacting the car body metal. Once the car is lifted, you can fully remove all the lug nuts of the tire to be replaced, remember to keep them safe; 3. As a precaution in case the jack suddenly fails, you can place the removed flat tire flat under the car; 4. Next, you can put the spare tire on. When tightening the lug nuts, first tighten all nuts to a uniform tightness, then fully tighten them in a diagonal sequence.
Changing a tire on the roadside is a practical skill, as anyone might face this situation. Park your car on a safe, level surface, engage the handbrake, turn on the hazard lights, and place the warning triangle—don’t forget this safety step. Take out the spare tire, jack, and wrench tools, then slightly loosen the lug nuts without removing them completely. Next, use the jack to lift the car at the designated support point under the frame, ensuring stability. Remove the old tire, align the spare tire with the bolt holes, and loosely tighten the lug nuts. After lowering the jack, tighten all lug nuts in a star-shaped, crisscross pattern to ensure even force distribution. Check if the spare tire’s air pressure is adequate—usually, it’s speed-limited to 80 km/h. Pack up the tools and drive carefully to a professional shop for a new tire. It’s advisable to practice beforehand; a small jack with a handle can save effort. The key is to stay calm and prioritize safety—never attempt this on a highway or slope to avoid accidents.
