What are the steps for removing and installing the third row of seats in the Buick GL8?

1 Answers
JustinAnn
07/29/25 9:43pm
Buick GL8 third row seat removal and installation steps are: 1. Locate the mechanism hidden behind the seat, then lift the seat; 2. Remove the seat from the front clasps, operate the mechanism to fold down the backrest, and then remove the detached seat from the vehicle compartment. Taking the 2021 Buick GL8 Land Business Class 652T Comfort model as an example: it is equipped with a 9-speed automatic manual transmission, with a top speed of 195 km/h and a fuel tank capacity of 66 liters. The 2021 Buick GL8 Land Business Class 652T Comfort model measures 5238mm in length, 1878mm in width, and 1776mm in height, with a wheelbase of 3088mm. The engine produces a maximum torque of 350 Nm, with the maximum torque speed ranging from 1500 to 4000 rpm.
Was this review help?
19
5
Share
More Forum Discussions

How many production bases does Haval have?

Haval is manufactured by Great Wall Motor Company Limited, with its headquarters located in Baoding City, Hebei Province. Currently, Great Wall Motor has three complete vehicle production bases in Tianjin, Baoding, and Xushui, as well as under-construction production bases in Yongchuan, Chongqing, and Rizhao, Shandong. Additional information: Below is an introduction to Great Wall Motor: 1. In terms of R&D, the company is building a global R&D layout centered in Baoding headquarters, covering Europe, Japan, North America, and India. 2. Great Wall Motor adheres to the corporate spirit of "making progress every day," consistently committed to producing high-quality products, continuously optimizing service experiences, and enhancing customer satisfaction. 3. Great Wall Motor has grown the Haval brand to an annual sales volume of one million vehicles in ten years, which is a miracle in China's automotive industry. The future goal of Great Wall Motor is to become the world's largest professional SUV manufacturer.
15
5
Share

How to Fix the Whining Noise from Ford Kuga Fuel Tank Cap?

Ford Kuga fuel tank cap making abnormal noise requires inspection and repair, including replacing the carbon canister. The fuel tank is designed with a vent pipe connecting the carbon canister to the atmosphere, so the fuel tank is not a completely sealed container. If there is a feeling of airflow sound being sucked in, it indicates that the carbon canister connected to the fuel tank may be blocked or there is a design defect. Below are the related details: 1. Concept: It is a container for fuel, specifically designed to store hydraulic oil or hydraulic fluid in a hydraulic system. 2. Features: (1) Sufficient volume: The fuel tank must have a large enough volume; (2) Insert below the lowest liquid level: The suction pipe and return pipe should be inserted below the lowest liquid level to prevent air suction and splashing of return oil causing bubbles; (3) Spacing: The distance between the suction pipe and return pipe should be as far as possible, with a partition set in between; (4) Cover plate: To maintain the cleanliness of the oil, the fuel tank should have a sealed cover plate around it.
11
1
Share

What is the reason for the abnormal flashing of the Toyota AC switch?

Toyota AC switch abnormal flashing may be caused by the compressor protection device tripping. The compressor overload protection tripping indicates that the system's high pressure is too high or the current is too large. If the high pressure is too high or overheating, the reasons are as follows: 1. Too much refrigerant: appropriately reduce the refrigerant amount. 2. Poor heat dissipation: check if the condenser pipe is dirty and clean the condenser. 3. Blockage in the pipeline system: refer to the pressure gauge to judge, eliminate, and reprocess the system. 4. Dust and scale accumulation on the evaporator or filter: reduced airflow, abnormal system pressure and temperature, clean the evaporator or filter. 5. Lack of refrigerant: when there is a lack of refrigerant, the compressor exhaust temperature will overheat, causing the overheating load protection switch to trip. If it is a circuit problem, the reasons are as follows: 1. Control circuit board failure. 2. Temperature sensor overload, incorrect information. 3. Loose power wiring, poor contact. 4. Start capacitor or compressor start coil burned out.
17
1
Share

Do both AC and Auto need to be turned on for the air conditioner?

The auto switch and AC switch of the air conditioner do not need to be turned on simultaneously. The AC button controls the air conditioning compressor, which must be turned on for cooling in summer. Auto stands for automatic, meaning that when this function is activated, the car's air conditioner will automatically adjust to the appropriate temperature and fan speed. In summer, pressing the Auto button will automatically turn on the AC button. In winter, after the engine is preheated, the heat from the engine's water circulation is used, so there is no need to press the AC button. Precautions for using the car air conditioner are as follows: 1. Turn off the AC during startup and rapid acceleration: Since the air conditioner (non-independent type) consumes some of the engine's power, it is best to turn off the AC during vehicle startup and rapid acceleration, and then turn it on after the vehicle is moving. This prevents insufficient engine power during acceleration and startup and also helps save fuel. 2. Do not set the air conditioner temperature too low: Many drivers like to set the temperature very low in summer, thinking it is comfortable, but this is a misconception. A large temperature difference between the inside and outside of the car can easily cause the driver to catch a cold, and excessively low temperatures may also increase the risk of arthritis for passengers. Normally, the temperature inside the car should be 5°C to 6°C different from the outside temperature. 3. Control the direction of the air vents: Based on the principle that cold air sinks and hot air rises, drivers can adjust the air vents accordingly—point them upward when cooling and downward when heating.
8
5
Share

What are the differences between CFMOTO 1250 and Benelli 1200?

Here are the differences between CFMOTO 1250 and Benelli 1200: Appearance: The CFMOTO 1250 appears more refined. Its split headlight design features a large area with two 'T'-shaped LED light strips inside, giving a very imposing visual effect, somewhat reminiscent of Volvo's 'Thor's Hammer' design. In contrast, the Benelli 1200's integrated headlight looks bulkier and bears a strong resemblance to its flagship cruiser, the 600GS. Performance: The CFMOTO 1250 model. This premium cruiser is equipped with a V-twin liquid-cooled engine sourced from KTM, with a displacement of 1278cc and a maximum output of 142.8 horsepower. The Benelli 1200 uses its own triple-cylinder engine, with a displacement of 1209cc and a maximum horsepower of approximately 135.
9
3
Share

Can a Car Run Out of Battery?

Car can run out of battery. Long-term parking of the car will cause the battery to lose power. Battery power loss: Long-term parking of the car leads to battery power loss or the burning out of the car generator's fuse, which causes the car battery to lose power. Battery damage: Low battery voltage, insufficient charging, or battery damage can cause the car battery to run out of power. Engine damage: Engine malfunction or damage prevents the generator from working, ultimately leading to the battery running out of power. Insufficient electrolyte: The electrolyte level should be between the maximum and minimum levels. Insufficient electrolyte or leakage naturally leads to insufficient power storage in the car battery. Battery terminal corrosion: Corrosion of the car battery terminals causes poor contact, leading to the car battery running out of power.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.