What are the steps for removing and installing the air conditioning filter in a Golf?
3 Answers
The steps for removing and installing the air conditioning filter in a Golf are: 1. The air conditioning filter is located below the glove compartment on the passenger side, covered by a panel. Remove the two screw fasteners to take off the panel; 2. After removing the panel, you will see a rectangular cover for the air conditioning filter. Pull it horizontally according to the arrow to remove it; 3. Take out the old air conditioning filter; 4. Replace it with a new Kun brand air conditioning filter, with the white side facing up; 5. Reinstall the cover in the opposite direction of the arrow. The Golf is a classic compact hatchback family car produced by Volkswagen. The dimensions of the car are 41999mm in length, 17869mm in width, and 14799mm in height, with a wheelbase of 2578mm. In terms of power, the Volkswagen Golf is equipped with EA211 series 1.6L and 1.4T engines.
Changing the air filter for a Golf by yourself is actually quite simple. I often do it myself to save money and have peace of mind. First, locate the filter position—it's in front of the passenger seat, below the glove compartment. There's a cover there. Usually, you need to remove the glove compartment by unscrewing the bottom screws with a screwdriver and pulling it out gently. Then, open the filter cover and carefully remove the old filter—wearing gloves is advisable as there might be dust. When inserting the new filter, pay attention to the arrow direction, which indicates airflow; installing it backward can affect cooling. Finally, reattach the glove compartment and tighten the screws. The whole process takes about 10 minutes. Replacing it once a year keeps the cabin air fresh, which is especially important for allergy sufferers. Remember to disconnect the car battery to prevent short circuits—doing it yourself saves you about 200 bucks at the repair shop.
If you're a beginner, don't worry, I'll guide you step by step through changing the Golf's cabin air filter. First, go to the front passenger seat, crouch down and look for a small panel beneath the glove compartment - the filter is located behind it. Use a standard Phillips screwdriver to loosen the screws, then gently remove the glove box unit to avoid damaging any wiring. Next, open the filter cover and slowly pull out the old filter without forcing it, to prevent debris from falling inside. The new filter has an arrow marking - just align it with the airflow direction and insert it. After securing the cover, reassemble the glove box and tighten the screws. Be careful throughout the process to avoid cutting yourself or leaving tools behind. It took me 20 minutes when I first did it, but now I'm much faster. I recommend changing it every six months or 10,000 kilometers - it's cost-effective and better for your health.
