What are the steps for installing a quick coupler on an excavator?

1 Answers
StJohn
07/29/25 10:36pm
Connect the quick coupler to the front end of the excavator's small arm and insert the pin, following the same steps as installing a bucket. Turn on the spot welder power supply, weld the dedicated iron pipe for the quick coupler onto the upper part of the excavator's small arm, and secure the iron pipe with pipe clamps. Install the solenoid valve at the end of the large arm, connect the T/P port, and link the oil pipe to the quick coupler cylinder.
Was this review help?
3
4
Share
More Forum Discussions

Is it okay for the engine compartment to have high temperatures in summer?

High temperatures in the engine compartment during summer are normal. As long as the water temperature warning light on the dashboard is not activated, it indicates the engine is operating normally. Automotive engines use water cooling for heat dissipation. Here are the details: 1. Car Radiator: The car radiator, also known as the heat exchanger, is a key component of the car's cooling system and part of the vehicle's heat dissipation system. Most cars use water-cooled engines, which rely on coolant circulating continuously within the engine to dissipate heat. 2. Function of the Car Radiator: To dissipate heat. The coolant absorbs heat in the water jacket, releases it when flowing through the radiator, and then returns to the water jacket, continuously cycling to achieve heat dissipation and temperature regulation.
11
2
Share

What is the method to forcibly open the Edge's trunk?

The methods to forcibly open the Edge's trunk are: 1. Press the unlock button on the car's wireless remote key and gently lift the trunk to open it; 2. Locate the corresponding trunk switch button above the license plate and press it to automatically open the trunk. Taking the 2020 Edge as an example, it belongs to the mid-size SUV category with body dimensions of 4878mm in length, 1925mm in width, 1734mm in height, and a wheelbase of 2850mm. The 2020 Edge features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 245PS, a maximum power of 180kW, and a maximum torque of 390Nm, paired with an 8-speed automatic transmission.
15
5
Share

Is an Automatic Clutch Considered an Automatic Transmission?

An automatic clutch is part of an automatic transmission. In an automatic transmission vehicle, the driver does not need to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. The correct method to start an automatic transmission car is: 1. Turn on the power, then start the car; 2. After ignition, press the brake, shift to D gear, release the handbrake, and gently press the accelerator to start; 3. After starting, accelerate appropriately according to road conditions. The functions of the clutch are: 1. Gradually increase the driving force of the car to ensure a smooth start; 2. Temporarily separate the engine and transmission for gear shifting; 3. Prevent overload of the transmission system; 4. Reduce torsional vibration impact from the engine and prolong the service life of transmission gears.
3
5
Share

Where is the OBD interface of Haima S5?

The OBD interface of Haima S5 is located inside the storage compartment below the left side of the steering wheel. Here is some information about OBD: 1. OBD is the abbreviation of On-Board Diagnostics, which is translated as "On-Board Automatic Diagnostic System" in Chinese. 2. This system continuously monitors the engine's operating condition to check whether the vehicle's exhaust exceeds the standard. Once it exceeds the standard, a warning will be issued immediately. Additional information: 1. OBD not only involves automotive technology itself but is also limited by related conditions such as fuel quality. It also imposes higher usage requirements on drivers. 2. The OBD device monitors multiple systems and components, including the engine, catalytic converter, particulate trap, oxygen sensor, emission control system, fuel system, EGR, etc.
9
1
Share

How Long Does It Take to Repair and Paint a Car?

Repairing and painting a car typically takes between 1 to 7 days, depending on the area that needs to be painted. To prevent car paint from peeling, follow these methods: 1. Avoid using a duster or dry cloth to wipe the paint surface directly; instead, rinse off dust and dirt with water and then use a clean, absorbent cloth to dry. 2. Avoid prolonged exposure to sunlight when parking. 3. Reduce the frequency of car washes and avoid waxing or polishing. 4. Promptly remove any corrosive substances to minimize paint corrosion. The functions of car paint include: 1. Protecting the car from various corrosive elements in the atmosphere. 2. Enhancing the car's appearance. 3. Indicating the type of vehicle. 4. Improving comfort and sealing, reducing noise caused by vibrations.
3
0
Share

How Long After Replacing the Windshield Can You Drive?

Depending on the quality of the adhesive and seasonal factors, the windshield adhesive typically takes one to three days to fully cure. During this period before it's completely dry, you can drive the car, but you need to pay attention to the following points: 1. Do not wash the car within three days after replacing the windshield, and remove the tape securing the windshield position only after three days. 2. Try to avoid driving on excessively bumpy roads, and avoid sudden braking and rapid acceleration to prevent the windshield from shifting. 3. Do not insert parking permits or other cards into the gap between the front windshield and the dashboard. 4. Avoid driving on highways and keep the maximum speed below 80 kilometers per hour. 5. Do not apply window tint within seven days. After replacing the rear windshield, do not open the windows while driving for three days to prevent the rear windshield from shifting due to wind pressure.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.