What are the steps for car painting?

What is the minimum ground clearance of a sedan?

The minimum ground clearance of a sedan ranges between 110mm and 150mm. For sedans: 1. The larger the ground clearance, the better the passing performance relatively, but the worse the high-speed stability; 2. The smaller the ground clearance, the better the high-speed stability, but the worse the passing performance. Extended content: 1. The minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the supporting plane when the car is fully loaded and stationary, which is used to characterize the car's ability to pass obstacles such as stones and stumps without collision. 2. Ground clearance is related to the vehicle's load. The heavier the load, the smaller the ground clearance. Nowadays, models equipped with air suspension can automatically adjust the ground clearance, better meeting the dual needs of passing performance and high-speed stability. 3. The minimum ground clearance must consider the passing performance when loading and unloading platforms during transportation, and the possibility that the sedan will not scrape when approaching the edge of ordinary sidewalks. If sales are limited to a certain country or region, the local road quality must also be considered. At the same time, the value of the minimum ground clearance has certain limitations, which are related to the vehicle's function and aerodynamics.

11

1

Share

What does MacPherson independent suspension mean?

Suspension system refers to a connecting structural system between the body, frame, and wheels, and MacPherson independent suspension is one type of suspension system. It mainly includes components such as shock absorbers, suspension springs, lower control arms, longitudinal rods, steering knuckle arms, rubber bushings, and connecting rods. Extended content: 1. Advantages: MacPherson suspension has good responsiveness and handling, simple structure, small space occupation, low cost, compact structure, small changes in front wheel alignment parameters when the wheels bounce, and because the upper control arm is eliminated, it facilitates the arrangement of the engine and steering system. It is suitable for arranging large engines and assembling on small car bodies. 2. Disadvantages: When driving on uneven roads, the wheels are prone to automatic steering, so the driver must use force to maintain the direction of the steering wheel. When subjected to severe impact, the strut is prone to bending, thus affecting steering performance. Poor stability, weak anti-roll and braking nod ability, which can be alleviated by adding a stabilizer bar but cannot be fundamentally solved, low durability, shock absorbers are prone to oil leakage and need to be replaced regularly.

8

1

Share

Is it normal for car tires to have different production dates?

Under normal circumstances, the tires on all four wheels of a new car are produced in the same year and same cycle. However, even if the four tires are not from the exact same date, they may still belong to the same batch. Sometimes there might be a slight time difference, but the dates should not vary significantly. If the time difference is substantial, it could indicate a problem. Additional information: 1. Generally, tires are produced first because they need to be manufactured by tire companies before being sold to automobile manufacturers for installation on completed vehicles. 2. All tires have production dates, which can be found on the sidewall of the tire. There is a four-digit code in an elongated oval shape at the end of the DOT marking. The first two digits represent the week of the year, and the last two digits represent the year. 3. For new cars, it is acceptable to use tires with different production dates, but tires on the same axle must be of the same brand, same tread pattern, same size, same load index, same speed rating, and have similar tread depths. This is to ensure safe driving.

9

3

Share

Why Does Brake Failure Occur Sometimes?

The causes of brake failure include the following points: 1. Lack of necessary maintenance on the braking system, excessive impurities in the brake master cylinder, poor sealing, failure of the vacuum booster pump, overly dirty brake fluid or mixing different types of brake fluid leading to vapor lock when heated, leakage in the brake master cylinder or wheel cylinders, and air leaks in the air reservoir or pipe connections. 2. Mechanical failure due to improper operation, such as prolonged downhill driving causing the brake pads to overheat from friction, carbonization of the brake drums, and complete loss of braking function. 3. Severe overloading, which increases the vehicle's inertia under gravitational acceleration, directly leading to brake failure.

19

0

Share

Brake Noise After Car Wash?

After washing the car, water enters the brakes, causing the brake discs and pads to rust and stick together. When you start driving again, this can result in unusual noises. Applying butter or specialized lubricant at the connection point between the brake pads and calipers can resolve this issue. Below is related information about brake noise: 1. In automatic transmission vehicles, slow release of the brakes can cause noise—a squeaking sound when starting. 2. During colder temperatures, rubber components in the suspension become stiffer, and the surfaces of the brake discs and pads may change, leading to noise upon starting, which usually subsides as the car warms up. 3. Both brake discs and pads are high-wear items. Each braking action causes friction between these parts, leading to wear over time. Excessive wear can result in noise, so regular inspection and replacement are necessary.

14

2

Share

What car brand has an L as its logo?

An L is the logo of Lexus cars. Here is some information about Lexus: 1. The Lexus car emblem uses the uppercase letter L from the name Lexus, enclosed within an oval. The oval represents the Earth, signifying that Lexus vehicles are distributed worldwide. 2. The flagship model of Lexus is the LS, which competes in the same class as the Mercedes-Benz S-Class, BMW 7 Series, and Audi A8. The Lexus LS is the only D-segment car in the Lexus lineup, perfectly combining comfort, powerful performance, excellent handling, and safety. 3. Its bold and sleek exterior design, along with numerous user-friendly interior features, fully embodies Lexus's advanced, elegant, and understated design philosophy. The Lexus LS is equipped with a 4.6 to 5.0-liter V8 engine, paired with an 8-speed automatic transmission. In addition to standard safety features such as the Anti-lock Braking System (ABS) and Traction Control System (TRC), the advanced Vehicle Dynamics Integrated Management (VDIM) system is also applied in the new flagship LS extended version, providing the highest level of safety for drivers and passengers.

7

4

Share

What are the steps for car painting?

What is the minimum ground clearance of a sedan?

What does MacPherson independent suspension mean?

Is it normal for car tires to have different production dates?

Why Does Brake Failure Occur Sometimes?

Brake Noise After Car Wash?

What car brand has an L as its logo?

What is the passing score for the 50-question online driver's license review test?

What brand is naaats tires?

What is the fuel tank capacity of the Jetour X70PLUS?

How Many Kilometers Should Automatic Transmission Fluid Be Changed?