What are the starting steps for the Volvo XC60?

1 Answers
MacMia
07/30/25 12:28am
The starting steps for the Volvo XC60 are basically the same as those for most automatic transmission models. After entering the vehicle, the driver should first press the brake pedal, then press the one-touch start button. Once the vehicle is started, shift the gear to D, release the electronic parking brake, and the car can be driven normally. The Volvo XC60 is a mid-size SUV under Volvo Asia Pacific. It features a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. In terms of body dimensions, it measures 4688mm in length, 1902mm in width, and 1658mm in height, with a wheelbase of 2865mm. It is powered by a 2.0T turbocharged engine, paired with an 8-speed automatic transmission.
Was this review help?
15
1
Share
More Forum Discussions

How to Replace the Air Conditioning Filter in a Luxgen U6?

The method for replacing the air conditioning filter in a Luxgen U6 is as follows: 1. Open the glove compartment on the passenger side, press the plastic clips inside, and remove the glove compartment; 2. Unscrew the screws on the cover plate and remove it; 3. Pull out the old air conditioning filter to replace it. Taking the 2019 Luxgen U6 as an example, its body dimensions are: length 4628mm, width 1825mm, height 1637mm, with a wheelbase of 2720mm. The 2019 Luxgen U6 is equipped with a 1.6L turbocharged engine, delivering a maximum horsepower of 167PS and a maximum torque of 245Nm.
1
3
Share

What Does Low Tire Pressure Mean?

Tire low pressure means that the tire pressure is too low and needs to be replenished. The effects of low tire pressure are: 1. It increases the contact area between the tire and the ground; 2. The steering wheel becomes heavier, affecting driving; 3. The tire is prone to overheating, increasing the risk of a blowout; 4. It causes the tire body to expand, making it more likely for cracks to appear on the inner and outer sides of the tire, accelerating rubber aging. The functions of tires are: 1. To prevent severe vibrations and early damage to automotive components, adapt to the vehicle's high-speed performance, and reduce driving noise; 2. Together with the vehicle's suspension, they cushion the impacts encountered during driving and dampen vibrations; 3. To transmit traction and braking torque, ensuring good adhesion between the wheel and the road surface to improve the vehicle's power, braking, and passability; 4. To support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions.
17
5
Share

How to Fold Audi Side Mirrors?

Audi side mirrors can be folded by following these steps: Open the driver's door, locate the mirror adjustment knob, turn it to the upper left corner, and the mirrors will automatically fold when the car is locked. Audi models include: Audi A3, Audi A4, Audi A7, Audi Q3, Audi Q7, Audi Q8, etc. Taking the 2020 Audi A4 Fashion Dynamic model as an example, it is a mid-size car with body dimensions of: length 4858mm, width 1847mm, height 1439mm, wheelbase 2908mm, minimum ground clearance 118mm, fuel tank capacity 56L, and trunk capacity 424L.
17
1
Share

How to Solve Excessive HC Emissions?

Solutions for excessive HC emissions: Use higher-octane gasoline. Below is relevant information about HC: 1. Definition: HC in vehicle emissions represents harmful hydrocarbon compounds. 2. Hazards: (1) Rapid urban temperature rise: Carbon dioxide is a greenhouse gas that enters the atmosphere, creating a greenhouse effect that raises temperatures while simultaneously damaging Earth's protective ozone layer, allowing direct sunlight to reach the surface and accelerate warming. (2) Health risks: Nitrogen oxides and lead compounds entering lungs and bloodstream severely damage respiratory systems, causing various illnesses that endanger human health.
5
1
Share

How to use ETC for the first time?

The method for using ETC for the first time is: activate the ETC device and install it in the required position. ETC is an Electronic Toll Collection system, which allows vehicles to pay highway or bridge tolls without stopping at toll stations. The installation method for vehicle ETC is: 1. Check if the ETC card and electronic tag are damaged, press the anti-tamper button on the back of the electronic tag, the red light will briefly light up, and the OLED screen will display "Tag invalid, please insert card," indicating the device is functioning normally; 2. Clean the front windshield, peel off the protective film of the electronic tag, stick it to the installation position, and press firmly for about 2 to 3 minutes; 3. Insert the ETC card with the front facing the driver, the back facing the windshield, and the chip part inserted into the electronic tag device.
4
4
Share

What to Do When the Car Indicates High Transmission Temperature?

The solutions for when the car indicates high transmission temperature are: 1. Pull the car over to the side and let the transmission temperature gradually decrease; 2. Check if the transmission's radiator fan is functioning properly and whether the coolant and transmission fluid are at the correct levels, replenishing them if necessary; 3. Inspect if the transmission cooler is working correctly and if the grille is clogged; 4. Once the transmission temperature returns to normal and the dashboard warning light turns off, you can continue driving. The reasons for the car indicating high transmission temperature are: 1. The engine operating for extended periods or under heavy load, raising the coolant temperature and affecting transmission cooling; 2. Insufficient coolant in the radiator, reducing the cooling system's effectiveness; 3. Slipping transmission clutch.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.