What are the starting procedures for the Volkswagen Tiguan?

2 Answers
MacEliza
07/28/25 9:32pm
The starting procedures for the Volkswagen Tiguan are: 1. Without pressing the foot brake, press the start button twice to initiate the vehicle's computer system self-check, which should last at least six seconds; 2. Press the foot brake and press the start/stop button to ignite; 3. Release the foot brake and allow the vehicle to warm up while stationary; 4. Press the foot brake, release the handbrake, and shift the gear from P to D; 5. Gradually release the foot brake to start moving; 6. Depending on road conditions, smoothly press the accelerator to increase speed. Taking the 2017 Volkswagen Tiguan as an example, it is a compact SUV with body dimensions of: length 4506mm, width 1809mm, height 1685mm, a wheelbase of 2684mm, and a body weight of 1600kg.
Was this review help?
5
4
Share
DiValeria
08/12/25 2:10am
When it comes to starting my Tiguan, the steps are quite simple but require attention to detail. Before getting in the car, make sure the key is in your pocket or bag—just approach the vehicle to automatically unlock the doors without needing to take it out. Once seated in the driver's seat, adjust the seat and mirrors for clear visibility, then firmly press and hold the brake pedal to stay stationary. Next, press the start button near the instrument panel, and the engine will start immediately. Wait a few seconds to listen for smooth engine sounds while scanning the dashboard indicators, such as the battery or engine light, to ensure they’re not illuminated. If the car doesn’t start, it could be due to a low key battery or a system malfunction—try placing the key against the center console or restarting the vehicle system. After a successful start, check the air conditioning and display settings to avoid distractions while driving. This routine is easy to handle daily, and making it a habit ensures safety and efficiency.
Was this review help?
3
0
Share
Expand All
More Forum Discussions

How to Check Vehicle Registration Location?

The method to check the vehicle registration location is to visit the vehicle management office where the vehicle information is registered. Relevant details are as follows: 1. If you want to check whether the vehicle information has been transferred to the local vehicle management office: you need to bring your ID card to the archives department of the local vehicle management office for inquiry. 2. If a local vehicle is transferred to another location: to check whether the vehicle information has been transferred out, you can inquire at any service window of the local vehicle management office with your ID card. The vehicle status will show whether it has been transferred out. 3. If you want to check whether the vehicle's file has been sent to the vehicle management office in another location: you can track it using the tracking number on the express delivery receipt.
14
0
Share

Is there a way to avoid waiting ten days after failing the third driving test?

You must wait at least ten days before rescheduling a makeup test for Subject 3. Additional information: 1. Retake after failure: According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," each subject test can be taken once, and if failed, a makeup test is allowed once. If you do not take the makeup test or fail it again, the current test session ends, and the applicant must reschedule the test. However, Subject 2 and Subject 3 tests must be rescheduled at least ten days later. 2. Retake fee: A Subject 3 makeup test not only takes time but also costs money, which is certainly memorable for those who have experienced it. Generally, the retake fee for Subject 3 is around 300-400 yuan, but this is not the only standard, as retake fees are not uniform and vary from place to place.
13
2
Share

Can Adding Fog Lights Pass the Annual Inspection?

Adding fog lights can pass the annual inspection if it has been reported to the relevant authorities in advance. Here is a detailed introduction on the usage of car fog lights: 1. When visibility is between 200m-500m: There is no need to turn on the fog lights. However, the speed should not exceed 80km/h, and the distance between your vehicle and the one in front in the same lane must be kept at more than 150m. 2. When visibility is between 100-200m: Fog lights, low beams, width indicators, and taillights must be turned on. The speed should not exceed 60km/h, and the distance from the vehicle in front should be kept at more than 100m. 3. When visibility is between 50-100m: Fog lights, low beams, width indicators, and taillights must be turned on. The speed should not exceed 40km/h, and the distance from the vehicle in front should be kept at more than 50m.
20
2
Share

How to Check if There is a Tracker on Your Car?

Here are the methods to check if there is a tracker on your car: 1. Directly search the car (strong magnet, non-installation type): GPS trackers may be placed in relatively hidden locations, such as the rear bumper, inside or outside the doors, etc. 2. Check the wiring (wired type): Some GPS trackers are wired and need to be connected to the car's power lines. Therefore, to check for a tracker, you can search along the car's power lines. 3. Check the OBD port (OBD port type): By plugging into the OBD port, functions such as point naming, timed tracking, fuel consumption analysis, and driving optimization can be utilized, so the OBD port should also be checked when searching.
17
3
Share

Is Turbocharger Oil Leak Serious?

Turbocharger oil leak is serious. If a turbocharger exhibits oil leakage, it is necessary to identify the source of the leak and proceed with repairs. Additional information: 1. Turbo Pressure: In the past, when turbocharging technology was not widely adopted, the most direct way to increase engine power was to add more cylinders and increase displacement. Later, as turbocharging technology became widely used in automotive engines, increasing turbo pressure became the primary method to enhance power in turbocharged engines. 2. Turbocharging Principle: The principle of turbocharging is straightforward. A turbocharger consists of two main parts: the exhaust turbine and the compressor turbine. The impellers of the exhaust turbine and the compressor turbine are connected by the same shaft. When the engine reaches a certain speed, the exhaust gas has sufficient energy to drive the exhaust turbine, causing the compressor turbine to rotate and compress air.
10
5
Share

What is a car chip?

Automotive electronic chips, collectively referred to as automotive chips, are chips used in vehicles. Automotive chips are mainly divided into three categories, as detailed below: 1. Functional chips: Primarily refer to processor and controller chips. For a car to run on land, it relies on an electronic and electrical architecture for information transmission and data processing. The vehicle control system mainly includes several major parts: body electronic systems, vehicle motion systems, powertrain systems, infotainment systems, and autonomous driving systems. Under these systems, there are numerous sub-functions, each of which has a controller behind it. Inside each controller, there is a functional chip. 2. Power semiconductors: Mainly responsible for power conversion, often used in power supplies and interfaces, such as IGBT power chips for electric vehicles, and field-effect transistors (MOSFET) that can be widely used in analog and digital circuits. 3. Sensors: Mainly used in various radars, airbags, tire pressure monitoring, etc.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.